StarTech.com IREXT2 User manual

Manual Revision: 03/26/2013
For the most up-to-date information, please visit: www.startech.com
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
IREXT2
Wireless Infrared IR Remote Extender - 330 ft (100m)
*actual product may vary from photos

Instruction Manual
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not
represent an endorsement of a product or service by StarTech.com, or an endorsement of the
product(s) to which this manual applies by the third-party company in question. Regardless
of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the property of
their respective holders.

Instruction Manual
i
Table of Contents
Introduction ............................................................................................1
Packaging Contents ................................................................................................................................. 1
System Requirements .............................................................................................................................. 1
Installation ..............................................................................................1
Working without extender probe ....................................................................................................... 1
Working with extender probe .............................................................................................................. 2
Specications ..........................................................................................3
Technical Support ..................................................................................4
Warranty Information ............................................................................4

Instruction Manual
1
Introduction
Packaging Contents
• 1 x IR Extender transmitter
• 1 x IR Extender receiver
• 1 x IR extender probe
• 2 x 12VDC, 250mA power adapters
System Requirements
• Available power outlets near transmitter and receiver locations
• IR controlled device with remote
Installation
1. Connect one of the provided AC power adapters to an available power outlet,
then to the DC jack on the back of the IREXT2 receiver unit.
2. Situate the unit labeled “Receiver”, near the device you wish to control remotely
(Television, Home Theater Receiver etc.). If you are not using the probes outlined
in the following step, position the IR receiver unit to face the IR sensor receiving
window of the device you are controlling. Note the distances outlined in the
diagram for best performance.
Working without extender probe

Instruction Manual
2
4. If using the included probe(s) situate the IR Extender Probe near the IR sensor
receiving window of the device you wish to control. The probe should be within
0.5m and at angles +/- 15°.
Working with extender probe
5. Insert the metal connector provided by the probe, into the IR Extender port
located on the back of the Receiver unit.
6. Extend the antenna on the receiver unit and position it vertically.
7. Situate the unit labeled “Transmitter”, near the location from which you wish
to initiate control, ensuring that an available power outlet is easily accessible.
8. Connect the remaining AC power adapter to an available power outlet, then
to the DC jack on the back of the IREXT2 transmitter unit.
9. Extend the antenna on the transmitter unit and position it vertically.
10. The Infrared Extender is now ready for use.

Instruction Manual
3
Specications
Color Gray
Enclosure Type Plastic
Transmission Frequency 433.92 MHz +/-1 MHz
IR Frequency 30kHz - 60kHz
Power Gain 10 dBM
Maximum Transfer Distance 100 m / 330 ft
Power Adapter 12V DC, 250 mA
Dimensions (L x W x H) 93 x 65 x 32 mm
Weight 267 g
Operating Temperature 0°C to 43°C (32°F to 109°F)
Storage Temperature -20°C to 60°C (-4°F to 140°F)

Instruction Manual
4
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to
provide industry-leading solutions. If you ever need help with your product, visit
www.startech.com/support and access our comprehensive selection of online tools,
documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two year warranty.
In addition, StarTech.com warrants its products against defects in materials
and workmanship for the periods noted, following the initial date of purchase.
During this period, the products may be returned for repair, or replacement with
equivalent products at our discretion. The warranty covers parts and labor costs only.
StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their
ocers, directors, employees or agents) for any damages (whether direct or indirect,
special, punitive, incidental, consequential, or otherwise), loss of prots, loss of business,
or any pecuniary loss, arising out of or related to the use of the product exceed the
actual price paid for the product. Some states do not allow the exclusion or limitation
of incidental or consequential damages. If such laws apply, the limitations or exclusions
contained in this statement may not apply to you.

Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.
StarTech.com is your one-stop source for every connectivity part you need. From
the latest technology to legacy products — and all the parts that bridge the old and
new — we can help you nd the parts that connect your solutions.
We make it easy to locate the parts, and we quickly deliver them wherever they need
to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to
the products you need in no time.
Visit www.startech.com for complete information on all StarTech.com products and
to access exclusive resources and time-saving tools.
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology
parts. StarTech.com was founded in 1985 and has operations in the United States,
Canada, the United Kingdom and Taiwan servicing a worldwide market.