Strata Furniture Antero Bed Full User manual

Headboard x 1
Hardware in Box 2 of 2:
Bolts (70mm) x 1
For the Center Slat
Support Foot
Bolts (90mm) x 2
For the Outside Slat
Support Feet
Screw x 24
For Slats
Allen Key x 2
One for 12mm Bolts,
One for 70mm & 90mm Bolts
Bolts (12mm) x 8
For the Headboard
and Footboard
Assembly Instructions for Antero Bed, Full & Queen
Page 1 of 4
Parts in Box 1 of 2:
Strata
Strata
urniture
1A
1B
Parts in Box 2 of 2:
1C
Watch our assembly videos at www.stratafurniture.com/videos.html
Footboard x 1
Stretcher x 2
Slats x 1 Slat Support Feet x 3
Center Rail x 1

Assembly Instructions for Platform Bed, Full & Queen
Page 2 of 4
Insert 12mm Bolts into Headboard and Footboard.
Leave bolts loose!
Connect the Stretchers to the Headboard and Footboard.
Drop Stretcher bracket over 12mm Bolts on Headboard and Footboard
as shown.
Tighten all 12mm Bolts with Allen Key.
Strata
Strata
urniture
2A 2B
Headboard*
*Headboard style may vary.
Bolts
12mm
Footboard
Stretcher
Stretcher
Stretcher
Bolts 12mm
Bolts
12mm
Bolts 12mm

Assembly Instructions for Platform Bed, Full & Queen
Page 3 of 4
Strata
Strata
urniture
3A 3B
Roll slats out on top of Stretchers with Strip-side down.
Make sure slats are evenly spaced!
Attach one of the Slat Support Feet to the Center
Rail using the 70mm Bolt as shown.
Place Center Rail beneath the slats so it aligns with
pre-drilled holes in the slats.
Headboard*
*Headboard style may vary.
Stretcher
Stretcher
Slats
Center Rail
Slat Support Foot
70mm Bolt
Footboard

Assembly Instructions for Platform Bed, Full & Queen
Page 4 of 4
Strata
Strata
urniture
4A 4B
Using 90mm Bolts, attach remaining Slat Support Feet to Slats and
Center Rail as shown. Attach Slats to Stretchers using Screws as shown.
An electric screwdriver is helpful for this step.
Headboard*
*Headboard style may vary.
Stretcher
Stretcher
Slats
Footboard
90mm Bolt
Center Rail
Slat Support
Foot
Slat
Screws
Stretcher
Slats
90mm Bolt