StarTech.com SVID2USB2 User manual

Video Capture Cable
SVID2USB2 Instruction Manual
Actual product may vary from photo
USB 2.0 Video Capture Cable

FFCCCCCCoommpplliiaanncceeSSttaatteemmeenntt
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
UUsseeooffTTrraaddeemmaarrkkss,,RReeggiisstteerreeddTTrraaddeemmaarrkkss,,aanndd
ootthheerrPPrrootteecctteeddNNaammeessaannddSSyymmbboollss
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and
do not represent an endorsement of a product or service by StarTech.com, or an
endorsement of the product(s) to which this manual applies by the third-party company in
question. Regardless of any direct acknowledgement elsewhere in the body of this
document, StarTech.com hereby acknowledges that all trademarks, registered
trademarks, service marks, and other protected names and/or symbols contained in this
manual and related documents are the property of their respective holders.

TTaabblleeooffCCoonntteennttss
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Installing the drivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Installing the GrabBee Multimedia Application . . . . . . . . . . . . . . . . . . .3
Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
GrabBee Multimedia Application operation . . . . . . . . . . . . . . . . . . . . .4
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Accessories available from StarTech.com . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Technical Support & Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . .10
Instruction Manual
i

IInnttrroodduuccttiioonn
FFeeaattuurreess
BBeeffoorreeYYoouuBBeeggiinn
Instruction Manual
1
Thank you for purchasing a StarTech.com USB 2.0 Video Capture Card. The ideal
solution for portable A/V applications, this product offers real-time MPEG 1, 2 and 4
recording, providing a perfect bridge between your computer and VCR, camcorder or any
other S-Video source. Small enough to fit in the palm of your hand, SVID2USB2
integrates seamlessly with notebook and desktop computers.
• Portable form factor for on-the-go applications
• Offers USB 2.0 transfer rates (480Mbps) for high quality video capturing
• Up to 30 fps motion capture capability at resolutions up to 720x480(NTSC) /
720x576(PAL)
• SnapShot function allows you to capture still images
• Brightness, contrast and sharpness controls offer an optimized viewing experience
• Supports NTSC, PAL, and SECAM formats
System Requirements
• Pentium 4 based or equivalent PC, with an available USB 2.0 port
• 128MB RAM
• Windows 2000 SP3 or above, Windows XP SP1 or above
• Sound card
Contents
This package should contain:
• USB 2.0 Video capture cable
• Installation and Driver CD
• Instruction manual

IInnssttaallllaattiioonn
Prior to installing this device, please ensure that your computer has an available USB2.0
port, and that your operating system has been updated according to the most recent
revisions (Windows XP SP1, Windows 2000 SP3 etc.). Also, please ensure that the
USB2.0 host driver is updated according to the most modern version available.
***Please note: Before connecting SVID2USB2 to your computer, please ensure
that the necessary drivers have been installed.
Installing the drivers
1. Please insert the Multimedia Installation Kit CD into your CD or DVD-ROM drive.
2. Locate the folder entitled Driver, located in the GrabBee X + Deluxe folder on the
Driver CD. Double-click on the Setup.exe file to launch the InstallShield Wizard. Once
this window launches, please click on Next:
2. The multimedia software will install automatically. Once complete, you will be notified
that Setup has finished installing USB Video/Audio Driver on your computer.
Please click Finish:
3. To complete the Setup Wizard installation process, please restart your computer.
Once the computer has been rebooted, please insert the USB connector provided by
SVID2USB2 into an available USB 2.0 slot on the computer. Windows will then
automatically detect the connected device and conclude the necessary software
installation.
Instruction Manual
2

4. To verify that the installation was successful, locate and right-click on the My
Computer icon (located on desktop or in Start menu), and select Manage. This will
launch the Computer Management utility. Click on Device Manager, and click on the
[+] symbol located next to Sound, video and game controllers, where you will now
see two new additions - USB 2.0 A/V Converter and USB EMP Audio Device:
Please note: Although the multimedia application packaged with SVID2USB2 is
designed specifically for use with this device, it is not required for use.
For information about third party alternatives, please consult your local
computer store or computer manufacturer for more information.
Installing the GrabBee Multimedia Application
1. Please insert the Multimedia Installation Kit CD into your CD or DVD-ROM drive.
2. Locate the folder entitled AP Software, located in the GrabBee X + Deluxe folder on
the Driver CD. Double-click on the Setup.exe file to launch the InstallShield Wizard.
Once this window launches, please click on Next.
3. The screen that follows will ask you to select the installation destination. Please enter
an appropriate path (if it varies from the default), and click Next.
4. When the Windows Media Format 9 Series Runtime Setup launches, please click
Yes. To advance, please click Yes, when the License agreement is displayed. Once
you are notified that installation has completed, please click OK.
5. You will then be prompted to install Windows Media Tools. Please click Yes, and
proceed through the installation steps, by clicking Next and Yes where applicable. To
conclude installation, please click on Finish.
6. Once the software has been installed, you may be prompted to reboot your computer.
Please do so.
Instruction Manual
3

SVID2USB2 - Hardware
Please note: If you are using Windows 2000, please connect the audio from your
external A/V device to the line-in port on your sound card.
In order to launch the Multimedia application, you will first be required to connect the
SVID2USB2 Video Capture Cable to your computer. Once the USB connection has been
made, you will be able to configure the settings for the device, using the instructions
below.
GrabBee Multimedia Application Operation
Following the installation of the GrabBee software, you will notice three new icons
located on your desktop:
Instruction Manual
4
Click to launch the
main program
Click to
view
recorded
files
Click to view captured
still image files
USB
Connector
Audio L/R
Input
S-Video
Input
Composite
Video Input

To launch the main application, please click on the GrabBee icon. Once the application
launches, you will see the following:
Option
Click on Option on the control panel (illustrated above) to launch the following screen:
Under the General tab, you will see the following:
a)
Hard disk space information
b) Snapshot default storage path - The location to which captured images will be stored.
c)
Clip default storage path - The location to which captured video clips will be stored.
d) Video Format - Allows you to choose the video input being used
e)
Set Recording Time - Allows you to set the recording length
Instruction Manual
5
Right-click on the Video
Window to launch the
function menu, where you
will be able to select video
resolution and screen size:

Under the Encoder Property tab:
a)
Video Setting - Recording file format
b)
Profile - Video size, Frame Rate, Video quality, Video Bit Rate setting
Video Input
Allows you to switch between Composite or S-Video input
Slide Bar
Move to any video position during playback
Color Setting
Brightness / Contrast / Hue / Saturation adjustment
Mute
Volume On / Off
Pause
Pause the playback file
Record
When you click this button, video recording will begin. If you click the Stop button, a
table will be displayed asking you to rename or save the file. The default file name is
MDDHHMMSS, (i.e. Month, Date, Hour, Minute, Second).
Stop
Stop recording or playback
Playback
Play the recorded file
SnapShot
Image capture resolution will match that of the Video Window (preview window). Clicking
on SnapShot will launch the following table:
Instruction Manual
6

Album
The Album will display all captured files, including images and video. Please click Clips
or Images, where you will be able to locate each file name, or preview the recorded
video.
Full Screen mode
Double-click the left mouse button inside the Video Window (preview window) to switch
between full screen and previous screen sizes.
SSppeecciiffiiccaattiioonnss
Instruction Manual
7
Bus Type USB
Connectors
1 x S-Video Female Connecter
1 x RCA Composite Video Connecter
1 x RCA Stereo Audio Connecter
Regulatory Certifications FCC, CE, ROHS