StarTech.com ICUSBCPLLD25 User manual

Quick-start guide
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 09/25/2017
For the latest information, technical specications, and support for
this product, please visit www.StarTech.com/ICUSBCPLLD25.
Package contents
• 1 x parallel printer adapter cable
• 1 x quick-start guide
ICUSBCPLLD25
USB-C™ to DB25 Parallel Printer Adapter Cable
Requirements
• USB Type-C™ port
• Printer with DB25 connector
• Computer system running any of the following operating systems:
• Windows® 10
• Windows 8.1
• Windows 7
• Windows Server® 2016
• Windows Server 2008 R2
• Windows Server 2012 R2
• macOS 10.12
• macOS 10.11
• Linux® 2.6.xto 4.4.xLTS versions only
Requirement are subject to change. For the latest requirements,
please visit www.StarTech.com/ICUSBCPLLD25.
The required drivers automatically install when you connect the
ICUSBCPLLD25 to your computer system and you aren’t required to
install any additional drivers or software.
Product diagram
USB-C connector DB25 connector
Connect the ICUSBCPLLD25
If your operating system doesn’t automatically install the printer
drivers, you need to download and install the printer drivers before
you complete the following steps.
1. Turn o your printer.
2. Connect the DB25 connector on the parallel printer adapter cable
to your printer.
3. Turn on your printer and computer system.
4. Connect the USB-C connector on the parallel printer adapter
cable to a USB port on your computer system.
When your computer system detects the parallel printer adapter
cable, it automatically downloads the necessary software to support
the adapter cable and the printer.
DB25 female pinout
Pin Description
1 NSTROBE
2DATA 0
3DATA 1
4DATA 2
5DATA 3
6DATA 4
7DATA 5
8DATA 6
9DATA 7
10 NACK
11 BUSY
12 PERROR
13 SELECT
Pin Description
14 NAUTOFD
15 NFAULT
16 NINIT
17 NSELECTIN
18 GND
19 GND
20 GND
21 GND
22 GND
23 GND
24 GND
25 GND

FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)
to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all
trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le
fonctionnement.
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access
our comprehensive selection of online tools, documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two-year warranty.
In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned
for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,
consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow
the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.