StarTech.com ST121WHD2 User manual

DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 04/27/2015
For the most up-to-date information, please visit: www.startech.com
Quick Install Guide
Package Contents
• 1x Wireless transmitter
• 1x Wireless receiver
• 1x IR blaster
• 1x IR receiver
• 2x Mounting brackets
• 2x Universal power adapters (NA/EU/UK/AU)
• 1x Quick start guide
ST121WHD2
Wireless HD video extender for HDMI – 165ft (50m)
*actual product may vary from photos
Product Overview
Wireless transmitter
Wireless receiver
HDMI input port
IR blaster
output port
USB port (rmware
updates only)
Power
connector
Front view
Side view
HDMI output port
IR blaster
input port
USB port (rmware
updates only)
Power
connector
Front view
Side view
System Requirements
• HDMI source device with required cabling (i.e. computer, Blu-ray
Player)
• HDMI display device with required cabling (i.e. television,
projector)

FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void the user’s authority to operate the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
IC Radiation Exposure Statement
This equipment complies with IC RSS-102 radiation exposure limit set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0.5cm between the radiator and
your body.
Déclaration d’exposition à la radiation
Cet équipement respecte les limites d’exposition aux rayonnements IC dénies pour un environnement non contrôlé. Cet équipement doit être installé et mis en marche à une distance minimale de 0.5 cm qui sépare
l’élément rayonnant de votre corps.
L’émetteur ne doit ni être utilisé avec une autre antenne ou un autre émetteur ni se trouver à leur proximité.
FCC ID:xxx
IC:xxx
The Country Code Selection feature is disabled for products marketed in the US/Canada
The device, for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this
manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all trademarks, registered
trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our
comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a one year warranty. In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this
period, the products may be returned for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or
damages arising from misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or
otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of
incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.
Installation
Installing the wireless transmitter
1. Position the wireless transmitter near your video source device
(i.e. Computer, Blu-ray Player).
2. Connect the video output on your HDMI source device to the
HDMI input port on the wireless transmitter, using an HDMI cable
(not included).
3. (Optional) If you’re using the wireless video extender to
transmit an infrared (IR) signal, connect the IR blaster to the IR
blaster output port on the wireless transmitter, and position the
extended bulb of the IR blaster directly in front of the IR sensor on
your HDMI source device. Check the manual of your HDMI source
device for the IR sensor location.
4. Using one of the included power adapters, connect the wireless
transmitter to an available electrical outlet.
The wireless transmitter is now installed.
Installing the wireless receiver
1. Position the wireless receiver near your HDMI display (i.e.
television, projector).
2. Connect the HDMI output port on the wireless receiver to the
input on your HDMI display, using an HDMI cable (not included).
3. (Optional) If you’re using the wireless video extender to transmit
an infrared (IR) signal, connect the IR receiver to the IR receiver
input port on the wireless receiver, and position the extended
bulb of the IR receiver in the general area you would like to point
your IR control.
4. Using one of the included power adapters, connect the wireless
receiver to an available electrical outlet.
The wireless receiver is now installed and your HDMI source will
be wirelessly transmitted to your HDMI display.
Notes:
• The maximum distance between the transmitter and the receiver
is 50 meters. If the wireless signal is obstructed by walls, or other
interference the signal quality and maximum distance will likely be
reduced.
• When extending infrared, this product can only support an IR
signal in the 38 kHz carrier modulation mode.