STEINEL XLED PRO ONE S User manual

STEINEL Vertrieb GmbH
Dieselstraße 80-84
33442 Herzebrock-Clarholz
Tel: [phone]
www.steinel.de
Contact
www.steinel.de/contact
RU
CN
BG
LV
LT
EE
HR
SI
RO
PL
SK
CZ
HU
TR
GR
NO
FI
DK
SE
PT
ES
IT
NL
FR
GB
DE
I
STL-11104-20_BDAL_L 585 S_148x210mm 2.indd 1 15.04.20 07:37
XLED PRO ONE S
XLED PRO ONE Plus S
XLED PRO ONE Max S
XLED PRO ONE
XLED PRO ONE Plus
XLED PRO ONE Max
STEINEL Vertrieb GmbH
Dieselstraße 80-84
33442 Herzebrock-Clarholz
Tel: [phone]
www.steinel.de
Contact
www.steinel.de/contact
RU
CN
BG
LV
LT
EE
HR
SI
RO
PL
SK
CZ
HU
TR
GR
NO
FI
DK
SE
PT
ES
IT
NL
FR
GB
DE
I
STL-11104-20_BDAL_L 585 S_148x210mm 2.indd 1 15.04.20 07:37
XLED PRO ONE S
XLED PRO ONE Plus S
XLED PRO ONE Max S
XLED PRO ONE
XLED PRO ONE Plus
XLED PRO ONE Max
GB

1. About this document 3
2. General safety precautions 3
3. System description 4
4. Electrical connection 12
5. Installation 14
6. Function 24
7. Remote control accessory 29
8. Cleaning and maintenance 32
9. Disposal 33
10. Manufacturer's warranty 34
11. Technical specifications 35
12. Troubleshooting 37
Index

– 3 – Index
1. About this document
– Under copyright. Reproduction either in whole or in part
only with our consent.
– Subject to change in the interest of technical progress.
!
Hazard warning!
Warning of hazards from electricity!
Warning of hazards from water!
2. General safety precautions
!Failure to observe these operating instructions
presents hazards!
These instructions contain important information on the
safe use of this product. Particular attention is drawn to
potential hazards. Failure to observe this information may
lead to death or serious injuries.
• Read instructions carefully.
• Follow safety advice.
• Keep instructions within easy reach.
– Working with electrical current may produce hazardous
situations. Touching live parts can result in electrical
shock, burns or death.
– Work on mains voltage must only be performed by
qualified, skilled personnel.
– National wiring regulations and electrical operating
conditions must be observed (e.g. DE: VDE0100,
AT:ÖVE-ÖNORM E8001-1, CH:SEV1000).
– Only use genuine replacement parts.
– Repairs must only be carried out by companies qualified
to do so.

– 4 – Index
3. System description
Proper use
XLED PRO ONE S/Plus S/Max S
– LED floodlight with infrared motion sensor.
– For indoor and outdoor wall mounting
– Not suitable for connecting to a dimmer.
Operating principle
– The integrated infrared sensor detects the heat radiated
from moving objects (e.g. people, animals). The heat
detected in this way is converted electronically into a
signal that switches the LED floodlight ON automatically.
– The most reliable way of detecting motion is to install
the unit with the sensor aimed across the direction in
which a person would walk.
– Motion detection reach is restricted when the unit is
approached head on.
– Obstacles (such as trees, walls or panes of glass) may
restrict or prevent the detection of movement.
– Sudden fluctuations in temperature as a result of
changes in weather are not distinguished from sources
of heat.
Proper use
XLED PRO ONE/Plus/Max
– LED floodlight.
– For indoor and outdoor wall mounting
– Not suitable for connecting to a dimmer.

– 5 – Index
Package contents
– XLED PRO ONE S
– XLED PRO ONE Plus S
– XLED PRO ONE Max S
3.1
I
A
I
B
1×
1×
2× 1×
1× 2×
1×
1×
2× 2×
– 1 LED floodlight with infrared motion sensor
– 1 Allen key
– 1 shroud
– 2 screws
– 2 wall plugs
– 2 washers
– 2 grub screws
– 1 remote control RC 12
– 1 safety data sheet
– 1 quick-start guide

– 6 – Index
Package contents
– XLED PRO ONE
– XLED PRO ONE Plus
– XLED PRO ONE Max
3.2
I
A
I
B
1×
1× 2× 1× 2×
1×
2×
2×
– 1 LED floodlight
– 1 Allen key
– 2 grub screws
– 2 screws
– 2 wall plugs
– 2 washers
– 1 safety data sheet
– 1 quick-start guide

– 7 – Index
XLED PRO ONE S product dimensions
– XLED PRO ONE S (a)
– XLED PRO ONE Plus S (b)
– XLED PRO ONE Max S (c)
3.3
229mm (a)
259mm (b),(c)
230mm (a) 250mm (b),(c)
182mm (a)
202mm (b),(c)

– 8 – Index
XLED PRO ONE product dimensions
– XLED PRO ONE (a)
– XLED PRO ONE Plus (b)
– XLED PRO ONE Max (c)
3.4
229mm (a)
259mm (b),(c)
206mm (a) 226mm (b),(c)
182mm (a)
202mm (b),(c)

– 9 – Index
XLED PRO ONE S/Plus S/Max S product components
3.5
30
min
10
min
OFF
A
B
E
F
C
D
G
A LED floodlight head
B Mounting bracket
C Control dial
D Connecting terminal
E Terminal cover
F Sensor unit
G Cover

– 10 – Index
3.6
30
min
10
min
OFF
H
I
J
H Time setting
I Twilight setting
J Basic light level
3.7
K
K Remote control RC 12

– 11 – Index
XLED PRO ONE/Plus/Max product components
3.8
A
B
D
C
E
A LED floodlight head
B Mounting bracket
C Connecting terminal
D Terminal cover
E Cover

– 12 – Index
4. Electrical connection
XLED PRO ONE S/Plus S/Max S wiring diagrams
4.1
L
LL
N
PE
NL`
I
O
L
LL
N
PE
NL` L N L`
L
LL
N
PE
NL` L N

– 13 – Index
XLED PRO ONE/Plus/Max wiring diagrams
4.2
LL
N
PE
NL
I
O
LL
N
PE
NL NL
The mains power supply lead is a 3-core cable:
L= phase conductor (usually black, brown or grey)
N= neutral conductor (usually blue)
PE = protective-earth conductor (green/yellow)
The floodlight can also be connected to the power supply
downstream of a mains switch if it is ensured that the
mains switch is left ON all the time.
The LEDs in this floodlight cannot be replaced. In the event
of LED failure, the entire product must be replaced.

– 14 – Index
5. Installation
Hazard from electrical power.
Touching live parts can result in electrical shock, burns or
death.
• Switch OFF power and interrupt power supply.
• Using a voltage tester, check to make sure that the
power supply is disconnected.
• Make sure power supply remains interrupted.
Risk of damage to property!
Mixing up connection leads may produce a short circuit.
• Identify connection leads.
• Connect the leads correctly.
Preparing for installation
• Check all components for damage. Do not use the
floodlight if it is damaged.
• Select an appropriate site to install the product.
–Take reach into consideration.
–Take reach and motion detection into consideration.
–Vibration-free.
–No obstacles in detection zone.
–Not in explosive atmospheres.
–Not on normally flammable surfaces.
–Do not look into the light source from a short
distance (<30cm).
–Spaced at a distance of at least 50cm from other
LED floodlights.

– 15 – Index
XLED PRO ONE S/Plus S/Max S reach
5.1
≤10m
2m

– 16 – Index
Detecting motion across the direction in which a
person walks.
XLED PRO ONE S/Plus S/Max S
5.2
≤10m
Detecting motion in the direction in which a person
walks.
XLED PRO ONE S/Plus S/Max S
5.3
~4m

– 17 – Index
Aiming the floodlight
5.4
• Correctly aim floodlight.

– 18 – Index
Mounting procedure
5.5
I
O
• Check to make sure the power supply is switched OFF.
• Mark drill holes.
5.6
Ø6mm
• Drill holes (ø 6 mm) and fit wall plugs.

– 19 – Index
5.7
• Unscrew cover.
5.8
30
min
10
min
OFF
• Open cover.

– 20 – Index
5.9
30
min
10
min
OFF
• Pull cable through opening.
5.10
• Screw bracket to mounting surface.