Stratco SPACE-SAVER 2 User manual

SPACE-SAVER SHELF INSTALLATION GUIDE
SPACE-SAVER 2 SHELF UNIT
INSTALL GUIDE
To ensure that the installation and erection of your Stratco Space-Saver Shelf proceeds smoothly you should confirm that all the components and materials in this
installation guide, have been supplied. Carefully read this installation guide to familiarise yourself with all the steps involved, and ensure that you have the correct
tools and equipment for the job. Please ensure gloves and safety proection is worn when handling and assembling the shelving unit and components.
A. SHELF (x2) B. CORNER STIFFENER
(x4)
F. HOOK BRACKET (LEFT)
(x1)
D. GUSSET STRAP (x4)
C.ANGLE BRACKET (x6)
G. HOOK BRACKET (RIGHT)
(x1)
E. LEG BRACKET (x3)
BEFORE YOU START
TOOLS REQUIRED
COMPONENTS
Phillips Head Screw
Driver
Adjustable Spanner Power Drill

« Scan this QR code with your smart phone to find a Stratco near you.
QUEENSLAND • NEW SOUTH WALES • VICTORIA
AUSTRALIAN CAPITAL TERRITORY • SOUTH AUSTRALIA
WESTERN AUSTRALIA • NORTHERN TERRITORY stratco.com.au
Ph: 1300 155 155
All brands and logos/images accompanied by ® or ™ are trade marks of Stratco (Australia) Pty Limited.
® Copyright October 2017CODE SS-10027 FORM S-999
COMPONENT LAYOUT
C
A
D
E
E
G
F
E
B
B
D
C
B
D
A
B
C
C
C
C
D
COMPONENT LIST
A. SHELF
B. CORNER STIFFENER
C. ANGLE BRACKET
D. GUSSET STRAP
E. LEG BRACKET
F. HOOK BRACKET (LEFT)
G. HOOK BRACKET (RIGHT)
H.10X16 HEX HEAD SELF DRILLING TEK SCREWS
I. M5X8 PHILLIPS HEAD SCREWS & HEX NUTS
NOTE: Each shelf holds 25kg distributed load.