Stryker 1900 User manual

CCUUBB®® PPeeddiiaattrriicc CCrriibb
OOppeerraattiioonnss MMaannuuaall
FL19H (1900)
EN
ES
FR
PT
ZH
1900-009-005 Rev AA.0 2022-08

SSyymmbboollss
General Warning
Caution
Consult instructions for use
Safe working load
No pushing
Type BF applied part
IIPPXX44 Protection from liquid splash
Direct Current
Medical Equipment approved by the Canadian Standards Association with Respect to Electric Shock, Fire,
Mechanical and Other Specified Hazards
In accordance with European Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE)
as amended, this symbol indicates that the product should be collected separately for recycling. Do not
dispose of as unsorted municipal waste. Contact local distributor for disposal information. Ensure infected
equipment is decontaminated prior to recycling.
Catalogue number

Serial number
Manufacturer
Date of manufacture
1900-009-005 Rev AA.0 EN

TTaabbllee ooff CCoonntteennttss
Warning/Caution/Note Definition ....................................................................................................................2
Summary of safety precautions ...............................................................................................................2
Introduction ..................................................................................................................................................4
Product description ................................................................................................................................4
Indications for use ..................................................................................................................................4
Contraindications ...................................................................................................................................4
Expected service life...............................................................................................................................4
Specifications ........................................................................................................................................4
Product illustration..................................................................................................................................6
Contact information ................................................................................................................................7
Serial number location............................................................................................................................7
Setup...........................................................................................................................................................8
Operation.....................................................................................................................................................9
Base controls.........................................................................................................................................9
Applying and releasing the brakes .........................................................................................................10
Transporting a patient with the retractable fifth wheel ..............................................................................10
Raising the litter ...................................................................................................................................10
Lowering the litter.................................................................................................................................11
Positioning the product in Trendelenburg ...............................................................................................11
Positioning the product in reverse Trendelenburg ...................................................................................11
Raising or lowering the manual Fowler backrest .....................................................................................12
Raising or lowering the pneumatic Fowler backrest.................................................................................12
Raising or lowering the foot section .......................................................................................................12
Raising the siderail...............................................................................................................................12
Lowering the siderail.............................................................................................................................13
Opening the access doors option...........................................................................................................14
Closing the access doors option ............................................................................................................14
Scale control panel option.....................................................................................................................14
Weighing a patient.........................................................................................................................15
Setting the scale memory...............................................................................................................16
Zeroing the scale...........................................................................................................................16
Changing equipment......................................................................................................................16
Changing the scale units................................................................................................................16
Replacing the scale batteries..........................................................................................................16
Accessories and parts.................................................................................................................................18
Standard accessory bracket..................................................................................................................18
Premium accessory bracket option ........................................................................................................19
Securing the oxygen bottle into the retaining collar option........................................................................19
Attaching the upright oxygen bottle holder..............................................................................................20
Attaching the defibrillator tray................................................................................................................21
Attaching the IV caddy..........................................................................................................................21
Positioning the two-stage permanently attached IV pole option ................................................................22
Positioning the three-stage permanently attached IV pole option..............................................................23
Attaching and positioning the removable IV pole (FA64135) ....................................................................24
Attaching and positioning the removable IV pole (FDTSH).......................................................................25
Chart holder/monitor holder option.........................................................................................................25
Attaching the retracting protective top ....................................................................................................26
Positioning the retracting protective top..................................................................................................27
Attaching the protective top with supports ..............................................................................................27
Positioning the protective top with supports ............................................................................................28
Preventive maintenance..............................................................................................................................30
Cleaning ....................................................................................................................................................32
Disinfecting ................................................................................................................................................33
1900-009-005 Rev AA.0 1 EN

WWaarrnniinngg//CCaauuttiioonn//NNoottee DDeeffiinniittiioonn
The words WWAARRNNIINNGG,CCAAUUTTIIOONN, and NNOOTTEE carry special meanings and should be carefully reviewed.
WWAARRNNIINNGG
Alerts the reader about a situation which, if not avoided, could result in death or serious injury. It may also describe
potential serious adverse reactions and safety hazards.
CCAAUUTTIIOONN
Alerts the reader of a potentially hazardous situation which, if not avoided, may result in minor or moderate injury to the
user or patient or damage to the product or other property. This includes special care necessary for the safe and effective
use of the device and the care necessary to avoid damage to a device that may occur as a result of use or misuse.
NNoottee -- Provides special information to make maintenance easier or important instructions clearer.
SSuummmmaarryy ooff ssaaffeettyy pprreeccaauuttiioonnss
Always read and strictly follow the warnings and cautions listed on this page. Service only by qualified personnel.
WWAARRNNIINNGG
• Always allow the product to reach room temperature before you set up the product or test functional operations.
Permanent product damage may occur.
• Always operate the product when all operators are clear of the mechanisms.
• Always apply the brakes when a patient is getting on the product or off the product or when the product is not moving.
Injury could result if the product moves while a patient is getting on the product or off the product.
• Always position the patient in the center of the product.
• Always remove any devices that may be in the way before you raise or lower the litter.
• Always lock the siderails in the full up position with the sleep surface flat and in the lowest position when you transport a
patient.
• Do not move the crib laterally with the fifth wheel applied.
• Always put the product in the lowest position with the siderails up and latched and access doors closed and locked when
you leave a patient unattended on the product. Do not leave the product at a higher height.
• Always make sure the siderails are up and latched before you put the product in a Trendelenburg position.
• Always make sure that the foot section support arm is secure in the arm supports before you release the Fowler or foot
section.
• Always keep operator and patient limbs away from the siderails when you raise or lower the siderail.
• Always make sure that the open/close indicators show green when the door is closed.
• Do not place items that weigh more than 30 lb (14 kg) on the defibrillator tray. Always strap down all devices that you
place on the defibrillator tray.
• Always secure the IV pole to the IV caddy when you transport the product.
• Always store the IV caddy when not in use to avoid product damage.
• Always make sure that the IV pole is positioned so that the patient cannot reach or manipulate the IV pole.
• Do not use the IV pole as a push/pull device. Product damage may occur.
• Do not hang IV bags that exceed 11 lb (5 kg) when you use the removable IV pole FDTSH.
• Always remove the patient from the product before you install the protective top.
• Always turn off the scale before you install the protective top.
• Always secure the protective top and make sure the protective top extends and retracts before you return the product to
service.
• Always make sure to lock both lower rails before you leave a patient unattended.
• Always use the center of the lower rail to close the protective top.
EN 2 1900-009-005 Rev AA.0

CCAAUUTTIIOONN
• Improper usage of the product can cause injury to the patient or operator. Operate the product only as described in this
manual.
• Do not modify the product or any components of the product. Modifying the product can cause unpredictable operation
resulting in injury to patient or operator. Modifying the product also voids its warranty.
• Do not lean on the bracket of the scale module.
• Do not use a foot end fixed IV pole on a product with the scale option.
• Always remove external equipment from the product litter when you zero the scale or weigh a patient.
• Always zero the scale at least once a week to maintain scale accuracy.
• Always use 1.5 VDC alkaline batteries.
• Always remove the batteries from the product during long periods of disuse.
• Do not load the IV pole above the safe working load of 40 lb (18 kg).
• Do not load an IV pole hook above the safe working load of 11 lb (5 kg).
• Do not use the protective top as a push/pull device. Product damage may occur.
• Do not clean, disinfect, service, or perform maintenance while the product is in use.
• Always clean VVeellccrroo®® after each use. Saturate VVeellccrroo with disinfectant and allow disinfectant to evaporate. Appropriate
disinfectant for nylon VVeellccrroo should be determined by the hospital.
• Always wipe down with clean water and dry each product after disinfecting. Some disinfectants are corrosive in nature
and may cause damage to the product. If you do not rinse and dry the product, you may leave a corrosive residue on the
surface of the product. This corrosive residue could cause premature degradation of critical components. Failure to
follow these disinfecting instructions may void your warranty.
• Do not use quaternary disinfectants formulated with glycol ethers.
• Do not use VViirreexx®® TB when you clean the crib. VViirreexx TB is not an approved cleaning agent for this product.
1900-009-005 Rev AA.0 3 EN

IInnttrroodduuccttiioonn
This manual assists you with the operation or maintenance of your Stryker product. Read this manual before operating or
maintaining this product. Set methods and procedures to educate and train your staff on the safe operation or maintenance
of this product.
CCAAUUTTIIOONN
• Improper usage of the product can cause injury to the patient or operator. Operate the product only as described in this
manual.
• Do not modify the product or any components of the product. Modifying the product can cause unpredictable operation
resulting in injury to patient or operator. Modifying the product also voids its warranty.
NNoottee
• This manual is a permanent part of the product and should remain with the product even if the product is sold.
• Stryker continually seeks advancements in product design and quality. This manual contains the most current product
information available at the time of printing. There may be minor discrepancies between your product and this manual. If
you have any questions, contact Stryker Customer Service or Technical Support at 1-800-327-0770.
PPrroodduucctt ddeessccrriippttiioonn
The Stryker Model FL19H CCUUBB®® pediatric crib is a pediatric medical crib that consists of moveable and latchable rails, an
accompanying mattress, and an adjustable bed surface.
IInnddiiccaattiioonnss ffoorr uussee
The Stryker Model FL19H CCUUBB pediatric crib is intended to provide a pediatric patient support surface for medical purposes
and to provide a method of transporting pediatric patients within a healthcare facility.
CCoonnttrraaiinnddiiccaattiioonnss
None known.
EExxppeecctteedd sseerrvviiccee lliiffee
The CCUUBB pediatric crib has a 10 year expected service life under normal use conditions and with appropriate periodic
maintenance.
SSppeecciiffiiccaattiioonnss
Safe working load
NNoottee:: Safe working load indicates the sum of the occupant and
accessory weight. 100 lb 45 kg
Product weight capacity 400 lb 181 kg
Product weight 375 lb 170 kg
Scale system capacity option, loads weighing up to: 4 lb to 100 lb 1.8 kg to 54.4 kg
EN 4 1900-009-005 Rev AA.0

Scale system accuracy option Perform scale measurement when
unit is flat:
± 0.5 lb (0.2 kg) for patients
weighing 50 lb (22 kg) or less
± 1.0 lb (0.4 kg) for patients
weighing ≥ 50 lb (22 kg)
Height range (to litter top) High 40 in. 102 cm
Low 33 in. 84 cm
Patient sleep surface 29.5 in. x 57 in. 75 cm x 145 cm
Litter position
Manual activated 0° / 25° / 40° / 55°
Pneumatic assist 0° - 50°
Trendelenburg/reverse Trendelenburg ± 9.5°
Foot section angle 0° / 6° / 12°
Power system, scale option Battery operated: 4 x C type,
alkaline, 1.5 VDC
Electrical requirements, scale option 6 VDC, 0.15 A
CCoommppaattiibbllee mmaattttrreessss
55-0072 58.25 in. x 30.13 in. x 4 in. 148 cm x 76.53 cm x 10.16
cm
EEnnvviirroonnmmeennttaall ccoonnddiittiioonnss OOppeerraattiioonn SSttoorraaggee aanndd ttrraannssppoorrttaattiioonn
Ambient temperature
85 °F
(29.1 °C)
60 °F
(15.5 °C)
122 °F
(50 °C)
-22 °F
(-30 °C)
Relative humidity (non-condensing)
95%
0%
95%
0%
Atmospheric pressure
1060 hPa
700 hPa
1060 hPa
500 hPa
Specifications listed are approximate and may vary slightly from product to product or by power supply fluctuations.
Stryker reserves the right to change specifications without notice.
SSttaannddaarrddss aapppplliieedd
CAN/CSA C22.2 No. 601.1-M90 (AM1 + AM2) Medical Electrical Equipment - Part 1: General
Requirements for Safety - General Instruction No 1; Update
No 2
UL60601-1 Medical Electrical Equipment, Part 1: General
Requirements for Safety
IEC 60601-1: 1988 (AM1 + AM2) Medical Electrical Equipment Part 1: General
Requirements for Safety - Edition 2.0; Amendment 1: 11-
1991, Amendment 2: 03-1995, Corrigendum 1: 6-1995,
CENELEC EN 60601-1:1990
1900-009-005 Rev AA.0 5 EN

PPrroodduucctt iilllluussttrraattiioonn
ABC
D
GH
I
J
K
L
MNOP
Q
R
E
F
FFiigguurree 11 –– PPrroodduucctt iilllluussttrraattiioonn
A Fowler backrest J Scale module option
B Siderail K Siderail activiation handle
C Endrail L Pump pedal
DAccess door option M Ground chain
EAccess door release knobs option NUni-lower pedal
FBrake/steer pedal option O Pneumatic head section activation lever
G Foot section P IV caddy arm option
EN 6 1900-009-005 Rev AA.0

HDrainage bag hook QOxygen bottle retaining collar option
IFoot section support arm RPremium accessory brackets option
CCoonnttaacctt iinnffoorrmmaattiioonn
Contact Stryker Customer Service or Technical Support at: 1-800-327-0770.
Stryker Medical
3800 E. Centre Avenue
Portage, MI 49002
USA
To view your operations or maintenance manual online, see https://techweb.stryker.com/.
Have the serial number (A) of your Stryker product available when calling Stryker Customer Service or Technical Support.
Include the serial number in all written communication.
SSeerriiaall nnuummbbeerr llooccaattiioonn
You can find the serial number (A) on the right foot end of the litter frame (Figure 2).
A
FFiigguurree 22 –– SSeerriiaall nnuummbbeerr llooccaattiioonn
1900-009-005 Rev AA.0 7 EN

SSeettuupp
To unpack your product, see the unpacking instructions that are attached to the product inside of the shipping crate.
WWAARRNNIINNGG
• Always allow the product to reach room temperature before you set up the product or test functional operations.
Permanent product damage may occur.
• Always operate the product when all operators are clear of the mechanisms.
Verify proper operation before you put the product into service.
1. Apply the brake. Push on the product to make sure that all four casters are locked.
2. Release the brake. Push on the product to make sure that all four casters are unlocked.
3. Raise and lower the litter with the hydraulic lift system.
4. Raise the product to the highest height position and put the product in the Trendelenburg position. See
Positioning the
product in Trendelenburg
(page 11).
NNoottee -- Make sure that the head end lowers to the full down position.
5. Raise the product to the highest height position and put the product in the reverse Trendelenburg position. See
Positioning the product in reverse Trendelenburg (page 11).
NNoottee -- Make sure that the foot end lowers to the full down position.
6. Apply the fifth wheel option and make sure that it guides and pivots the product.
7. Make sure that the access doors option open, close, and lock.
8. Make sure that the siderails and endrails raise, lower, and lock in the 9 in. option, 14 in., and upper position.
9. Raise and lower the manual Fowler backrest (head end section).
10.Raise and lower the manual foot section.
EN 8 1900-009-005 Rev AA.0

OOppeerraattiioonn
BBaassee ccoonnttrroollss
HEAD END
RIGHT
LEFT
AB
B
A
C
C
D
D
E
E
FFiigguurree 33 –– BBaassee ccoonnttrroollss
APump to raise the litter
BLowers both ends of the product together
CPlaces the product in the Trendelenburg position
(head down, foot up)
DPlaces the product in the reverse Trendelenburg
position (head up, foot down)
EBrake and steer functions
1900-009-005 Rev AA.0 9 EN

AAppppllyyiinngg aanndd rreelleeaassiinngg tthhee bbrraakkeess
WWAARRNNIINNGG -- Always apply the brakes when a patient is getting on the product or off the product or when the product is not
moving. Injury could result if the product moves while a patient is getting on the product or off the product.
To apply the brakes, push down on the brake (red) side of the brake/steer pedal. Push on the product to make sure that the
brakes work.
To release the brakes, push down on the steer (green) side of the brake/steer pedal.
A
A
FFiigguurree 44 –– OOppeerraattiinngg tthhee bbrraakkee//sstteeeerr ppeeddaall
NNoottee -- Do not push down on the center of the brake/steer pedal. Always push down on the outer side (A) of the brake/steer
pedal (Figure 4).
TTrraannssppoorrttiinngg aa ppaattiieenntt wwiitthh tthhee rreettrraaccttaabbllee ffiifftthh wwhheeeell
WWAARRNNIINNGG
• Always position the patient in the center of the product.
• Always remove any devices that may be in the way before you raise or lower the litter.
• Always lock the siderails in the full up position with the sleep surface flat and in the lowest position when you transport a
patient.
• Do not move the crib laterally with the fifth wheel applied.
To transport a patient with the retractable fifth wheel:
1. Push down on the steer side of the brake/steer pedal (E) to apply the fifth wheel (
Base controls (page 9)).
2. Put the pedal in the neutral position to move the product laterally. Move the product to the desired location.
3. Push down on the brake side of the brake/steer pedal (E) to lock the product in place (
Base controls (page 9)).
NNoottee -- Always make sure that the brake is released before you move the product to avoid operator or patient injury.
RRaaiissiinngg tthhee lliitttteerr
WWAARRNNIINNGG
• Always position the patient in the center of the product.
• Always put the product in the lowest position with the siderails up and latched and access doors closed and locked when
you leave a patient unattended on the product. Do not leave the product at a higher height.
• Always remove any devices that may be in the way before you raise or lower the litter.
To raise the litter, press down on the pump pedal (A) until you achieve the desired height (
Base controls (page 9)).
EN 10 1900-009-005 Rev AA.0

LLoowweerriinngg tthhee lliitttteerr
WWAARRNNIINNGG
• Always position the patient in the center of the product.
• Always put the product in the lowest position with the siderails up and latched and access doors closed and locked when
you leave a patient unattended on the product. Do not leave the product at a higher height.
• Always remove any devices that may be in the way before you raise or lower the litter.
To lower the entire litter, press down on the center of the uni-lower pedal (B) (
Base controls (page 9)).
To lower the head end of the litter, press down on the side of the uni-lower pedal (C) closest to the head end of the product
(
Base controls (page 9)).
To lower the foot end of the litter, press down on the side of the uni-lower pedal (D) closest to the foot end of the product
(
Base controls (page 9)).
PPoossiittiioonniinngg tthhee pprroodduucctt iinn TTrreennddeelleennbbuurrgg
WWAARRNNIINNGG
• Always make sure the siderails are up and latched before you put the product in a Trendelenburg position.
• Always remove any devices that may be in the way before you raise or lower the litter.
To position the product in the Trendelenburg position (head down), raise the litter to the highest height. See
Raising the
litter
(page 10).
NNoottee -- Raise the litter to the highest height for a greater Trendelenburg angle.
To lower the head end of the product, push down on the side of the uni-lower pedal (C) closest to the head end (
Base
controls
(page 9)).
To lower the product from the Trendelenburg position, push down on the center of the uni-lower pedal (B) until the litter is
flat (
Base controls (page 9)).
PPoossiittiioonniinngg tthhee pprroodduucctt iinn rreevveerrssee TTrreennddeelleennbbuurrgg
WWAARRNNIINNGG
• Always make sure the siderails are up and latched before you put the product in a Trendelenburg position.
• Always remove any devices that may be in the way before you raise or lower the litter.
To position the product in the reverse Trendelenburg position (foot down), raise the litter to the highest height. See
Raising
the litter
(page 10).
NNoottee -- Raise the litter to the highest height for a greater Trendelenburg angle.
To lower the foot end of the product, push down on the side of the uni-lower pedal (D) closest to the foot end (
Base controls
(page 9)).
To lower the product from the reverse Trendelenburg position, push down on the center of the uni-lower pedal (B) until the
litter is flat (
Base controls (page 9)).
1900-009-005 Rev AA.0 11 EN

RRaaiissiinngg oorr lloowweerriinngg tthhee mmaannuuaall FFoowwlleerr bbaacckkrreesstt
WWAARRNNIINNGG
• Always position the patient in the center of the product.
• Always make sure that the foot section support arm is secure in the arm supports before you release the Fowler or foot
section.
To raise the Fowler backrest, lift up the Fowler backrest (A) until the foot section support arm is secure in the desired
position (25°, 40°, and 55°) (
Product illustration (page 6)).
To lower the Fowler backrest, lift up the Fowler backrest (A) to release the foot section support arm and lower the Fowler
backrest down to the desired position (0°, 25°, 40°, and 55°) (
Product illustration (page 6)).
RRaaiissiinngg oorr lloowweerriinngg tthhee ppnneeuummaattiicc FFoowwlleerr bbaacckkrreesstt
WWAARRNNIINNGG -- Always position the patient in the center of the product.
To raise the Fowler backrest, lift up the pneumatic head section activation lever (O), raise the Fowler backrest (A) to the
desired position (0° - 50°), and release the pneumatic head section activation lever (
Product illustration (page 6)).
To lower the Fowler backrest, lift up the pneumatic head section activation lever (O), push down on the Fowler backrest (A)
to the desired position (0° - 50°), and release the pneumatic head section activation lever (
Product illustration (page 6)).
RRaaiissiinngg oorr lloowweerriinngg tthhee ffoooott sseeccttiioonn
WWAARRNNIINNGG
• Always position the patient in the center of the product.
• Always make sure that the foot section support arm is secure in the arm supports before you release the Fowler or foot
section.
To raise the foot section, lift up the foot section (G) until the foot section support arm (I) is secure in the desired position (6°
and 12°) (
Product illustration (page 6)).
To lower the foot section, lift up the foot section (G) to release the foot section support arm (I) and lower the foot section
down to the desired position (0°, 6°, and 12°) (
Product illustration (page 6)).
RRaaiissiinngg tthhee ssiiddeerraaiill
WWAARRNNIINNGG
• Always put the product in the lowest position with the siderails up and latched and access doors closed and locked when
you leave a patient unattended on the product. Do not leave the product at a higher height.
• Always lock the siderails in the full up position with the sleep surface flat and in the lowest position when you transport a
patient.
• Always keep operator and patient limbs away from the siderails when you raise or lower the siderail.
To raise the siderail/endrail:
1. Use two hands to grasp the siderail.
2. Lift the siderail until the siderail is secure in the desired position (9 in., 14 in., and 26 in.).
3. Pull on the siderail to make sure that the siderail is latched and the arrow pointers (A) are aligned (Figure 5).
EN 12 1900-009-005 Rev AA.0

A
FFiigguurree 55 –– SSiiddeerraaiill aarrrrooww ppooiinntteerrss
LLoowweerriinngg tthhee ssiiddeerraaiill
WWAARRNNIINNGG
• Always put the product in the lowest position with the siderails up and latched and access doors closed and locked when
you leave a patient unattended on the product. Do not leave the product at a higher height.
• Always lock the siderails in the full up position with the sleep surface flat and in the lowest position when you transport a
patient.
• Always keep operator and patient limbs away from the siderails when you raise or lower the siderail.
To lower the siderail/endrail:
1. Grasp the siderail activation handle (B), press the activation trigger, and turn the handle left or right (Figure 6).
B
FFiigguurree 66 –– SSiiddeerraaiill aaccttiivvaattiioonn hhaannddllee
2. Lower the siderail until the siderail is at the desired position (9 in., 14 in., and 26 in.) and release the siderail activation
handle.
NNoottee
• Siderails automatically stop at the 9 in. position when you lower the siderails.
• The double safety lock at the 9 in. position may not be present on all products.
3. Pull on the siderail to make sure that the siderail is latched and the arrow pointers (A) are aligned (Figure 5).
1900-009-005 Rev AA.0 13 EN

OOppeenniinngg tthhee aacccceessss ddoooorrss ooppttiioonn
To open the access doors, squeeze the release knobs (A) (Figure 7).
NNoottee -- The open/close indicators (B) will show yellow when the door is released from the lock (Figure 8).
A
FFiigguurree 77 –– AAcccceessss ddoooorr
B
FFiigguurree 88 –– OOppeenn//cclloossee iinnddiiccaattoorrss
CClloossiinngg tthhee aacccceessss ddoooorrss ooppttiioonn
WWAARRNNIINNGG -- Always make sure that the open/close indicators show green when the door is closed.
To close the access doors, return the doors to the closed position.
NNoottee -- The open/close indicators (B) will show green when the door is locked in the closed position (Figure 8).
SSccaallee ccoonnttrrooll ppaanneell ooppttiioonn
CCAAUUTTIIOONN
• Do not lean on the bracket of the scale module.
• Do not use a foot end fixed IV pole on a product with the scale option.
EN 14 1900-009-005 Rev AA.0

A B C
D E F
ADisplay Displays patient weight or error messages
Blb/kg Changes the unit of measurement
C Zero Sets the scale to zero and erases the previous memory
DChange equipment Adds or removes equipment without affecting patient weight
EWeigh/On Activates the scale
FMemory Stores the most recent patient weight or displays the stored weight
WWeeiigghhiinngg aa ppaattiieenntt
CCAAUUTTIIOONN
• Always remove external equipment from the product litter when you zero the scale or weigh a patient.
• Always zero the scale at least once a week to maintain scale accuracy.
To weigh a patient:
1. Press and release the WWeeiigghh//OOnn button (E) to turn the scale on (
Scale control panel option (page 14)).
NNoottee -- Three dashes will flash on the display for 10 seconds followed by a weight reading.
2. Press and hold the ZZeerroo button (C) for two seconds (
Scale control panel option (page 14)).
NNoottee -- Patient must be moved from product to zero the scale.
3. Release the ZZeerroo button and wait for a zero weight to display.
4. Place the patient on the product and press and release the WWeeiigghh//OOnn button. Three dashes will flash on the display for
10 seconds followed by the patient weight.
NNoottee -- The
icon may display when using the scale and indicates the product is unstable and unable to weigh.
Stabilize the product and repeat the process.
1900-009-005 Rev AA.0 15 EN

SSeettttiinngg tthhee ssccaallee mmeemmoorryy
To set the scale memory:
1. Press and release the WWeeiigghh//OOnn button (E) to turn the scale on (
Scale control panel option (page 14)).
NNoottee -- Three dashes will flash on the display for 10 seconds followed by a weight reading.
2. Press and hold the MMeemmoorryy button (F) (
Scale control panel option (page 14)).
3. Release the MMeemmoorryy button when MMeemmoorryy appears on the display.
To display the stored weight, press the WWeeiigghh//OOnn button and immediately press the MMeemmoorryy button. Press the WWeeiigghh//OOnn
button again to leave MMeemmoorryy mode.
ZZeerrooiinngg tthhee ssccaallee
CCAAUUTTIIOONN -- Always remove external equipment from the product litter when you zero the scale or weigh a patient.
To zero the scale:
1. Press and release the WWeeiigghh//OOnn button (E) to turn the scale on (
Scale control panel option (page 14)).
NNoottee -- Three dashes will flash on the display for 10 seconds followed by a weight reading.
2. Press and hold the ZZeerroo button (C) for two seconds (
Scale control panel option (page 14)).
NNoottee -- To zero the memory only, press and hold the ZZeerroo button and MMeemmoorryy button at the same time for two seconds.
CChhaannggiinngg eeqquuiippmmeenntt
To add or remove equipment:
1. Press and release the WWeeiigghh//OOnn button (E) to turn the scale on (
Scale control panel option (page 14)).
NNoottee -- Three dashes will flash on the display for 10 seconds followed by a weight reading.
2. Press and release the CChhaannggee EEqquuiipp.. button (D) (
Scale control panel option (page 14)).
NNoottee -- The CChhaannggee EEqquuiippmmeenntt message will appear on the display after 10 seconds.
3. Add or remove equipment or devices from the product.
4. Press and release the CChhaannggee EEqquuiipp.. button.
NNoottee -- If the procedure takes longer than three minutes, the scale will shut off and the steps will need to be repeated.
CChhaannggiinngg tthhee ssccaallee uunniittss
To change the scale units:
1. Press and release the WWeeiigghh//OOnn button (E) to turn the scale on (
Scale control panel option (page 14)).
NNoottee -- Three dashes will flash on the display for 10 seconds followed by a weight reading.
2. Press and release the llbb//kkgg button (B) to change the scale units between pounds (lb) and kilograms (kg) (
Scale control
panel option
(page 14)).
NNoottee -- Press and hold the llbb//kkgg button and MMeemmoorryy button at the same time for two seconds to deactivate the lb/kg
function. Repeat the process to reactivate the lb/kg function.
RReeppllaacciinngg tthhee ssccaallee bbaatttteerriieess
CCAAUUTTIIOONN
• Always use 1.5 VDC alkaline batteries.
EN 16 1900-009-005 Rev AA.0