STILLA ASHGROVE 8x4 User manual

V6 ASHGROVE [8x4] 01-2023
ASHGROVE [8x4]
USER MANUAL
IMPORTANT
Read carefully. Retain for future refence

V6 ASHGROVE [8x4] 01-2023
SAFETY & CARE GUIDELINES
1. Take care when moving and working with the painted panels, use the supplied packaging to avoid damage to painted
surfaces.
2. When arranging the shed components for inial check, do not store the panels laid down, stand up where possible.
3. Ensure you fully understand the use of power tools recommended for use in assembling this shed.
4. Eye protecon should be worn when necessary, when operang power tools.
5. Suitable Gloves will protect Hands, take care when handling Roof Sheeng and other Metal components
6. Use appropriate sun protecon when working outdoors.
7. Secure the shed to a suitable immovable foundaon. [We recommend: Concrete Slab or Wooden Heavy Floor]
8. Team liing of heavy items is recommended to avoid injury.
9. Touch up paint is provided in the installaon kit to address minor marks / blemishes to painted surfaces.
10. Do not stand or walk on the roof.
11. Do not lay down panels without protecng the paint
1. UNPACK & CONFIRM
Read the safety & care and guidelines.Every part needed to construct your shed is included inside the pack; Frames; panels;
doors; windows; hardware kits & roong. Please fully unpack all the parts & check against the parts checklist before con-
tacng customer service about anything you believe may be missing or damaged. Thank-you!
Protect Painted surfaces when laid down for processing.

V6 ASHGROVE [8x4] 01-2023
TOOLS REQUIRED
Light coloured crayon/chinagraph pencil white/yellow.
Phillips Bit (PH2), Baen Screw Bit, Phillips Bit #2, 5/16” Hex driver, Drill Bits 3mm & 4mm, Countersink Bit (or Combina-
on.)
This product requires a minimum of 2 persons to assemble.
For external access during as-
sembly, ensure there is ade-
quate space around the perime-
ter of the shed assembly space.
Assemble in order presented in this manual. Do not skip any processes.
or
Preparing your site
The installaon locaon needs to be at, level and solid. Pavers or a solid material that will not be
aected by weather can be used to perfectly level the shed by placing under the oor frame where
required, make sure all members are supported. If the locaon is sloped we recommend making level
with a slab or Timber oor.
If you are installing your shed on a Slla oor, this can be placed on unlevelled surfaces and levelled
up by using the 100x100 stumps provided. A separate detail is provided for Floor Installaon.

V6 ASHGROVE [8x4] 01-2023
SHED COMPONENTS
Carefully unpack all the items from shipping carton. Layout in a clean and safe area. Please check you have all compo-
nents and they have no defects before proceeding.
WALL —BOTTOM PLATE
[2] [4] [26]
FS295T2,Frame Sill,70mm x 45mm x 295mm Tenon
both Ends.
FS1130T2,Frame Sill,70mm x 45mm x 1130mm Tenon
both Ends
FB20MO/SM Sch Screw #6 x
20mm, Flat Buon Head, Panel Fixing to
Sill. T Plate xings.
WALL —UPRIGHTS
[4] [1] [136]
CP1926 Pine,70mm x 70mm x 1926mm, Corner Post, Plain Ends DG1130 Pine,70mm x 45mm x 1130mm, Double Groove, Plain End
[1] [2]
DG1217A1 Pine, 70mm x 45mm x 1217mm, Double Groove, Apex
Angle top.
SG1926A1 Pine 70 x 45 x 1926mm, Single Groove. Miter Top
PS32CSK, Phillips
Screw #6 x 32mm,
Countersunk. Panel
Fixing to Frame
Door Assembly
[2]
Door Assy, Door pre assembled
WALL —TOP PLATE
[1] [2]
SG1740A2 , Pine,70mm x 45mm x 1740mm, Single Groove, Miter Ends. DG1130T2, Pine,70mm x 45mm x 1130mm, Double Groove, Tenon Ends.
[2] [2]
SG1130T2, Pine,70mm x 45mm x 1130mm, Single Groove, Tenon Ends. DG295T2, Pine,70mm x 45mm x 295mm, Double Groove, Tenon Ends.

V6 ASHGROVE [8x4] 01-2023
ROOF—Gable Frame
[2] [4] [44]
DG421A Pine 70 x 45 x 421mm, Apex
angle cut
SG1299A,Pine, 70 x 45 x 1299mm, Single Groove Angled cut (x4) PS32CSK, Phillips Screw #6 x
32mm, Countersunk. Panel Fixing
to Door Frame
[2] [2]
GPR, Gable Panel Right, 1095 x 454 x 9.5mm, 22.5 Degree PitchGPL, Gable Panel Le, 1095 x 454 x 9.5mm, 22.5 Degree Pitch
WALL -PANELS
[4] [2]
P1130, Weathertex Panel 1130 x 1824 x 9.5mm, Grooved P295, Weathertex Panel 295 x 1824 x 9.5mm, Grooved
ROOF FRAME
[4] [4]
RF1148, Roof Frame, Pine 70 x 45 x 1148mm. RF1125, Roof Frame, Pine 70 x 45 x 1125mm.
[4] [1] [36]
RS1400 MO/SM, 6 Rib Roof Sheet RC1520 MO/SM, Ridge Cap (A) 1520mm .
[2] [52] [12]
CH1520 MO/SM, Channel 1520mm. RS50MO/SM, Roong Screw, #8 x 50mm RD-AS2MO/SM, Rivet AS2.
BS75, Baen Screw 75mm Galvanized.

V6 ASHGROVE [8x4] 01-2023
FACIA
[4] [12] [12] [12]
F1500, Painted Facia, 100 x 19 x 1500mm, 22.5
Degree.
FB143, Painted Block 70 x 45
x 143mm, Facia Spacing Block
PS32, Phillips Csk Screw #6
x 32mm Treated Pine, Fix
F1500 to FB145 .
BS100, Bugle Baen Screw
100mm Galvanized, Fix
FB140 to Gable.
Note: MO/SM = Monument / Surfmist
MISCELLANEOUS
[1] TU MO/SM, Paint Touchup
Monument / Surfmist 500ml
[1] Sil-MO/SM, Silicone sealant 300ml –
coloured
FURNITURE
[1] [4] [1]
THB, “T” Handle Black with
xings, Keys and Locking
Quadrant
TH150B, “T” Hinge 150mm,
Black with xings
DS1820x90, Doorstop, Wethertex Panel 1820 x 90 x 9.5mm
[2]
BB100SS, Barrel Bolt, SS, 100mm
plus Hinge Screws [12]
[20]
FB20MO/SM,Sch Screw #6 x
20mm, Flat Buon Head, DS Fixing to
Door (x8)
[1]
DST1800, Door Stop Top, Weathertex 1800 x 83mm
Anchor Kit [**Not issued if Heavy Floor is oponed]
[7] [7] [14]
BKT6040G, Bracket 60mm x 40mm wide,
Electro-Galvanised.
CS650, Concrete screw 6mm x 50mm. RS25, Roong Screw 25mm
Note: MO/SM = Monument / Surfmist

V6 ASHGROVE [8x4] 01-2023
WALL CONSTRUCTION—Frame & Panel
MATERIAL SELECTION -Pre-select top plate and upright components for assembly, mber is a natural material, selecng
best the best side of components will help the aesthecs of the nished shed.
PRE-DRILL -3mm
CP1926 [4] SG1926A [2]
DG1130 [1]
DG1217A [1]
SG1740A2 [1]
SG1130 [2]
DG295T2 [2]
Drill internal webs only

V6 ASHGROVE [8x4] 01-2023
[1x4]
P1130x1824
[1x4]
FS1130
[4x2]
FB20 MO/SM
[2]
DG1130T2
[2]
SG1130T2
[4x2]
PS32CSK
or
or
18mm
FB20, 4 x 2
PS32CSK, 4 x 2
2 x Single Groove Top plate
[Side Wall]
2 x Double Groove Top plate
[Rear Wall]
CP1926 or DG1926 can be used as a gauge to ensure ideal panel height of the
top plate component.
Overall height of panels should be equal to vercal beams
[1926mm].

V6 ASHGROVE [8x4] 01-2023
[1] [1] [2]
Panel Assy CP1924 PS32CSK
Note: Layout Lines
18mm
2mm Gap
Construct 2 panels with Corner
post on Right Rear face
[as per image >.]
One with a DG top Rail [for back
wall]
One with SG top Rail [for Side
wall]

V6 ASHGROVE [8x4] 01-2023
[2] [2]
Panel Assy + CP1924 + DG Top PS32CSK Panel Assy + CP1924 + SG Top
Groove Top Plate Plain Top Plate

V6 ASHGROVE [8x4] 01-2023
[1] [1] [6]
DG1130 DG1217A1 PS32CSK
Angle cut to TOP

V6 ASHGROVE [8x4] 01-2023
[1] [1] [6]
Panel Assy [DG Top] CP1924 PS32CSK
PS32CSK
X 6

V6 ASHGROVE [8x4] 01-2023
[1] [1] [4]
Panel Assy [SG Top] CP1924 PS32CSK

V6 ASHGROVE [8x4] 01-2023
[2] [2] [6]
DG295T2 FS295T2 FB20 MO/SM
[6]
PS32CSK
[2]
P295x1824
PS32CSK
FB20 MO/SM
Note: Front Panel Groove is oset. Check
Orientaon before xing Top Plates.
Overall height of panels should be equal to vercal beams [1926mm].

V6 ASHGROVE [8x4] 01-2023
PS32CSK
Rear panels hidden for clarity
[2] [4]
Front Panel Assy PS32CSK
9

V6 ASHGROVE [8x4] 01-2023
[2] [4]
SG1926A1 PS32CSK
[1]
SG1740A2
[12]
FB20MO/SM
10

V6 ASHGROVE [8x4] 01-2023
PS32CSK
X 4

V6 ASHGROVE [8x4] 01-2023
Door Stop Top
FB20MO/SM [13]
[1]
SG1740A2
[14]
FB20MO/SM
[1]
DST1800
11

V6 ASHGROVE [8x4] 01-2023
CHECK structure for Square, once conrmed t remaining Screws to panels
FB20MO/SM x 12
PS32CSK x 46

V6 ASHGROVE [8x4] 01-2023
[4]
SG1299A2
[1]
DG451A2
PRE-DRILL -3mm
18mm
18mm
?
[4] [1]
SG1299A2 DG451A1
[12] [12]
FB143 BS100
12
GABLES—Preparaon