Starwin FL30P-M Series User manual

1
www.starwincom.com
Tel: [phone], E-mail: [e-mail]
Starwin
uSat Flat-Panel Portable (Manual) Terminal
Name: Flat Panel Integrated Satellite Communication Terminal
Model Number: FL30P-M/FL30P-E
Legal Rights
FL30P-E/FL30P-M uSat Flat Terminal
Make Satellite Simple & Easy
Make Antenna of the future

2
www.starwincom.com
Tel: [phone], E-mail: [e-mail]
© Copyright 2019 China Starwin Science & Technology Co., Ltd. All rights reserved.
The material contained herein is proprietary, privileged, confidential and owned by China
Starwin or its third party licensors. No disclosure thereof shall be made
to third parties without the express written permission of China Starwin Science & Technology
Co., Ltd.
China Starwin Science & Technology Co., Ltd. reserves the right to alter the equipment
specifications and descriptions in this publication without prior notice. No part of this
publication shall be deemed to be part of any contract or warranty unless specifically
incorporated by reference into such contract or warranty.
Statement of Conditions
The information contained in this manual is subject to change without prior notice.
China Starwin Science & Technology Co., Ltd. shall not be liable for errors contained herein or
for incidental or consequential damages in connection with the furnishing, performance, or use
of this manual or equipment supplied with it.
Warranties and Disclaimers
All China Starwin Science & Technology Co., Ltd. (“China Starwin”) products purchased from
China Starwin or through any of its authorized by China Starwin distributors, resellers and
agents are subject to the following warranty and product liability terms and conditions.
Exclusive Warranty
China Starwin warrants that the Product hardware it supplies and the tangible media on which
any software is installed, under normal use and conditions, will be free from significant defects
in materials and workmanship for a period of twelve (12) months from the date of delivery of a
given Product to Purchaser (the "Warranty Period"). China Starwin will, at its sole option and as
Purchaser's sole remedy, repair or replace any defective Product in accordance with China
Starwin standard R&R procedure.
CHINA STARWIN SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING
AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT
DOES NOT EXIST OR WAS CAUSED BY PURCHASER'S OR ANY THIRD
PERSON'S MISUSE, NEGLIGENCE, IMPROPER INSTALLATION OR IMPROPER
TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR, OR ANY OTHER CAUSE
BEYOND THE RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE,
LIGHTNING OR OTHER HAZARD.

3
www.starwincom.com
Tel: [phone], E-mail: [e-mail]
Disclaimer
(a) THE PRODUCT IS SOLD ON AN "AS IS" BASIS. CHINA STARWIN, ITS AFFILIATES
OR ITS LICENSORS MAKE NO WARRANTIES, WHATSOEVER, WHETHER EXPRESS
OR IMPLIED, WITH RESPECT TO THE SOFTWARE AND THE ACCOMPANYING
DOCUMENTATION. CHINA STARWIN SPECIFICALLY DISCLAIMS ALL IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
AND NON-INFRINGEMENT WITH RESPECT TO THE SOFTWARE. UNITS OF PRODUCT
(INCLUDING ALL THE SOFTWARE) DELIVERED TO PURCHASER HEREUNDER ARE
NOT FAULT-TOLERANT AND ARE NOT DESIGNED, MANUFACTURED OR INTENDED
FOR USE OR RESALE IN
APPLICATIONS WHERE THE FAILURE, MALFUNCTION OR INACCURACY OF
PRODUCTS CARRIES A RISK OF DEATH OR BODILY INJURY OR SEVERE
PHYSICAL OR ENVIRONMENTAL DAMAGE ("HIGH RISK ACTIVITIES"). HIGH
RISK ACTIVITIES MAY INCLUDE, BUT ARE NOT LIMITED TO, USE AS PART OF
ON-LINE CONTROL SYSTEMS IN HAZARDOUS ENVIRONMENTS REQUIRING
FAIL-SAFE PERFORMANCE, SUCH AS IN THE OPERATION OF NUCLEAR
FACILITIES, AIRCRAFT NAVIGATION OR COMMUNICATION SYSTEMS, AIR
TRAFFIC CONTROL, LIFE SUPPORT MACHINES, WEAPONS SYSTEMS OR
OTHER APPLICATIONS REPRESENTING A SIMILAR DEGREE OF POTENTIAL
HAZARD. CHINA STARWIN SPECIFICALLY DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY OF FITNESS FOR HIGH RISK ACTIVITIES.
(b) PURCHASER'S SOLE REMEDY FOR BREACH OF THE EXPRESS WARRANTIES
ABOVE SHALL BE REPLACEMENT OR REFUND OF THE PURCHASE PRICE AS
SPECIFIED ABOVE, AT CHINA STARWIN’S OPTION. TO THE FULLEST EXTENT
ALLOWED BY LAW, THE WARRANTIES AND REMEDIES SET FORTH IN THIS
AGREEMENT ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OR
CONDITIONS, EXPRESS OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW,
STATUTORY OR OTHERWISE, INCLUDING BUT NOT LIMITED TO WARRANTIES,
TERMS OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, SATISFACTORY QUALITY, CORRESPONDENCE WITH DESCRIPTION,
NON-INFRINGEMENT, AND ACCURACY OF INFORMATION GENERATED. ALL OF
WHICH ARE EXPRESSLY DISCLAIMED. CHINA STARWIN’ WARRANTIES HEREIN
RUN ONLY TO PURCHASER, AND ARE NOT EXTENDED TO ANY THIRD PARTIES.
CHINA STARWIN NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO
ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE,
INSTALLATION, MAINTENANCE OR USE OF ITS PRODUCTS.
Limitation of Liability
(a) CHINA STARWIN SHALL NOT BE LIABLE TO THE PURCHASER OR TO ANY THIRD

4
www.starwincom.com
Tel: [phone], E-mail: [e-mail]
PARTY, FOR ANY LOSS OF PROFITS, LOSS OF USE, INTERRUPTION OF
BUSINESS OR FOR ANY INDIRECT, SPECIAL, INCIDENTAL, PUNITIVE OR
CONSEQUENTIAL DAMAGES OF ANY KIND, WHETHER ARISING UNDER
BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY
OR OTHERWISE AND WHETHER BASED ON THIS AGREEMENT OR
OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
(b) TO THE EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL
THE LIABILITY FOR DAMAGES HEREUNDER OF CHINA STARWIN OR ITS
EMPLOYEES OR AGENTS EXCEED THE PURCHASE PRICE PAID FOR THE PRODUCT
BY PURCHASER, NOR SHALL THE AGGREGATE LIABILITY FOR DAMAGES TO ALL
PARTIES REGARDING ANY PRODUCT EXCEED THE PURCHASE PRICE PAID FOR
THAT PRODUCT BY THAT PARTY (EXCEPT IN THE CASE OF A BREACH OF A
PARTY'S CONFIDENTIALITY OBLIGATIONS).
Electronic Emission Notices
Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operation.
Safety Considerations
For the following safety considerations, "Instrument" means the ‘satellite terminal Flat Terminal’
units, components and their cables.
It is necessary to read the instructions carefully before using the satellite terminal flat portable
terminal. The terminal usage shall be carried out in accordance with the described steps and
methods to ensure the safety and accuracy of equipment operation.
Radio
The instrument transmits radio energy during normal operation. To avoid possible harmful
exposure, to this energy, do not stand or work for extended periods of time in front of its antenna.
The long-term characteristics or the possible physiological effects of Radio Frequency
Electromagnetic fields have not been yet fully investigated.
Caution
1. To avoid electrical shock, do not perform any servicing unless you are qualified to do so.
2. Before connecting this instrument to a power source, make sure that the voltage of the
power source matches the requirements of the instrument.

5
www.starwincom.com
Tel: [phone], E-mail: [e-mail]
Disposal of Electronic and Electrical Waste
Pursuant to the WEEE EU Directive electronic and electrical waste must not be disposed of with
unsorted waste. Please contact your local recycling authority for disposal of this product.
Important Notice
This user manual is delivered subject to the following conditions and restrictions:
▪This manual contains proprietary information belonging to China Starwin Science &
Technology Co., Ltd. Such information is supplied solely for the purpose of assisting
properly authorized users of the respective China Starwin products.
▪No part of its contents may be used for any other purpose, disclosed to any person or firm
or reproduced by any means, electronic and mechanical, without the express prior written
permission of China Starwin Science & Technology Co., Ltd.
▪The text and graphics are for the purpose of illustration and reference only. The
specifications on which they are based are subject to change, without prior notice.
▪The software described in this document is furnished under a license. The software may be
used or copied only in accordance with the terms of that license.
▪Information in this document is subject to change without prior notice.
▪Corporate and individual names and data used in examples herein are fictitious, unless
otherwise noted.
▪China Starwin Science & Technology Co., Ltd. reserves the right to alter the equipment
specifications and descriptions in this publication without prior notice. No part of this
publication shall be deemed to be part of any contract or warranty unless specifically
incorporated by reference into such contract or warranty.
▪The information contained herein is merely descriptive in nature and does not constitute an
offer for the sale of the product described herein.
▪Any changes or modifications of the equipment, including opening of the equipment when
not expressly approved by China Starwin Science & Technology Co., Ltd., will void
equipment warranty and any repair thereafter shall be liable to a charge. It may also void
the user's authority to operate the equipment.
Some of the equipment provided by China Starwin and specified in this manual, is manufactured

6
www.starwincom.com
Tel: [phone], E-mail: [e-mail]
and warranted by third parties. All such equipment must be installed and handled in full
compliance with the instructions provided by such manufacturers as attached to this manual or
provided thereafter by China Starwin or the manufacturers. Non compliance with such
instructions may result in serious damage and/or bodily harm and/or void the user's authority to
operate the equipment and/or revoke the warranty provided by such manufacturer.
Instructions
The satellite terminal is a full satellite earth station system for communication in Ku-band. The
satellite parameters shall be selected only according to the specific user conditions required.
The China Starwin satellite terminal User Manual provides operational instructions, for the
device, which are standard for applications in Ku-band. However, the specific modem and
antenna electrical performance parameters need to be taken in account. This manual is intended
for technicians responsible for the installing, setting up and operating of the satellite terminal and
for system administrators who are responsible for managing the system.
Safety Alert Messages

7
www.starwincom.com
Tel: [phone], E-mail: [e-mail]
Safety alert messages call attention to potential safety hazards and tell you how to avoid them. These
messages are identified by the signal words DANGER, WARNING, or NOTICE, as illustrated below. To
avoid possible property damage, personal injury, or in some cases possible death, read and comply with
all safety alert messages.
DANGER: Indicates a potentially hazardous situation which, if not avoided, will result in death or serious
injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in minor or
moderate injury.
NOTICE: It is used for advisory messages concerning possible property damage, product damage or
malfunction, data loss, or other unwanted results – but not personal injury.
Indicates a safety message that concerns a potentially hazardous situation in which you could fall.
Indicates a safety message that concerns a potential electric shock hazard.

8
www.starwincom.com
Tel: [phone], E-mail: [e-mail]
Content
1 INTRODUCING THE USAT FLAT-PANEL FL30P-E/FL30P-M TERMINAL.................................................... 1
2 TECHNICAL SPECIFICATION ............................................................................................................................ 3
3PACKING LIST................................................................................................................................................. 5
3.1 UNPACKING AND INSPECTION........................................................................................................................................... 5
3.2 FREIGHT DAMAGE..........................................................................................................................................................5
3.3 MATERIAL-MISSING OR DAMAGED.................................................................................................................................... 5
3.4 BASIC EXTERNAL CONFIGURATION OF USAT TERMINAL ..........................................................................................................6
4DESCRIPTION OF USAT TERMINAL ........................................................................................................... 8
4.1 TERMINAL STRUCTURE DIAGRAM...............................................................................................................................8
4.1.1 Automatic Satellite Communication Terminal (FL30P-E)............................................................................. 8
4.1.2 Manual Satellite Communication Terminal (FL30P-M)................................................................................ 8
4.2 TERMINAL DIMENSIONS ...........................................................................................................................................9
4.2.1 Automatic Satellite Communication Terminal (FL30P-E)................................................................................. 9
4.2.2 Manual Satellite Communication Terminal (FL30P-M).................................................................................... 9
4.3 TERMINAL WIRELESS ACCESS DETAILS.............................................................................................................................. 10
4.4 MATTERS NEEDING ATTENTION...................................................................................................................................... 10
5TERMINAL INSTALLATION, INITIALIZATION AND ALIGNMENT............................................................11
5.1 TERMINAL INSTALLATION AND INITIALIZATION .............................................................................................................11
5.1.1 Automatic Satellite Communication Terminal (FL30P-E)............................................................................... 11
5.1.2 Manual Satellite Communication Terminal (FL30P-M).................................................................................. 16
5.2 TERMINAL ALIGNMENT ..........................................................................................................................................22
5.2.1 Automatic Satellite Communication Terminal (FL30P-E)............................................................................... 22
5.2.2 Manual Satellite Communication Terminal (FL30P-M).................................................................................. 26
5.2.3 Terminal Alignment Other Function introduction............................................................................................ 31
6MODEM STATUS INDICATION .....................................................................................................................34
7APPLICATION (‘APP’) FOR TERMINAL CONTROL ..................................................................................40
8TERMINAL STOWING....................................................................................................................................47
8.1 Automatic Satellite Communication Terminal (FL30P-E).................................................................................. 47
8.2 Manual Satellite Communication Terminal (FL30P-M)..................................................................................... 49
9TROUBLESHOOTING AND MAINTENANCE .............................................................................................55
9.1 TROUBLESHOOTING......................................................................................................................................................55
9.2 MAINTENANCE............................................................................................................................................................55
10 TECHNICAL SERVICE CONTACT INFORMATION ................................................................................56
APPENDIX 1 OTHER INSTRUCTIONS................................................................................................................57
11 PRODUCTION SPEC......................................................................................................................................60

1
www.starwincom.com
Tel: [phone], E-mail: [e-mail]
1 Introducing The uSat Flat-Panel FL30P-E/FL30P-M Terminal
FL30P-E/FL30P-M series integrated satellite communication terminal has completely changed the form
of the standard parabolic antenna that have been used for satellite communication for a long time, and is
the real next generation of satellite communication terminal. FL30P-E/FL30P-M integrated satellite
broadband portable terminal adopts advanced high gain horn waveguide array antenna and integrates
necessary components of satellite communication: Antenna system, RF unit, Servo system, Satellite
modem, Wireless router and Power supply system, which makes FL30P-E/FL30P-M completely
separated from the traditional Parabolic form, with a simpler appearance and structure, and more
convenient for transportation and operation which completely solves the problem that the traditional
satellite portable station system is not portable.
The operation interface design of FL30P-E/FL30P-M integrated satellite broadband portable terminal is
based on the simple and intuitive user experience. The terminal does not need any assembly, and it is
simple, convenient and compact for the satellite pointing. Even the personnel without the professional
background of satellite communication or the experience of using the satellite portable station can
complete all operations only by checking the operation instructions or simple training.
The traditional parabolic antenna form of the split, semi-finished satellite portable station needs more
than one person to cooperate in transportation, temporary assembly, which is easy to cause damage to
the components. The integrated design of FL30P-E/FL30P-M integrated satellite broadband portable
terminal reduces the failure point to the greatest extent, and has high reliability, which can be transported
and used by one person.
FL30P-E/FL30P-M integrated broadband portable terminal can provide high-speed data channels for
video, voice and data. It is applicable to the emergency communication scenes of the army, public
security, fire protection and government emergency agencies, and widely used in the fields of
earthquake relief, emergency repair of grid lines, flood control and drought relief, news gathering, etc.
When the terrestrial network communication blind area and the temporary need to establish a special
communication network, the network channel can be quickly opened to provide a reliable transmission
link for various services.

2
www.starwincom.com
Tel: [phone], E-mail: [e-mail]
Figure 1-1 FL30P-E
Figure 1-2 FL30P-M

3
www.starwincom.com
Tel: [phone], E-mail: [e-mail]
2 Technical Specification
Antenna
Model No.
FL30P-E/ FL30P-M
Antenna Type
Horn waveguide array antenna
Equivalent to parabolic antenna size
0.3m
RF Performance
Frequency Range
Tx
13.75~14.50 GHz
Rx
10.70~12.75 GHz
Polarization
Linear Horizontal / Vertical
Rx Gain
31.2dBi(in range of ±10 degree)
3.11dBi(out range of ±10 degree)
Tx Gain
33.11dBi(in range of ±10 degree)
3.11dBi(out range of ±10 degree)
G/T
10dB/K, 25° Elevation
EIRP
44 dBW (16W BUC)
First Sidelobe
≤ -14dB
Power And RF Performance
DC Power Supply
DC24V ±5% (With AC Adapter)
With two external detachable batteries, the maximum
capacity can reach 187.2Wh
Typical Satellite Modem
Select small-size Modems according to customer
requirements, such as IQ200, UHP210/220, etc.
Typical BUC
16W
Power Consumption
16W BUC
150W
Mechanical Performance
Satellite Acquisition
Manually pointing to satellite, level error<0.2°
Azimuth Range
Unlimited, fine adjustment ±5°
Elevation Range
10°~ 90°continues, fine adjustment ±5°
Polarization
±70°
Terminal Dimensions
(Stowing)
FL30P-E
L 15.2 × W 13.8 × H 8.0 in.
L 385× W 350× H 203 mm
FL30P-M
L 15.2 × W 13.6 × H 3.1 in.
L 385× W 345× H 80 mm
Terminal Weight
FL30P-E
13 kg ，28.7lbs.
FL30P-M
6 kg ，13.2 lbs.
Environmental Performance
Operational Wind
17m/s (61.2km/h)
Operational Temperature
-25°C to +50°C
Ingress Protection
IP66
Humidity
0 ~ 95%

4
www.starwincom.com
Tel: [phone], E-mail: [e-mail]
Interfaces
Power
DC Power waterproof aviation connector
LAN
1 RJ45 10/100/1000
Other Function
Wireless Router
IEEE 802.11b/g/n at 2.4GHz
Access number: 30
Coverage (Unobstructed):50~100m
Bluetooth Device
V4.2
GNSS Device Supports
GPS/BeiDou-2
Table 2-1 FL30P-E/FL30P-M Technical Specification

5
www.starwincom.com
Tel: [phone], E-mail: [e-mail]
3 Packing List
(1) External Packing of Terminal As Follows:
❖FL30P-E/FL30P-M Terminal
❖24V DC Power, include safety adapter (The safety adapter is configured according to the user's
product usage location)
❖Network Cable, and Upgrade Cable (Optional)
❖Other customized accessories
❖User Manual
❖Warranty Card
(2) Internal Packing of Terminal As Follows:
❖Waveguide array antenna (Equivalent aperture 0.30 m, including LNB and BUC modules)
❖Modem module (When the Modem is built in)
❖GPS module
❖Display module
❖ACU module
❖Power module
❖Battery module
The basic configuration can be designed according to user requirements.
3.1 Unpacking and Inspection
When you receive the system containers, unpack and inspect the components and hardware to ensure
that all parts have been received in good condition.
3.2 Freight Damage
If any parts appear to have been damaged in transit, immediately contact the freight carrier.
3.3 Material-Missing or Damaged
If any parts appear to be missing or damaged, but not as a result of handling in transit, contact your
dealer or distributor.

6
www.starwincom.com
Tel: [phone], E-mail: [e-mail]
3.4 Basic External Configuration of uSat Terminal
Item
Photo
Part Name
Quantity
Remarks
01
uSat Ku-band Portable Flat
Terminal
1
Standard
02
Network Cable – 5m
1
Standard
03
Power Cable -5m
1
Standard
04
Power Adapter
1
Standard
05
Backpack
1
Standard
epp packing box
1
Standard

7
www.starwincom.com
Tel: [phone], E-mail: [e-mail]
06
Carton
1
Standard

8
www.starwincom.com
Tel: [phone], E-mail: [e-mail]
4 Description of uSat Terminal
4.1Terminal Structure Diagram
4.1.1 Automatic Satellite Communication Terminal (FL30P-E)
Figure 4-1-1 Component Description
1- Ventilation valve, 2-On/Off Button1, 3-Power In, 4-Base Frame, 5-Antenna, 6-OLED Display,
7-POWER ON/OFF Button2, 8-Lock, 9- Drive mechanism, 10- Rear Support Leg Components,
4.1.2 Manual Satellite Communication Terminal (FL30P-M)
Figure 4-1-2 Component Description
1-Rear Support Leg Components, 2-Dust Cover, 3-Compass, 4-Base Frame, 5- Polarization Scale,
6-Antenna, 7-OLED Display, 8-POWER ON/OFF Button, 9-Lock, 10- Elevation Roughly Adjustment
Button, 11-Front Support Leg Components, 12-Elevation Fine-Tune Adjustment Knob, 13- Azimuth
Fine-Tune Adjustment Knob

9
www.starwincom.com
Tel: [phone], E-mail: [e-mail]
4.2Terminal Dimensions
4.2.1 Automatic Satellite Communication Terminal (FL30P-E)
The dimension drawing of the uSat Flat Terminal (Unit: mm), as shown in Figure 4-2-1.
Figure 4-2-1-1 Overall Dimension
4.2.2 Manual Satellite Communication Terminal (FL30P-M)
The dimension drawing of the uSat Flat Terminal (Unit: mm), as shown in Figure 4-2-1.
Figure 4-2-1 Overall Dimension

10
www.starwincom.com
Tel: [phone], E-mail: [e-mail]
4.3 Terminal Wireless Access Details
❖Terminal Serial No (S/N):
PMXXXXXXXXX (XXXX is the number of the following device)
❖MODEM:IQ200 (Take the IQ200 as example)
IP:192.168.0.1
User: admin
Password: iDirect
❖Wi-Fi Router:
SSID: HILINK-XXX
Default IP Address: 192.168.16.254
User Name: admin Password: admin
❖Bluetooth:
Device Name: uSATXXXX
4.4 Matters Needing Attention
1. The uSat terminal is a valuable instrument - treat it with care.
2. Dry out the uSat terminal, before stowing, after using it in rain or snow.
3. Store the uSat terminal in a dry environment.

11
www.starwincom.com
Tel: [phone], E-mail: [e-mail]
5 Terminal Installation, Initialization and Alignment
5.1Terminal Installation and Initialization
5.1.1 Automatic Satellite Communication Terminal (FL30P-E)
1. Take the Terminal out of the backpack and open four support legs, as shown in Figure 5-1-1-1.
Figure 5-1-1-1 Open the Support Leg
2. Place the Terminal safely on the ground in a horizontal position, as shown in Figure 5-1-1-2.
Figure 5-1-1-2 Place the Terminal on Horizontal
3. Take the power cable and connect it to the Terminal’s power socket (POWER), as shown in Figure
5-1-1-3.
Figure 5-1-1-3 Power On
ON/OFF
Button
Power
IN

12
www.starwincom.com
Tel: [phone], E-mail: [e-mail]
4. Connect the Power cable to the Power Source. Upon connection, the display will show the power
logo, as shown in Figure 5-1-1-4.
Figure 5-1-1-4 LOGO
DANGER
(1) The power supply requirement is 85-264VAC 50 / 60Hz
(2) If you work on a roof, tower or other high structure or use a ladder or scaffold to access the
work site, follow these precautions to prevent personal injury or death:
❖Walk only on sound roof structures.
❖Ensure that the antenna assembly and installation surface are structurally sound so that
they can support all loads (equipment weight, ice, and wind).
❖Use safety equipment (for example, a lifeline) appropriate for the work location.
❖Follow all manufacturer safety precautions for all safety and other equipment used.
❖Perform as many procedures as possible on the ground.
(3) Do not work in high wind or rain; or if a storm, lightning, or other adverse weather conditions
are either present or approaching.
(4) Do not connect the other side of the power cable to the power source until the terminal
installation completion.
5. Deploy the Terminal, move the locking tab downward firstly, and the button will automatically move
downward, then the Terminal is deployed. As shown in Figure 5-1-1-5 and Figure 5-1-1-6.
Figure 5-1-1-5 Deploy the Terminal