STILLA Hampton User manual

HAMPTON [1x86] V2—Jan 2023
HAMPTON [16x8]
USER MANUAL
IMPORTANT
Read carefully. Retain for future refence

2 HAMPTON [1x86] V2—Jan 2023
SAFETY & CARE GUIDELINES
1. Take care when moving and working with the painted panels, use the supplied packaging to avoid damage to painted
surfaces.
2. When arranging the shed components for inial check, do not store the panels laid down, stand up where possible.
3. Ensure you fully understand the use of power tools recommended for use in assembling this shed.
4. Eye protecon should be worn when necessary, when operang power tools.
5. Suitable Gloves will protect Hands, take care when handling Roof Sheeng and other Metal components
6. Use appropriate sun protecon when working outdoors.
7. Secure the shed to a suitable immovable foundaon. [We recommend: Concrete Slab or Wooden Heavy Floor]
8. Team liing of heavy items is recommended to avoid injury.
9. Touch up paint is provided in the installaon kit to address minor marks / blemishes to painted surfaces.
10. Do not stand or walk on the roof.
11. Do not lay down panels without protecng the paint
1. UNPACK & CONFIRM
Read the safety & care and guidelines. Every part needed to construct your shed is included inside the pack; Frames; panels;
doors; windows; hardware kits & roofing. Please fully unpack all the parts & check against the parts checklist before con-
tacng customer service about anything you believe may be missing or damaged. Thank-you!
Protect Painted surfaces when laid down for processing.

3 HAMPTON [1x86] V2—Jan 2023
TOOLS REQUIRED
Light coloured crayon/chinagraph pencil white/yellow.
Phillips Bit (PH2), Baen Screw Bit, Phillips Bit #2, 5/16” Hex driver, Drill Bits 3mm & 4mm, Countersink Bit (or Combina-
on.)
This product requires a minimum of 2 persons to assemble.
For external access during assembly,
ensure there is adequate space around
the perimeter of the shed assembly
space.
Assemble in order presented in this manual. Do not skip any processes.
or
Preparing your site
The installaon locaon needs to be flat, level and solid. Pavers or a solid material that will not be
affected by weather can be used to perfectly level the shed by placing under the floor frame where
required, make sure all members are supported. If the locaon is sloped we recommend making level
with a slab or Timber floor.
If you are installing your shed on a Slla floor, this can be placed on unlevelled surfaces and levelled
up by using the 100x100 stumps provided. A separate detail is provided for Floor Installaon.

4 HAMPTON [1x86] V2—Jan 2023
SHED COMPONENTS
Carefully unpack all the items from shipping carton. Layout in a clean and safe area. Please check you have all compo-
nents and they have no defects before proceeding.
WALL — BOTTOM PLATE
[2] [10] [56]
FS295T2, Frame Sill,70mm x 45mm x 295mm Tenon
both Ends.
FS1130T2, Frame Sill,70mm x 45mm x 1130mm Tenon
both Ends
FB20MO/SM Sch Screw #6 x
20mm, Flat Buon Head, Panel Fixing to
Sill
WALL — UPRIGHTS
[4] [2]
CP1926 Pine,70mm x 70mm x 1926mm, Corner Post, Plain Ends DG1130 Pine,70mm x 45mm x 1130mm, Double Groove, Plain End
[2]
DG1217A1 Pine, 70mm x 45mm x 1217mm, Double Groove, Apex Angle top.
[2]
SG1926A1 Pine 70 x 45 x 1926mm, Single Groove. Miter Top
[5]
DG1926 Pine 70x45x1926mm, Double Groove Plain ends
[350]
PS32CSK, Phillips Screw #6 x 32mm, Countersunk. Panel Fixing to Frame
Door Assembly
[2]
Door Assy, Door pre assembled

5 HAMPTON [1x86] V2—Jan 2023
WALL —TOP PLATE
[1] [4]
SG1130T2, Pine,70mm x 45mm x 1130mm, Single Groove, Tenon Ends. SG295T2, Pine,70mm x 45mm x 295mm, Single Groove, Tenon Ends.
DG1740A2 , Pine,70mm x 45mm x 1740mm, Double Groove, Miter Ends. DG1130T2, Pine,70mm x 45mm x 1130mm, Double Groove, Tenon Ends.
[6]
[2]
WALL - PANELS
[8]
P1130x1824, Weathertex Panel 1130
x 1824 x 9.5mm, Grooved
[2]
P1130x1824, Window Panel 1130 x 1824 x 9.5mm,
Grooved
[2]
P295x1824, Weathertex Panel
295 x 1824 x 9.5mm, Grooved
OPENING WINDOW FRAME [1]
[2]
WF-Assy, Painted Window frame [assembled]
[24]
BH20 MO/SM, Fix WF Assy to WP1130 Opening

6 HAMPTON [1x86] V2—Jan 2023
FACIA
[4] [12] [24] [12]
F1500, Painted Facia, 100 x 19 x 1500mm, 22.5
Degree.
FB189, Painted Block 70 x 45
x 189mm, Facia Spacing Block
PS32, Phillips Csk Screw #6
x 32mm Treated Pine, Fix
F1500 to FB145 .
BS100, Bugle Baen Screw
100mm Galvanized, Fix
FB140 to Gable.
Note: MO/SM = Monument / Surfmist
ROOF—Gable Frame
[44]
PS32CSK, Phillips Screw #6 x
32mm, Countersunk. Panel Fixing
to Door Frame
[2]
GPL, Gable Panel Le, 1095 x 454 x 9.5mm, 22.5 Degree Pitch
[2]
GPR, Gable Panel Right, 1095 x 454 x 9.5mm, 22.5 Degree Pitch
[4]
SG1299A1, Pine, 70 x 45 x 1299mm, Single Groove Angled cut (x4)
ROOF FRAME
[12]
RF1544, Roof Frame, Pine 70 x 45 x 17544mm.
[12]
RF1125, Roof Frame, Pine 70 x 45 x 1125mm.
[8]
LP872, Lock Plate 70x45x872mm
[2]
CT-A, Collar Tie 720mm
[14]
RS1400 MO/SM, 6 Rib Roof Sheet
1400mm.
[3]
RC1800 MO/SM, Ridge Cap (A)
1800mm .
[105]
BS75, Baen Screw 75mm
Galvanized.
[6]
CH1800 MO/SM, Channel 1520mm.
[164]
RS50MO/SM, Roofing Screw, #8 x
50mm Neoprene Sealing.
[24]
RD-AS2MO/SM, Rivet
AS2.
[12]
PS50CSK, Phillips Screw #6 x
50mm, Countersunk. CT-A Fixing

7 HAMPTON [1x86] V2—Jan 2023
MISCELLANEOUS
[1] TU MO/SM, Paint Touchup
Monument / Surfmist 500ml
[1] Sil-MO/SM, Silicone sealant 300ml –
coloured
FURNITURE
[1] [4] [1]
THB, “T” Handle Black with
fixings, Keys and Locking
Quadrant
TH150B, “T” Hinge 150mm,
Black with fixings
DS1820x90, Doorstop, Wethertex Panel 1820 x 90 x 9.5mm
[2]
BB100SS, Barrel Bolt, SS, 100mm
plus Hinge Screws [12]
[20]
FB20MO/SM, Sch Screw #6 x
20mm, Flat Buon Head, DS Fixing to
Door (x8)
[1]
DST1800-63, Door Stop Top, Weathertex 1800 x 63mm
Anchor Kit [**Not issued if Heavy Floor is oponed]
[13] [13] [26]
BKT6040G, Bracket 60mm x 40mm wide,
Electro-Galvanised.
CS650, Concrete screw 6mm x 50mm. RS25, Roofing Screw 25mm

8 HAMPTON [1x86] V2—Jan 2023
WALL CONSTRUCTION—Frame & Panel
MATERIAL SELECTION - Pre-select top plate and upright components for assembly, mber is a natural material, selecng
best the best side of components will help the aesthecs of the finished shed.
PRE-DRILL - 3mm
CP1926 [4] DG1926 [5] SG1926A [2]
DG1130 [2]
DG1217A [2]
SG1740A2 [1]
SG1130T2 [6] DG1130T2 [4]
SG295T2 [2]
Drill internal webs only
Drill opposite side to engraving

9 HAMPTON [1x86] V2—Jan 2023
or
FB20, 4 x 2
[8]
FS1130
[2]
WP1130x1824
[6]
SG1130T2
[4x2]
FB20 MO/SM
[2]
DG1130T2
[16]
PS32CSK
[8]
P1130x1824
NOTE: Window posion are planned to be in door side using Single
Groove top plate. Extra opening windows panel substute any of the
Plain 1130 panels. Window posion will determine Top Plate configura-
on.
If to be on the Back wall [Opposite doors]. SG1130T2 should be
fied.
If to be placed in side walls DG1130T2 is required.
Back
Wall Panel Preparaon

10 HAMPTON [1x86] V2—Jan 2023
or
18mm
PS32CSK, 8 x 2
6 x Single Groove Top plate
[Back Wall]
4 x Double Groove Top plate
[Side Walls]

11 HAMPTON [1x86] V2—Jan 2023
PS32CSK
FB20 MO/SM
Note: Front Panel Groove is offset. Check
Orientaon before fixing Top Plates.
[2]
[2] [6]
SG295T2 FS295T2 FB20 MO/SM
[6]
PS32CSK
[2]
P295x1824
3
Wall Panel Preparaon

12 HAMPTON [1x86] V2—Jan 2023
[1] [1] [2]
Panel Assy Or WP Assy CP1924 PS32CSK
Note: Layout Lines
18mm
2mm Gap
Construct a panel with Corner
post on Right Rear face
[as per image >]
With SG top Rail [for Side wall]
4

13 HAMPTON [1x86] V2—Jan 2023
[1] [4]
Panel Assy + DG Top PS32CSK
[1]
Panel Assy + SG Top
DG Top Plate
SG Top Plate
5

14 HAMPTON [1x86] V2—Jan 2023
[1] [1] [4]
DG1130 DG1217A1 PS32CSK
Angle cut to TOP
FB32CSK [4]

15 HAMPTON [1x86] V2—Jan 2023
[1] [1] [4]
Panel Assy [DG Top] CP1924 PS32CSK
7
PS32CSK [4]
Side Wall Construcon

16 HAMPTON [1x86] V2—Jan 2023
[3] [1] [14]
Panel Assy [SG Top]
[Alt WP Assy]
CP1924 PS32CSK
[3]
DG1926
8
PS32CSK [6]
PS32CSK [8]
Once Back wall is assembled. REPEAT step 12 & 13 for assembly of opposite
Gable Wall.
Back Wall Assembly

17 HAMPTON [1x86] V2—Jan 2023
[2]
WPA1130
[2]
SG1924A1
[2]
PA295
[16]
9
Front [Door] Side Panels
REPEAT above steps for the other side [L/H in this case].
PS32CSK [8]

18 HAMPTON [1x86] V2—Jan 2023

19 HAMPTON [1x86] V2—Jan 2023
[1]
SG1740A2
[14]
FB20MO/SM
[1]
DST1800-63
10
Door Head
FB20MO/SM [13]

20 HAMPTON [1x86] V2—Jan 2023
CHECK structure for Square, once confirmed, fit remaining Screws to panels
FB20MO/SM x 30
PS32CSK x 177