Storz & Bickel GMBH Volcano Instruction manual

approx. 3 sec
approx. 1 mm
STORZ & BICKEL GMBH & CO. KG
1.
choose temperatur
Quick Start Manual
2.
switch heat on (takes 3-5 min.)
4.
fill filling chamber
3.
grind substance
5.
insert filling chamber insert
6.
preheat substance if
control lamp is off
7.
„click” valve balloon
on filling chamber
8.
watch vapor density
9.
remove full balloon unit
11.
Caution! Causes burns !
don´t leave filling chamber on VOLCANO
12.
„click” mouthpiece on
valve balloon
13.
press mouthpiece against
lips to inhale
max. 10 mm
min. 1 mm
max. 1/2 inch
min. 1/16 inch
10.
separate valve balloon
from filling chamber
Storz & Bickel GmbH & Co. KG · Rote Strasse 1 · 78532 Tuttlingen/Germany · Tel. [phone] · Fax [phone] · internet: www.storz-bickel.com

STORZ & BICKEL GMBH & CO. KG
Dismantling, Cleaning, Replacing the balloon
Storz & Bickel GmbH & Co. KG · Rote Strasse 1 · 78532 Tuttlingen/Germany · Tel. [phone] · Fax [phone] · internet: www.storz-bickel.com
1.
draw of lip piece
2.
dismantled
mouthpiece
3.
draw of
balloon
4.
srew off
valve cap
5.
dismantled
valve
6.
screw off nut from
filling chamber insert
7.
dismantled filling
chamber insert
8.
draw off filling
chamber ring
9.
srew off filling
chamber cylinder
10.
dismantled
filling chamber
11.
manual cleaning
with alcohol (min 90 %)
12.
cut off balloon
13.
tie up balloon
14.
attach first balloon
fixation ring
15.
attach balloon to valve
16.
align balloon to valve
17.
evert balloon mantle
18.
attach second balloon
fixation ring to secure
19.
ready to use