Stinger STXKBR4 User manual

®
2 Channel Amplier Wiring Kit
Installation Guide
StingerElectronics.com
STXKBR4 - 4GA
STXKBR8 - 8GA
2021+ Ford Bronco

2StingerElectronics.com
®
2
®
LIMITED WARRANTY:
Stinger warrants this product to be free of defects in materials and workmanship for
a period of one (1) years from the original date of purchase. This warranty is not
transferable and applies only to the original purchaser from an authorized Stinger
dealer in the United States of America only. Should service be necessary under this
warranty for any reason due to manufacturing defect or malfunction, Stinger will (at
its discretion), repair or replace the defective product with new or remanufactured
product at no charge. Damage caused by the following is not covered under
warranty: accident, misuse, abuse, product modication or neglect, failure to follow
installation instructions, unauthorized repair attempts, misrepresentations by the
seller. This warranty does not cover incidental or consequential damages and does
not cover the cost of removing or reinstalling the unit(s). Cosmetic damage due to
accident or normal wear and tear is not covered under warranty.
INTERNATIONAL WARRANTIES:
Products purchased outside the United States of America are covered only by that
country’s Authorized Stinger reseller and not by Stinger. Consumers needing service
or warranty information for these products must contact that country’s reseller for
information.
Contents Page
What's In The Kit 5
Installation 6
Adding A Second X-Link Fuse Holder 19

3
StingerElectronics.com 3
LIMITED WARRANTY:
Stinger warrants this product to be free of defects in materials and workmanship for
a period of one (1) years from the original date of purchase. This warranty is not
transferable and applies only to the original purchaser from an authorized Stinger
dealer in the United States of America only. Should service be necessary under this
warranty for any reason due to manufacturing defect or malfunction, Stinger will (at
its discretion), repair or replace the defective product with new or remanufactured
product at no charge. Damage caused by the following is not covered under
warranty: accident, misuse, abuse, product modication or neglect, failure to follow
installation instructions, unauthorized repair attempts, misrepresentations by the
seller. This warranty does not cover incidental or consequential damages and does
not cover the cost of removing or reinstalling the unit(s). Cosmetic damage due to
accident or normal wear and tear is not covered under warranty.
INTERNATIONAL WARRANTIES:
Products purchased outside the United States of America are covered only by that
country’s Authorized Stinger reseller and not by Stinger. Consumers needing service
or warranty information for these products must contact that country’s reseller for
information.
Contents Page
What's In The Kit 5
Installation 6
Adding A Second X-Link Fuse Holder 19
Installation Notes:
 Read this installation guide thoroughly before disassembling or
modifying the vehicle. Installation of this product requires technical skill,
experience and specialized tools. If in doubt, it’s recommended to have
it professionally installed by an authorized Stinger Dealer.
 Designed for front driver or passenger under-seat amplifier locations.
 Make sure wire gauge matches amplifier power/ground inputs.
 The included fuse is to protect the wiring going to the amplifier,
not the amplifier itself. Refer to the amplifier manufactures recommended
fuse rating for the amplifier.

4StingerElectronics.com
®
4
®
ITEM DESCRIPTION QTY
1 Fuse to Vehicle Battery Wire (22in) 1
2Fuse to Amplier Wire (17ft) 1
3 Remote Turn-On Wire (10ft) 1
4Amplier Ground Wire (24in) 1
5 Fuse Holder Mounting Plate 1
6 2-Channel RCA Cable (12ft) 1
7Ferrules/Heat Shrink 2
8 Rubber Grommet (5/8") 1
97" Wire Ties 10
10 X-Link Fuse Holder & ANL Fuse 1
11 X-Link X-pansion Jumper 1
12 Fuse Holder Mounting Screws 1
What's In The Kit

5
StingerElectronics.com 5
1
3
4
56
78
9
10
11
12
2