Strata Furniture 18220 User manual

Hardware in Box 2 of 2:
Bolts (70mm) x 3
For the Slat Support Feet
Screw x 28
For Slats, Slat Support
Allen Key x 2
One for 12mm Bolts,
One for 70mm & 90mm Bolts
Bolts (16mm) x 8
For the Headboard
and Footboard
Assembly Instructions for Basic Bed, Full & Queen
Page 1 of 4
Parts in Box 1 of 2:
Strata
Strata
urniture
1A
1B
Parts in Box 2 of 2:
1C
Watch our assembly videos at www.stratafurniture.com/videos.html
Headboard / Footboard x 2
Stretcher x 2
Slats* x 1
*May come in separate box
Slat Support Feet x 3
Center Rail x 1

Assembly Instructions for Platform Bed, Full & Queen
Page 2 of 4
Insert 16mm Bolts into Headboard and Footboard.
Leave bolts loose!
Connect the Stretchers to the Headboard and Footboard.
Drop Stretcher bracket over 16mm Bolts on Headboard and Footboard
as shown.
Tighten all 16mm Bolts with Allen Key.
Strata
Strata
urniture
2A 2B
Headboard*
*Headboard style may vary.
Bolts
16mm
Footboard
Stretcher
Stretcher
Stretcher
Bolts 16mm
Bolts
16mm
Bolts 16mm

Assembly Instructions for Platform Bed, Full & Queen
Page 3 of 4
Strata
Strata
urniture
3A 3B
Roll slats out on top of Stretchers with Strip-side down.
Make sure slats are evenly spaced!
Attach the Slat Support Feet to the Center Rail
using the 70mm Bolts as shown.
Place Center Rail beneath the slats so it aligns with
pre-drilled holes in the slats.
Headboard*
*Headboard style may vary.
Stretcher
Stretcher
Slats
Center Rail
Slat Support Feet
70mm Bolt
Footboard

Assembly Instructions for Platform Bed, Full & Queen
Page 4 of 4
Strata
Strata
urniture
4A 4B
Using two Screws, attach Center Rail to slats as shown. Attach Slats to Stretchers using Screws as shown.
An electric screwdriver is helpful for this step.
Headboard*
*Headboard style may vary.
Stretcher
Stretcher
Slats
Footboard
Screw
Center Rail
Slat Support
Foot
Slat
Screws
Stretcher
Slats
Screw