STERNO HOME GL42590 User manual

READ, FOLLOW AND SAVE THESE INSTRUCTIONS
Indoor - USB Rechargeable
200 LED Copper Wire Fairy Light
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS
IMPORTANT SAFETY INSTRUCTIONS
WARNING - To reduce the risk of FIRE OR INJURY TO PERSONS:
Risk of electric shock. Install 10 feet (3.05 m) or more from a pool, spa or fountain.
• Install in accordance with all local codes and ordinances.
For indoor use ONLY. Only for use with the provided power unit.
MODEL #GL42590
5021-GL42590-BIL_112119
1. Assembly of the fairy light
1.1 Carefully remove the fairy light from its protective packaging.
1.2 Shape into the area you want.
1.3 Plug into USB Power adaptor (included) - 2 Prong USB power
adaptor 110-240V and 5V/1.5A. (Fig. 1)
USB can be installed on different power sources:
• Plug
• Computers
• Power Packs
NOTE: Power plug is NOT weatherproof.
2. How to connect the USB power plug to the power source
Transformer must be mounted at least 1 foot (0.3m) above ground level.
2.1 Connect the copper wire to the power plug.
2.2 Plug the power pack into the outlet (Fig. 2).
10cm
10cm
10cm
10cm
Fig. 2
Fig. 1
3. How it works
• Press button to turn ON or OFF.

Warning: Risk of fire and shock
WARNING - To reduce the risk of FIRE OR INJURY TO PERSONS:
Risk of electric shock. Install 3.05 m (10 feet) or more from a pool, spa or fountain.
•Install in accordance with all local codes and ordinances. Only for use with the provided power unit.
• Never use with an extension cord unless plug can be fully inserted. Do not alter the plug.
•Do not cover this product as the covering may cause the fairy light to overheat and melt or ignite.
•Do not use if there is any damage to the light or cord insulation. Inspect periodically.
• Do not puncture, cut, shorten, or splice the fairy light.
•Do not route the cord or fairy light cable through walls, doors, windows or any like part of the building structure.
•Do not submerge fairy light in liquids.
•Do not secure this product or its cord with staples, nails, or like means that may damage the insulation.
•Do not install on gates or doors, where subject to flexing.
•Do not install in cabinets, tanks or enclosures of any kind.
FOR INDOOR USE ONLY.
CUSTOMER SERVICE
[email protected]