Stardom iTANK MT1-B31BP User manual

󵥄󱽢󶀲󳘍󲍍󷇤󸾇󱘎󷼲
󵍙󷮾󸎢󳻛
󵥄󱽢󱛔󵥌󴪒󳘍󱕥󹭢
󾙓󾙕󾙓󳐯󸴐󲰉󸀌󲴘󳊷
󵻓󵼟󴉓󳊬󱳎󳎕󵯔󱸯󱛔󵥌󱧗󲮨󲱬󹂩󴁮󲴙󳹆󵻓󵼟󴖧󶀲󵯔󲱬󹂩󾙋
󵧈󶟯󶣗󸶁󱚝󳼩󾙍󸏤󱲦󱘕󳘍󶆐󹠾󾙍󱗴󱨇󲴘󷆼󸝕󳸄󸸉󲚫󾙋
󵅂󱕞󵽎󱝬󶔳󶾩󱰖󶾩󵯔󴟽󳄜󸶁󱚝󾙍󸏤󲴌󸴠󳩻󶦹󳄜󳙿󳒋󷇤󹥧󷁷󶎙󱝬󳥱󸴠󳩻󾙋
󵧈󳕝󹥰󸅳󹞐󹜆󳟾󶆐󹠾󾙓󾙕󾙓󳼩󾙍󱱪󳏳󸳣󸶋󳕝󳡇󳲋󱚝󵯔󱚝󴑧󶟯󶣗󱓩󲒖󷼇󵻓󵼟󲰉󾈵󶆐󹠾󳎕󾙍
󳹂󸵂󷼇󶆐󹠾󾙕󾙔󸴠󳩻󶦹󳟾󹥧󴴰󶦹󵯔󱱣󱚝󾙋
󹥧󴴰󸬹󱨭󲑬󱸧󾈸󴁹󹥧󴴰󸬹󱨭󵯔󱰖󶾩󾙍󵇾󴩰󸵂󷼇󸝕󳸄󱣪󸬹󾙋
󷏖󳕝󱛔󵥌󵯔󳼎󾙕󾙔󸴠󳩻󶦹󾙍󱓻󴘣󶎙󵯔󹥰󵅂󾙕󾙔󾙔󸆉󴉓󳹂󱸯󸶟󱭞󾍐
󱚿󲮨󱸇󳵿󶾩󾙋
󳋼󵅗󳊈󸕓󹠾󱕞󱛔󵥌󾙓󾙕󾙓󵯔󸝕󳸄󱧗󲮨󱰖󶾩󲙼󾙍󸏤󹃂󲴕󹂧󸅳󸝕󳸄󱢶󱘙󱭞󱸢󱒪󱞶󱧗󲮨󸀌󶱭󱒶
󳟾󸶿󶎙󱢶󱘙󾙍󹤢󹂧󱢶󱘙󳕝󹂧󸅳󵯔󸝕󳸄󾙋󷏖󳕝󱧗󲮨󲍨󾙓󾙕󾙓󵯔󸝕󳸄󳬨󴢹󳟾󸸉󲚫󾙍
󲴌󱒹󸜘󱘕󱚑󵯔󸜫󱘕󾙋
󹜈󹞐󱬕󳉑󹭰󸊥󱠍󵅂󱚅󶱭󴟿󵔜󳙿󵅂󵥛󴉱󴘣󳟾󶐽󹥧󱜁󹥧󾙍󴟿󳼩󲴌󸾇󱘎󱓩󱔐
󸴠󳩻󶦹󱒪󶎙󳩻󲍨󾙓󾙕󾙓󵯔󾙕󾙔󾙔󲑬󲜿󱒶󲍍󴖧󶀲󾙓󵯔󱚅󶱭󾙍󱸢󱒪󶎙
󳩻󲍨󴉱󴘣󳟾󶐽󹥧󵯔󲑬󾙋
󹜈󹞐󲜿󱬫󳫘󷆹󱚅󶱭󾙍󴟿󵔜󳙿󵅂󱰗󳋼󾙓󾙕󾙓󵯔󹥧󴴰󹽥󱱣󶾩󱰒󾙍󴟿󳼩󹥰󲴌
󸾇󱘎󱓩󱔐󸴠󳩻󶦹󱒪󶎙󳩻󲍨󾙓󾙕󾙓󵯔󾙕󾙔󾙔󲑬󲜿󱒶󲍍󴖧󶀲󾙓󵯔󱚅
󶱭󾙍󱸢󱒪󶎙󳩻󲍨󴉱󴘣󳟾󶐽󹥧󵯔󲑬󾙍󱸢󲙼󱸯󱛔󵥌󳡧󴘣󵯔󱧺󹥧󲈜󾙗󾙓󾍐󲚜󱸯󱛔󵥌󷆹󾙗󾙔
󳟾󱛔󵥌󹥧󷁷󵯔󸴠󳩻󾙓󾙕󾙓󵯔󱧺󹥧󲑬󲜿󱒶󲍍󴖧󶀲󾙔󵯔󱚅󶱭󽙢󲜿
󱒹󲙼󳩻󱜁󹥧󾙍󾙓󾙕󾙓󴁮󵇾󴩰󴟽󳄜󲁑󱱣󾙍󹥰󲴌󹜈󹞐󱬫󳫘󷆹󱚅󶱭󾙍󳡪󱸯󴟽
󳄜󱛔󵥌󾙋
󲋶󱹉󳉑󵑡󵯔󾙔󾙗󾘧󶷗󹥧󵔜󳙿󱒹󱹒󾙍󱸯󶾩󴁮󵥄󵥀󴉱󴘣󳟾󶐽󹥧󱜁󹥧󱒹󸢪󾙍󱗴󷆼󴁹󵇾󴩰󴟽󳄜󲁑
󱱣󾙓󾙕󾙓󵯔󵔜󴩓󽙢󵧈󴟿󵔜󴩓󵯋󵥀󳼩󾙍󸏤󱜅󶐏󱕦󺝦󸎢󳻛󳲋󱚝󾙍󱰗󳋼󹥧󴴰󱜁󹥧󾙋󹥧󴴰󱜁󹥧󱒹󸢪󾙍
󴁮󵯋󵥀󱗴󱒷󵔜󳙿󽙡
󹥧󷁷󸯤󸔣󱒹󱭞󾙓󾙕󾙓
󸝕󳸄󵇾󴩰󱣪󸬹
󸝕󳸄󱣪󸬹󳼩󹂧󸅻󵯋󵥀󳸾󶦹󱩬󹂧󳸯󸴠󳩻󵯔󳖑󳍍
󸏤󴪒󳘍󾙓󾙕󾙓󵯔󱧺󹥧󲑬󱸧󶾩󳩻󱸉󾙗󾙓󾍐󺁷󱒹󱸯󸡤󸶋󾙗󾙔󽙢󷏖󱛔󵥌󸡤󸶋
󹠠󱭧󱔐󹥧󱰒󱜁󹥧󲴘󷆼󳘍󲙼󵯋󵥀󾙍󲴌󱒹󸜘󱘕󱚑󵯔󸜫󱘕󾙋
󾙓
󾙔
󾙕
󾙖
󾙗
󾙘
󾙙
󾙓
󾙔
󾙕
󾙖
󳘬󸒡󳕝󱛔󵥌󹉐󹈽󶅎󳢸󶻨󱘙󴁹󹠠󱨿󱸻󵯔󵥄󱽢󾙋
󴂸󳡧󱩩󸀖󵯔󸝕󸉜󲍨󱬕󵑙󱮇󹤚󵈨󳂷󶤛󷾩󸌭󶡙󵽎󸍣󾙍󱙺󲳉󹢣󵥄󱽢󸆉󴉓󲴌󳂷󱬕󸜤󳼩󵅂󴴸󽙢󱘕󱚑󵯔󵥄󱽢󸆉󴉓󳟾
󵲉󹞐󸝕󸉜󴁍󳸯󾙍󸏤󳕝󵲃󳩻󱒶 www.STARDOM.com.tw󶥢󶍨󴇉󸌋󾙍󳟾󵲃󳩻󷇤󳕝󵯔󴑧󱱪󶺅󶢺󶋍󱸟󶺅󶫵󾙍
󴂸󱨿󱸻󲴌󱒹󱸢󷼇󸴂󵸔󾙋
󲜿󴅞󳕝󲴕󹉐󹈽󶅎󳢸󵯔󵥄󱽢󴁹󱘕󱚑󵧰󲀷󾙍󳟾󳼎󳗗󵙃󳎣󾍐󳸯󵥄󱽢󸉜󳓽󾙊󱛔󵥌󳡧󱩩󳟾󹫼󺁪󾙍󸏤󳕝󶺅󶢺
[email protected]󾙍󳟹󱟀󲴌󱦦󸴐󲋲󸅻󳕝󾙋
󴂸󸎢󳻛󵲉󹞐󵥄󱽢󱨱󲱬󴠟󹉐󹈽󶅎󳢸󶻨󱘙󴁹󹠠󱨿󱸻󵑙󴝘󳡇󴁹
󱮇󸆓󲍍
󶼾󸆓󲍍
󵻓󵼟󸕷󱸇󵍙
󵻓󵼟󳤊󱸇󵱍󳣈󳡧
󵻓󵼟󱵐󴓙󳥿󹏘
󱧺󹥧󲑬
󱸧󾈸󴁹󹥧󴴰󸬹󱨭󱰖󶾩
󹜈󹞐
󾙕󾙔󾙔󲑬󾙓󾙒
󳡳󹜈󱲯󸀌󲙼󵱍󳎕󾙍󱲯󸀌󱨱󲱬󳝶󱲯󱺃󱒷󱬼󶡿󱘎
󵥄󱽢󸾇󱘎󷼲
󾙕󾙔󸴠󳩻󶦹󾙓󾙓󾙕󾙓󱓻󺁪󾙓
󳐯󸴐󲰉󸀌󲴘󳊷󾙓
󾙒󾙓󾙔󾙒󾙔󾙓
銳銨科技
󴪒󳘍󽙡󹜈󲁑󵥄󱽢󹥧󴴰󱮇󾙍󸏤󵽎󸍣󵥄󱽢󷇤󱓻󴘣󶎙󹜈󴘣󵔜󳙿󳂷󸴠󳩻󾙍󱹷󱭿󵥄󱽢󲴌󸵂󱨭󱘵󵳅󵔜󳙿󾙋
󸏤󱷪󵊉󱒷󱬼󴠁󹾘󾙍󲰏󳟸󾙓󾙕󾙓󵯔󵻓󺁪󲰉󸀌
󾙓󲴌󶟯󶣗󳳦󳵳󳹆󶉚󲌟󳅷󱸱󾙍󱓟󵽎󸍣󳶨󵌥󹱉󳡙󱸟󴨐󴁹󷾩󱩎󱗟󵒜󺁪󳲈󱚊󾙍󶟯󶣗󲋭󱻟󴁹󸷙󵧈󵯔󳶨󵌥󶉿󹜕󾙋
󳳦󳵳󵡌󲖀󸏤󸸗󱨇󳩻󸱆󴻋󴾄󳟾󱩎󱗟󳻥󲴕󵥄󱽢󸴔󳟸󳬨󱣰󵯔󵡌󲖀
󽙙󱛔󵥌󸾇󱘎󱨱󹠎󵯔󹭝󹃂󳫆󱨭󵻓󵼟󳤊󱸇󵱍󹭝󹃂󲮠󳎕󾙍󳤊󱸇󵱍󹛼󹛾󲴌󴁮󸫭󳌛󹜈󲁑󾙍󱜹󱸯󱸇󱬕󳤊󱸇󵱍󾙋
󾙕󲰉󸀌󾙔󾙗󱹑󵻓󵼟󲰉󸀌󷆹󳤊󱸇󵱍󱒶󾙋
󵻓󺁪󲰉󸀌
󸏤󱧾󵽎󸍣󵲉󹞐󸾇󱘎󷇤󵥄󱽢󴂸󸩑󳼎󱹷󴁹󱸉󳬨󳟾󳼎󶰎󲴞󸾇󱘎󾙍󷏖󴁹󱘕󱚑󵧰󲀷󾙍󸏤󷇤󳕝󵯔󶤛󹉙󲀫󳟾
󴑧󱱪󱖶󱾇󶺅󶢺󾙋
󸏤󱮇󳎃󲰨󶥢󱒷󸫝󸎢󳻛󴁕󾙊󹽥󱱣󾐍󳊬󱗴󱷸󱩎󹵁󵲉󹞐󸝕󴴰󾙋


󾙖
󾙗
󾙘
󵻓󵼟󲰉󸀌󲰏󳟸󳎕󾙍󸏤󲴌󳤊󱸇󵱍󳅷󶆐󳵳󱨭󱓻󴘣󱨱󾙍󱓟󹞐󱒶󳣈󳡧󾙋
󲴌󵲉󹞐󸴠󳩻󶦹󳩻󱒶󾙍󶡙󶔳󸏤󵲨󱒷󱒪󱞶󶍷󶔳󾙋
󵻓󺁪󲰉󸀌󲰏󳟸󾙋󹜈󲁑󹥧󴴰󳎕󸏤󸳣󸶋󱚝󴑧󶟯󶣗󸵂󷼇󳎕󶬼󴉓󳊬󱳎󸊥󲰬󾙋󸏤󱜅󵊉󹥧󷁷󱚝󴑧󶟯󶣗󳥹󶀲
󸵂󷼇󵻓󵼟󴉓󳊬󱳎󾙍󲰏󳟸󵻓󵼟󴉓󳊬󱳎󳎕󾙍󱜹󱸯󱗴󸵂󷼇󸝕󳸄󵯔󸕷󲳖󾙋

󹜈󹞐
12
󹭝󹃂󹗕󱳕
狀態 硬碟狀態燈
無硬碟 藍燈熄滅
資料存取 藍燈閃爍
硬碟閒置 藍燈恆亮
電腦休眠 藍燈熄滅


If the factory default setting of the Power Select switch is USB position (this state is powered
by a desktop or laptop), connect one end of the USB cable in the accessory to the USB 3.2
Gen2 Type-C port of the MT1-B31BP (as shown in position 1 above), and the other end to
the USB port of the desktop or laptop.
If the Power Select switch is switched to DC position (this state is to enhance the power
driving capability of MT1-B31BP), you should connect one end of the USB cable in the
accessory to the USB 3.2 Gen2 Type-C port of MT1-B31BP (as shown in the position
marked 1 above) and the other end to the USB port of the desktop or laptop. The other end
is connected to the USB port of the desktop or laptop. In addition, you can use the 5V/1A
charger of the cell phone (up to 5V/2A) or use the USB Type-C of the computer to connect
to the USB Type-C for Power Input of the MT1-B31BP (as shown in the position labeled 2
above); without external power supply, the MT1-B31BP will not be able to boot up normally,
so you need to switch the Power Select switch to the USB position. The MT1-B31BP will not
start normally without external power supply, and you need to switch the Power Select
switch to the USB position to use it normally.
Due to the different power consumption status of 2.5 HDD/SSD, the MT1-B31BP may not
start normally due to insufficient power supply to the desktop or laptop. If the power supply is
insufficient, the following conditions will occur:
a. The computer cannot recognize the MT1-B31BP
b. Data cannot be transmitted
c. Data transmission will be repeatedly disconnected and reconnected.
Please note that the MT1-B31BP's USB Type-C charging port can only accept 5V/1A
(maximum 5V/2A); STARDOM will not be held responsible for any accidents caused by
using more power than the limit.
1.
2.
3.
4.
12

MT1-B31BP Quick Setup Guide
Product Illustration and Parts List
The Indication of HDD Status
Please follow the instructions below to complete the hardware installation.
Hardware Installation
Thank you for choosing STARDOM’s product.
The information provided in this manual was checked before publication, but the actual product
specications may have changed before shipping; Latest product specications and updates can be found
at www.STARDOM.com.tw or through your sales representative. No separate notications will be
provided by our company.
If you have any questions about RAIDON products or would like to receive the latest product information,
instruction manuals, or rmware, please contact [email protected].tw for assistance.
All product-related content in this manual are copyrighted by RAIDON TECHNOLOGY, INC.
The usable storage capacity of the hard disk after formatting will be less than the capacity
indicated on the hard disk.
To prevent data loss, do not remove MT1-B31BP while the system is running.
Please always connect the USB cable to the computer to ensure the energy saving function
operating normally.
If the MT1-B31BP needs to be shut down or disconnected, please ensure the HDD is safely
removed through your operating system before turning off the power.
The USB Type-C for Power Input only functions as a power input and cannot be used for
data transfer.
If you are using a USB 3.2 C to A cable, the Type-A on the host side must be USB 3.2 Gen2
for best access performance.
We strongly recommend backing up important data stored on the MT1-B31BP to another
storage device or a remote site. STARDOM will not be held liable for the damage or loss of
data you stored on the MT1-B31BP.
1.
2.
3.
4.
5.
6.
7.
HDD access light
HDD tray handle
HDD tray ejection hole
Power select switch
USB Type-C for Power Input
(Power input only)
USB 3.2 Gen2 Type-C port (10Gbps) 1.
2.
Stardom Storage Solutions
󾙒󾙓󾙔󾙒󾙔󾙓
Front View Rear View
NOTE:
Please make sure that the product is connected to the host (power on status) before turning
on the power, otherwise the product will be on the sleep mode.
Place the system on a stable surface. Ensure that the vent is not blocked and that it is
installed in a well-ventilated area. (Please keep the product away from moisture and other
environment that might be harmful to the product)
Use the ejector pin included in the accessory kit to eject the HDD enclosure handle, and
then pull tray handle to remove it.
When the HDD installation has been completed, insert the tray into the system horizontally
and secure the latch into place.
Connect the relevant cables, please see the next section for details.
After completing hardware installation, turn on the power and follow the instruction of Disk
Utility to format the HDD, you then could start using your new MT1-B31BP.
4.
5.
6.
Mount the 2.5" HDD onto the
removable tray.
3.
Please check the product and accessories for any defect or missing parts. If you have any
questions, please contact your product supplier.
Please go to the official website (www.stardom.com.tw) to download manuals, drivers and
other related resources.
The following items should be inside the package upon opening:
●
●
󵥄󱽢󸾇󱘎󷼲
USB 3.2 Cable x1MT1-B31BP Device x1
Quick Setup Guide x1 Ejector pins
Status HDD Status Light
No HDD Blue light off
Data access Blue light flashing
HDD idle Blue light always on
Sleep mode Blue light off