Stealth PINNACLE SC-18WPL-HP230 User manual

SC-09WPL-HP230
SC-12WPL-HP230
SC-18WPL-HP230
SC-24WPL-HP230
INDOOR UNIT FRONT PANE DISP AY: ook here for ED display of system
status, setpoint and indoor temperatures and malfunction codes.
1. ON/OFF Button
Press to power the unit on or off.
2. FAN Button
Press to select fan speed (Ultra- ow, ow, ow-Medium,
Medium, Medium-High, High or Turbo).
3. MODE Button
4. +/- Buttons
Press to either raise or lower settings including
temperature and time.
5. TURBO Button
Press to boost cooling or heating airflow.
Quickest way to reach preset temperature.
6. Button
Press to control horizontal angle of louvers and to
redirect airflow.
7. Button
Press to control vertical angle of louvers and to
redirect airflow.
8. C OCK Button
Press to display time of day or time remaining on timer.
9. TIMER ON/TIMER OFF Buttons
Press to start or stop the timer. (Adjust with “+” and
“–” buttons.) See Owner's Manual for more details.
10. TEMP Button
Press to select temperature setting.
11. I FEE Button
Press to activate; allows unit to sense temperature at
the remote controller in Cool mode.
12. IGHT Button
Press to turn on lights on the unit’s Front Panel Display.
Press again to turn off.
13. X-FAN Button
Automatically runs fan after unit is turned off to remove
moisture from coil.
14. QUIET Button
Press to activate in Heat or Cool mode; after the room
reaches its set temperature, the system operates
discreetly at ow fan speed.
15. S EEP Button
Press to select one of three S EEP modes, each offering
varying levels of comfort control while sleeping.
See Owner's Manual for more details.
(Before opening cover) (After opening cover)
1
3
4
2
1
3
7
9
12
14
5
2
4
8
10 11
15
13
6
WALL MOUNT DUCTLESS
AIR CONDITIONING
AND HEATING SYSTEM
NOTE: lease read the complete Owner’s
Manual carefully before operation.
QUICK-START GUIDE
: HEAT
: COOL
: DRY
:
AUTO
: FAN ONLY

KEY FEATURES & FUNCTIONS
SMART HONE CONTROL
Built-in intelligent WIFI capability and Smart Control function allows you to operate the unit with standard Android or iOS
smartphones. See Owner’s Manual for more details.
MULTI FAN S EEDS
Whether operating in either Cool or Heat mode, the indoor fan can be set to your choice of seven different speeds (Ultra- ow, ow,
ow-Medium, Medium, Medium-High, High or Turbo) to achieve maximum comfort.
DRY MODE
During warm humid conditions, selecting this mode will increase moisture removal in your room for added indoor comfort. Fan speed
cannot be adjusted in Dry Mode.
X-FAN MODE
In humid areas, this Dry Coil function allows indoor fan to run for a pre-determined time after unit is turned off (in Cool or Dry modes) to
ensure that additional moisture is removed from coil.
OWER FAILURE FUNCTION
Your settings and parameters are stored in non-volatile memory and are retained during a power failure.
I FEEL MODE
This function senses the temperature at the remote controller instead of at the indoor unit in Cool mode. It then adjusts airflow and
temperature accordingly for the ultimate in personal comfort control and energy savings.
SLEE MODE
Choose one of three selectable sleep cycles to automatically adjust room temperatures during your sleep time to maximize comfort and
reduce utility bills.
INTELLIGENT RE-HEATING
In Heat mode, the system delays fan activation until the coil has warmed up to prevent blowing uncomfortable cool air into the room.
SELF-DIAGNOSIS
The built-in computer uses real-time diagnostics to continuously scan for errors or malfunctions. Fault codes are shown on the unit display
to facilitate troubleshooting.
FAQs
Why does the fan continue to run even when the unit is not cooling or heating?
To maintain consistent temperatures and minimize energy-loss from constant starts and stops, the fan keeps air flowing past the
thermostat.
What temperature is displayed on the remote controller?
The remote always displays your desired indoor temperature. (You may view current indoor temperature, as well as desired
temperature, on the indoor unit’s Front Panel Display.)
What happens if the remote is lost or damaged?
Use the Aux button to manually operate the unit. ift up the front panel section on the indoor unit and locate the button on the right-hand
side. Press the button to turn the unit ON or OFF. (Not all functions will be available.) Press again to cancel Aux Mode and transfer
control back to the remote controller.