Laserworld LED-36MH User manual

LED-36MH
USER MANUAL
Please read this manual carefully before use!

USER MANUAL: Laserworld LED Moving Head LED
-
36MH
Page 2 of 1
I
Table of contents
Page
. PRODUCT (GENERAL)
1.1 PRODUCT INTRODUCTION
1.2 PRODUCT FEATURES
1.3 TECHNICAL SPECIFICATIONS
1.4 PHOTOMETRIC DATA
1.5 SAFETY WARNING
2. INSTALLATION
2.1 MOUNTING
2.2 SETTING UP (STAND ALONE)
2.3 SETTING UP (MASTER/SLAVE)
2.4 SETTING UP (DMX512 CONTROLLER)
3. DISPLAY PANEL OPERATION
3.1 BASIC
3.2 MENU
3.3 SETTING DMX512 ADRESS
3.4 RUN MODE
3.5 EDIT PROGRAM
3.6 SPECIAL OPTIONS
4. OPERATION WITH DMX5 2
4.1 BASIC ADDRESSING
4.2 CHANNEL ASSIGNMENT
4.3 FUNCTION EXPLANATION
4
4
5
6
6
8
8
9
10
10
11
11
12
13
14
14-15
15
Date: 01/2008

USER MANUAL: Laserworld LED Moving Head LED
-
36MH
Page 3 of 1
Checking Parts
Please check if the following parts are included:
1 x LED-36MH
1 x Power cable
1 x User manual
SAFETY INSTRUCTIONS
-
-
If the device has been exposed to drastic temperature fluctuation, do not
switch it on immediately. The arising condensation water might damage your device.
Leave the device switched off until it has reached room temperature.
Never leave this device running unattended and keep it away from children
and unauthorized persons.
1. Keep away from heaters and other heating sources. In order to safeguard
sufficient ventilation, leave 50 cm of free space around the device.
2. Always disconnect from the mains when the device is not in use or before
cleaning it.
OPERATING DETERMINATIONS
1. Make sure that the used voltage is : AC 220V~240V or AC 110V-120V,
50/60Hz
2. If the device is used in a flying installation, the mounting brackets and an
appropriate safety-rope must be fixed.
3. Please consider that unauthorized modifications on the device are forbidden
due to safety reasons!
4. If this device will be operated in any way differently than described in this
manual, the product may suffer damages and the guarantee becomes void.
Furthermore, any other operation may lead to dangers like short-circuit,
burns, electric shock, etc.
Date: 01
/
2008

USER MANUAL: Laserworld LED Moving Head LED
-
36MH
Page 4
of 1
Date: 01/2008

USER MANUAL: Laserworld LED Moving Head LED
-
36MH
Page 5 of 1
Date: 01/2008

USER MANUAL: Laserworld LED Moving Head LED
-
36MH
Page 6 of 1
Date: 01/2008

USER MANUAL: Laserworld LED Moving Head LED
-
36MH
Page of 1
Date: 01/2008

USER MANUAL: Laserworld LED Moving Head LED
-
36MH
Page 8 of 1
Date: 01/2008

USER MANUAL: Laserworld LED Moving Head LED
-
36MH
Page 9 of 1
Date: 01/2008

USER MANUAL: Laserworld LED Moving Head LED
-
36MH
Page 10 of 1
Date: 01/2008

USER MANUAL: Laserworld LED Moving Head LED
-
36MH
Page 11 of 1
Date: 01/2008

USER MANUAL: Laserworld LED Moving Head LED
-
36MH
Page 12 of 1
Date: 01/2008

USER MANUAL: Laserworld LED Moving Head LED
-
36MH
Page 13 of 1
Date: 01/2008

USER MANUAL: Laserworld LED Moving Head LED
-
36MH
Page 14 of 1
Date: 01/2008

USER MANUAL: Laserworld LED Moving Head LED
-
36MH
Page 15 of 1
Date: 01/2008

USER MANUAL: Laserworld LED Moving Head LED
-
36MH
Page 16 of 1
TECHNICAL SPECIFICATIONS
Power supply: AC 100V-120V or AC 220V-240V, both at 50/60 Hz DMX 5 2:
10
channels
Condition temperature: -10°C ~ +35°C
X/Y axes beam scanning optical angle:
0 ~ ±15°
Power consumption: 0W
Working mode: auto programmes, music mode, Master/Slave, DMX512
Output
/ LED: 1W, total: 36W
LED / Unit: 36pcs. (12x red; 12x blue; 12x green)
Weight: 8.9 kg
Dimensions: 356 x 300 x 356 mm (L x W x H)
PLEASE NOTE
This device has left our premises in absolutely perfect condition. In order to maintain
this condition and to ensure a safe operation, it is absolutely necessary for the user
to follow the safety instructions and warning notes written in this user manual.
Laserworld cannot be made liable for damages caused by incorrect installations and
unskilled operation!
Date: 01/2008

USER
MANUAL: Laserworld LED Moving Head LED
-
36MH
Page 1 of 1
EU
-
Declaration of Conformity
We hereby confirm that the following device
Laserworld LED MOVING HEAD LED-36MH
complies with the essential safety requirements, laid down in the regulations of the
committee to assimilate the provisions of law of all participating EU states on the
electromagnetic compatibility (89/446/EWG).
The device has been classified consideri
ng the following EU-norms on
electromagnetic compatibility:
DIN EN 55103-1: 1996
DIN EN 55103-2: 1996
DIN EN 61000-3-2:2000 + A2: 2005
DIN EN 61000-3-3:1995 + A1: 2001
Assessment of compliance of the product with the requirements relating to the Low Voltage
Directive (LVD) was based on the following standards:
DIN EN 60065 : 2002
Furthermore, the device is verified in correspondence to the laser class
regulations DIN EN 60825-1, if properly set up according to the upper
mentioned laser safety regulation.
After installing the device, an inspection and official approval is indispensable for the overall
setup. The inspection must follow the European guidelines EN 60825-1 and corresponding
regulations for the prevention of accidents BGV-B2. This declaration is executed on behalf of
the LED-36MH manufacturer
Date: 01/2008
Laserworld (Switzerland) AG
c/o LOG.ON GmbH
Raiffeisenstrasse 8
78658 Zimmern ob Rottweil
GERMANY
VAT number: DE252331844
WEEE-Reg.-Nr.: DE 93014361
Laserworld (Switzerland) AG
based in:
Rheinblick Residenz
Oberstrasse 1
8274 Tägerwilen
SWITZERLAND
Authorized person:
Supervisory board Ms Rhea Gössel
place of business: 8274 Tägerwilen / Schweiz
company number: CH-440.3.020.548-6
Commercial Registry Kanton Thurgau
www.laserworld.com
[email protected]