Stryker Secure 3000 User manual

Modular Patient System (MPS) 3000 Bed
MAINTENANCE MANUAL
For Parts or Technical Assistance
1–800–327–0770
IMPORTANT
File in your
maintenance
records

Table of Contents
CHAPTER ONE –INTRODUCTION
S1.1 Bed Specifications 9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S1.2 Safety 9, 10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S1.3 Warranty 11, 12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S1.4 Recommended Parts Kits 13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S1.5 Replacement Parts Kits 14, 15. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S1.6 Cleaning 16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S1.7 Preventative Maintenance 17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CHAPTER TWO –MPS OPERATIONS
S2.1 Set–Up Procedures 18. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S2.2 Bed Illustration 19. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S2.3 Base Operation Guide
Brake Pedal Operation 20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Steer Pedal Operation 20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S2.4 Litter Operation Guide
CPR Emergency Release Usage 21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Foley Bag Hooks Usage 21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Foot Prop Usage 21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fracture Frame Usage 21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
I.V. Poles 22. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Night Light Usage (optional equipment) 23. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Patient Restraint Strap Locations 23. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S2.5 Foot Board/Head Board Operation Guide
Chart Rack Usage (optional equipment) 24. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CPR Board Usage (optional equipment) 24. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Foot Board Control Panel Guide 25, 26. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
LED Display Panel Guide 27. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S2.6 Siderail Operation Guide
Positioning Siderails 28. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Siderail Control Panel Lights 28. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Inside Siderail Function Guide 29. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Outside Siderail Function Guide 30. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S2.7 Weigh System Operation Guide (optional equipment)
Weigh System Usage 31, 32. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Weigh System Control Panel Guide 33, 34. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S2.8 System Operation Guide
Bed Exit System Usage (optional equipment) 35. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dynamic Mattress System Usage (optional equipment) 35. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Function Lockout System Usage 35. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Table of Contents
 CHAPTER THREE –TROUBLESHOOTING
S3.1 Mechanical Troubleshooting
Brakes engage at one end and release at the other when pedal is activated 36. . . . . . . . . . . . . . . . .
Brakes do not engage/release 36. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Steer Wheel does not engage/release 36. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Siderail release latch does not engage/disengage 36. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CPR release does not disengage 36. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S3.2 Motion interrupt does not stop the movement of the bed 37. . . . . . . . . . . . . . . .
S3.3 Trendelenberg/Reverse Trendelenberg does not position properly 38. . . . .
S3.4 Bed does not raise/lower electrically 39, 40. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S3.5 Knee Gatch does not raise/lower electrically 41, 42. . . . . . . . . . . . . . . . . . . . . . . . . .
S3.6 Fowler does not raise/lower electrically 43, 44. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S3.7 Siderail lockout controls will not activate/deactivate 45. . . . . . . . . . . . . . . . . . . . .
S3.8 Siderail control lights do not turn on/off 46, 47. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S3.9 Bed Motion lock does not prevent bed motion 48. . . . . . . . . . . . . . . . . . . . . . . . . . . .
S3.9 Bed Motion lock LED does not light 48. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S3.10 Nurse call LED does not light 49. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S3.10 Nurse Call LED lights but Nurse Call does not activate 50. . . . . . . . . . . . . . . . .
S3.10 Nurse call acknowledgement LED does not light 50, 51. . . . . . . . . . . . . . . . . . . .
S3.11 TV/Radio does not turn on from siderail 52. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S3.12 Volume control button does not work 53, 54. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S3.12 Speaker volume not adequate 54. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S3.13 Room/Reading light control does not work 55. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S3.14 Bed Exit works but light does not illuminate 56. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S3.14 Bed Exit alarm does not sound when patient leaves bed 56. . . . . . . . . . . . . . .
S3.14 Bed Exit lights indicate activation –beeper does not sound 57. . . . . . . . . . .
S3.14 Bed Exit arms then disarms itself 57. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S3.15 Weigh System display will not turn on 58. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S3.15 Weigh System not weighing accurately 58. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S3.15 Weigh System functions do not work individually 59. . . . . . . . . . . . . . . . . . . . . .
S3.16 Dynamic Mattress System does not work 60. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S3.16 Dynamic Mattress air loss light comes on 61. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S3.16 DMS firm or soft won’t adjust; rest of system functions properly 61. . . . .
S3.16 DMS auto/manual won’t change; rest of system functions properly 61. .
S3.17 Power On indicator does not light 62. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S3.18 Brake Not Set indicator does not flash 63. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S3.18 One or two Brake Not indicators not flashing when brake is set 64. . . . . . .
S3.19 Night Light does not light 65. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S3.20 No Power at 110V Option Receptacle 66. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Table of Contents
CHAPTER FOUR –MAINTENANCE PROCEDURES –BASE
S4.1 Base Cover Removal
Upper Lift Unit Cover 67. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lower Lift Unit Cover 67. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lowering Bellows 68. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S4.2 Brake System
Brake Ring (Pan) Assembly Removal 69, 70. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Brake Pedal Replacement 71. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Brake Cam Replacement 71. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Brake Sensor Replacement 72. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S4.3 Steer Wheel Cable Replacement/Adjustment 73–75. . . . . . . . . . . . . . . . . . . . . . . . . .
S4.4 Caster Replacement 76. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S4.5 Lift Motor and Capacitor Replacement 77. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S4.6 Lift Unit
Lift Motor Isolation Plate Replacement 79, 80. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lift Housing Removal and Replacement 81, 82. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lift Gear Replacement 83. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lift Drive Inner Screw and Upper Nut Replacement 84. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lift Drive Outer Screw and Lower Nut Replacement 84. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Timing of Inner and Outer Drive Screws 84. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Illustrations for Lift Unit Procedures 85, 86. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lift Motor Coupler Replacement 87, 88. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lift Potentiometer Adjustment/Replacement 89, 90. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Power and Sensor Coil Cord Replacement 91, 92. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CHAPTER FIVE –MAINTENANCE PROCEDURES –LITTER
S5.1 Removal of Litter Access Panels 93, 94. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S5.2 Removal of Motion Interrupt Panel 95. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S5.3 Motion Interrupt Switch Replacement 96. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S5.4 Knee Section
Knee Motor Limit Setting 97. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cam and Cam Guide Replacement (Knee and Head Motor) 98. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Knee Motor Drive Screw and Nut Replacement 99, 100. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Knee Motor Assembly Replacement 101. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S5.5 Head Section
Cam and Cam Guide Replacement (Head and Knee Motor) 98. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Head Motor Limit Setting 102. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Head Motor Removal and Replacement 103, 104. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Head Motor Drive Isolator and Decoupler Replacement 105. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Head Motor Drive Screw and Ball Nut Replacement 107, 108. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Table of Contents
CHAPTER FIVE –MAINTENANCE PROCEDURES –LITTER (CONTINUED)
S5.6 CPR
CPR Release Cable Adjustment/Replacement 109. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CPR Handle Assembly Replacement 109. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CPR Illustrations 110, 111. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Litter Assembly, 110V Option 157. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S5.7 Weigh System Diagnostics and Repairs (Optional Equipment)
Weigh Diagnostic Procedure 112, 113. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Load Cell Replacement 114. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Weigh CPU Board Replacement 115. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S5.8 Litter CPU Board Replacement 115. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S5.9 Power Cord Replacement 116. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S5.10 Litter Grease Points 116. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CHAPTER SIX –MAINTENANCE PROCEDURES –SIDERAILS
S6.1 Head and Foot End Siderail
Siderail Cover Removal 117. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Molded Rail Replacement 118. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Siderail Latch Positioning Mechanism Replacement 119, 120. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Siderail Cable Replacement 121, 122. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Siderail Assembly Removal 123, 124. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Siderail Module Replacement 125. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CHAPTER SEVEN –MAINTENANCE PROCEDURES –FOOT BOARD
S7.1 Foot Board
Foot Board Hinge Removal 126. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Foot Board Module Replacement 126. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Foot Board Interface Board Replacement 127. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Foot Board Interface Plug Replacement 128. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
APPENDIX A –ASSEMBLY DRAWINGS AND PARTS LISTS
SA.1 Base Drawings
Base Assembly 129–134. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lift Assembly, Common 135, 136. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lift Assembly, Head End 137. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lift Assembly, Foot End 137. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Brake Assembly, Head 138. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Brake Assembly, Foot 139, 140. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SA.2 Litter Drawings
Litter Assembly, Mechanical 141–144. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Litter Assembly, Electrical 145, 146. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Litter Cover Assembly 147, 148. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Litter Assembly 149–151. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Litter Assembly, Removable I.V. Pole Option 152. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Litter Assembly, Scale and/or Bed Exit Option 153, 154. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Table of Contents
APPENDIX A –ASSEMBLY DRAWINGS AND PARTS LISTS (CONTINUED)
SA.2 Litter Drawings (Continued)
Litter Assembly, DMS Option 155. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mattress Assembly, DMS Option 154.1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hybrid Dynamic Mattress Litter Assembly 154.2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hybrid Dynamic Mattress Assembly 154.3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Litter Assembly, 90Power Cord Option 154.4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Litter Assembly, Night Light Option 155. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Litter Assembly, Headwall IFC/Nurse Call/Bed Exit 156. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Litter Assembly, Pendant Port 157.1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Litter Assembly, Coil Cord Option 157.2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Litter Assembly, Bed Exit Option 157.3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Litter Accessory Adapter Frame Option Assembly 157.4, 157.5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 Litter Roller Option Assembly 157.6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 Litter Roller Assembly 157.7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 Litter Telephone Option Assembly 157.8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 Phone Base Assembly 157.9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 Fowler Limit Switch Assembly 157.10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Gatch Drive Assembly 158, 159. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fowler/CPR Drive Assembly 160, 161. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Limit Switch Assembly 162. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Foot Lift Header Assembly 163. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Foot Lift Header Assembly, Option 164. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Head Lift Header Assembly 165. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Head Lift Header Assembly, Option 166. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CPR Release Assembly 167. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CPR Handle Assembly 167.1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Translation Cable Assembly 168. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Litter Foot/Prop Assembly 169. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Removable I.V. Pole Assembly 170. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Permanent I.V. Pole Assembly 171. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Permanent I.V. Pole Mounting Assembly, Head End 172. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Permanent I.V. Pole Mounting Assembly, Foot End 173. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SA.3 Siderail Drawings
Head, Left Siderail 174, 175. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Head, Right Siderail 176, 177. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Foot, Left Siderail 178, 179. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Foot, Right Siderail 180, 181. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Siderail Motion Module Assemblies 182. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Siderail Lights Module Assemblies 183. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Siderail Nurse Call Module Assemblies 184, 185. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Siderail TV/Radio Module Assemblies 186. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Siderail DMS Module Assemblies 187. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Table of Contents
APPENDIX A –ASSEMBLY DRAWINGS AND PARTS LISTS (CONTINUED)
SA.4 Head and Foot Board Drawings
Head Board Assembly 188. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CPR Board Assembly 189. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Foot Board Assembly 190, 191. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chart Holder Assembly 191.1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tape Switch Bed Exit Module Assembly 191.2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Foot Board Standard Module Assembly 192. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Foot Board Gatch/Fowler Module Assembly 193. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Foot Board DMS Module Assembly 194. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Foot Board Scale Module Assembly 195. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Foot Board Bed Exit Module Assembly 196. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SA.5 Overall Bed Assembly Drawing 197, 198. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
APPENDIX B –CIRCUIT BOARD LOCATIONS, BED WIRING DIAGRAMS
All board schematics are available, upon request, through Stryker Customer Service.
SB.1 Circuit Board Locations, Individual Board Drawings
Board Location Diagrams 199–202. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Individual Board Drawings 203–209. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SB.2 Wiring Diagrams
Bed, Siderail & Footboard Wiring Diagrams 210–218. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bed Wiring Block Diagram –Fully Loaded Bed 219–225. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SB.3 Voltage Charts 226–229. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Chapter One –Introduction
8
DIRECTOR OF MAINTENANCE AND ENGINEERING
Thank you for your recent purchase of Stryker equipment. We believe that Stryker products are the
best designed, best manufactured, and best supported products on the market and we want you to
share this belief.
Attached is our MPS Service Manual with a recommended spare parts list to assist you in the mainte-
nance of your new equipment. These are parts which our customers find convenient to have on hand
to facilitate maintenance and repairs. Parts damaged due to manufacturers defects in materials or
workmanship will be sent to you at no charge during the two year warranty period.
Stryker Customer Service is easily reached at (800) 327–0770. Our Customer Service Department
is staffed to facilitate replacement part orders, and we normally process and ship replacement parts
orders within twenty–four hours. Our goal, which we consistently achieve, is 95% of all replacement
parts orders shipped within two days or less.
In addition to facilitating your parts orders, our customer service representatives can answer your
technical and troubleshooting questions, and have ready access to our staff of technical profession-
als who can provide any level of phone support required.
Finally, your customer service representative can put you in contact with your local field service rep-
resentative. This is a Stryker employee, not a third party subcontractor, who is always available for
on–site consultations, in–services, or maintenance.
As you can see, we have structured our service to offer you exactly the support you need. We offer
any level of service required, from basic phone support to full preventative maintenance and service
agreements, allowing you to better utilize your staff.
Thank you again for ordering Stryker products, and please do not hesitate to call Stryker Customer
Service for further assistance.
Sincerely,
Joseph P. Briggs
Vice President – Stryker Service

Chapter One –Introduction
9
This manual is designed to assist you with the maintenance of the Modular Patient System (MPS) 3000 Bed.
Read it thoroughly before using the equipment. Keep the manual for future reference.
1.1 BED SPECIFICATIONS
Maximum Weight Capacity 500 pounds
Overall Bed Length/Width 93”/ 41–1/2”
Patient Sleep Surface 84”/ 35”
Minimum/Maximum Bed Height 15 3/8”/ 31”
Knee Gatch Angle 0to 40
Fowler Angle 0to 60
Trendelenberg/Reverse Trendelenberg –12to +12 
Weigh System Accuracy (optional equipment) + / –1% of total patient weight
Electrical Requirements –all electrical requirements
meet UL 544 specifications. 110 VAC, 60 Hz, 10.0 Amp
1.2 SAFETY
WARNING / CAUTION / NOTE DEFINITION
The words WARNING, CAUTION and NOTE carry special meanings and should be carefully reviewed.
WARNING
The personal safety of the patient or user may be involved. Disregarding this information could result in injury
to the patient or user.
CAUTION
These instructions point out special procedures or precautions that must be followed to avoid damaging the
equipment.
NOTE
This provides special information to make important instructions clearer.

Chapter One –Introduction
10
1.2 SAFETY (CONTINUED)
STATIC DISCHARGE PRECAUTIONS
The electronic circuits in the 3000 are completely protected from static electricity damage only while the bed
is assembled. It is extremely important that all service personnel always use adequate static protection when
servicing the electronic systems of the 3000. Whenever you are touching wires, you should be using static
protection.
Static Protection Equipment
The necessary equipment for proper static protection is:
1 static wrist strap; 3M part number 2214 or equivalent,
1 grounding plug; 3M part number 61038 or equivalent,
1 test lead with a banana plug on one end and an alligator clip on the other; Smith part number
N132B699 or equivalent.
CAUTION
All electronic service parts will be shipped in static shielding bags. Do not open the bags until you have com-
pleted steps 2 and 3 of the following procedure. Do not place unprotected circuit boards on the floor. All circuit
boards to be returned to Stryker Medical should be shipped in the static shielding bags the new boards were
shipped in.
Static Protection Procedure
1. Unplug the power cord from the wall receptacle.
2. Insert the grounding plug into a properly grounded hospital grade wall receptacle. Plug the banana plug
of the test lead into the receptacle on the grounding plug. Connect the alligator clip on the other end of
the test lead to a ground point on the bed.
3. Place the static control wrist strap on your wrist. Connect the alligator clip at the other end of the wrist strap
cord to a ground point on the bed.
BED
GROUNDING DIAGRAM

Chapter One –Introduction
11
1.3 WARRANTY
Limited Warranty:
Stryker Patient Care Division, a division of Stryker Corporation, warrants to the original purchaser that the
MPS 3000 Bed should be free from defects in material and workmanship for a period of two (2) years after
date of delivery. Stryker’s obligation under this warranty is expressly limited to supplying replacement parts
for, or replacing, at its option, any product which is, in the sole discretion of Stryker, found to be defective.
Stryker warrants to the original purchaser that the frame and welds on its beds will be free from structural
defects for as long as the original purchaser owns the bed. If requested by Stryker, products or parts for which
a warranty claim is made shall be returned prepaid to Stryker’s factory. Any improper use or any alteration
or repair by others in such manner as in Stryker’s judgement affects the product materially and adversely shall
void this warranty. No employee or representative of Stryker is authorized to change this warranty in any way.
This statement constitutes Stryker’s entire warranty with respect to the aforesaid equipment. STRYKER
MAKES NO OTHER WARRANTY OR REPRESENTATION, EITHER EXPRESSED OR IMPLIED, EXCEPT
AS SET FORTH HEREIN. THERE IS NO WARRANTY OF MERCHANTABILITY AND THERE ARE NO
WARRANTIES OF FITNESS FOR ANY PARTICULAR PURPOSE. IN NO EVENT SHALL STRYKER BE
LIABLE HEREUNDER FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM OR IN ANY
MANNER RELATED TO SALES OR USE OF ANY SUCH EQUIPMENT.
To Obtain Parts and Service:
Stryker products are supported by a nationwide network of dedicated Stryker Field Service Representatives.
These representatives are factory trained, available locally, and carry a substantial spare parts inventory to
minimize repair time. Simply call your local representative, or call Stryker Customer Service at (800)
327–0770.
Supplemental Warranty Coverage:
Stryker has developed a comprehensive program of extended warranty options designed to keep your equip-
ment operating at peak performance at the same time it eliminates unexpected costs. We recommend that
these programs be activated before the expiration of the new product warranty to eliminate the potential of
additional equipment upgrade charges. Stryker offers the following Supplemental Warranties:
Extended (Parts and Labor)
All replacement parts (excluding mattresses and consumable items)
Labor and travel for all scheduled and unscheduled calls
Biannual Preventative Maintenance Inspections and repairs
JCAHO paperwork for preventative maintenance
Priority Emergency Service
Standard (Labor Only):
Labor and travel for all scheduled and unscheduled calls
Biannual Preventative Maintenance Inspections and repairs
JCAHO paperwork for preventative maintenance
Priority Emergency Service
Basic (Parts Only):
All replacement parts (excluding mattresses and consumable items)
Priority Emergency Service
Please call your local representative, or call (800) 327–0770 for further information

Chapter One –Introduction
12
1.3 WARRANTY (CONTINUED)
Return Authorization:
Merchandise cannot be returned without approval from the Stryker Customer Service Department. An autho-
rization number will be provided which must be printed on the returned merchandise. Stryker reserves the
right to charge shipping and restocking fees on returned items.
SPECIAL, MODIFIED, OR DISCONTINUED ITEMS NOT SUBJECT TO RETURN.
Damaged Merchandise:
ICC Regulations require that claims for damaged merchandise must be made with the carrier within fifteen
(15) days of receipt of merchandise. DO NOT ACCEPT DAMAGED SHIPMENTS UNLESS SUCH DAMAGE
IS NOTED ON THE DELIVERY RECEIPT AT THE TIME OF RECEIPT. Stryker Customer Service must be
notified immediately. Stryker will aid the customer in filing a freight claim with the appropriate carrier for dam-
ages incurred. Claim will be limited in amount to the actual replacement cost. In the event that this information
is not received by Stryker within the fifteen (15) day period following the delivery of the merchandise, or the
damage was not noted on the delivery receipt at the time of receipt, the customer will be responsible for pay-
ment of the original invoice in full.
Claims for any short shipment must be made within thirty (30) days of invoice.

Chapter One –Introduction
13
1.4 RECOMMENDED PARTS KITS
MPS 3000 STARTER PACKAGE
Sensor Coil Cord Kit p/n 3000–200–741
Power Coil Cord Kit p/n 3000–200–743
Power Cord Kit p/n 3000–300–737
Lift Motor Kit p/n 3000–200–727
Fowler Motor Kit (includes clutch) p/n 3000–300–703
Gatch Motor Kit p/n 3000–300–711
Load Cell Kit (optional equipment) p/n 3000–307–701
Weigh CPU (optional equipment) p/n 3000–307–959
Caster Assembly p/n 3000–200–30 and 3000–200–16 (steer)
Main CPU Board Assembly p/n 3000–300–941
Junction Power Board Assembly p/n 3000–300–961
Interface Board Assembly p/n 3000–303–933
Lift Potentiometer Kit (Head) p/n 3000–200–929
Lift Potentiometer Kit (Foot) p/n 3000–200–731
Single Tube of Grease p/n 3000–200–700
Hardware Kit (reference p/n below)
MPS 3000 HARDWARE KIT –P/N 3000–000–700
Fuses (Variety)
Cover Fasteners (Variety) –siderails, bellows, lift covers, litter access, inner
shield
Snap Rings (Variety)
Sheet Metal Screws (Variety)
Cable Clamps (Variety)
Roll Pins (Variety)
Cotter Pins (Variety)
Steer Cable Retainer with Set Screw
Brake Pedal Bolt
Siderail Module Screws
Push Retaining Ring
Micro Switch (motion interrupt, brake)

Chapter One –Introduction
14
1.5 REPLACEMENT PARTS KITS
BASE KITS
1. Steer Cable Kit –p/n 3000–200–701
2. Complete Lift Assembly Kit –p/n 3000–200–705
3. Idler Gear Kit –p/n 3000–200–707
4. Manual Idler Gear Kit –p/n 3000–200–709
5. Motor Pinion Gear Kit –p/n 3000–200–711
6. Outer Screw Kit –p/n 3000–200–713
7. Inner Screw Kit –p/n 3000–200–715
8. Single Tube of Grease –p/n 3000–200–700
9. Lift Motor Isolation Plate Kit –p/n 3000–200–723
10. Lift Motor Coupler Kit –p/n 3000–200–705
11. Lift Motor Kit –p/n 3000–200–727
12. Lift Potentiometer Kit (Head) –p/n 3000–200–729
13. Lift Potentiometer Kit (Foot) –p/n 3000–200–731
14. Brake Cam Kit –p/n 3000–200–733
15. Brake Sensor Switch Kit –p/n 3000–200–735
16. Brake Pedal Kit –p/n 3000–200–737
17. Steer Pedal Kit –p/n 3000–200–703
18. Upper Lift Cover Kit (Head) –p/n 3000–200–739
19. Upper Lift Cover Kit (Foot) –p/n 3000–200–749
20. Sensor Coil Cord Kit –p/n 3000–200–741
21. Power Coil Cord Kit –p/n 3000–200–743
22. Lift Capacitor Kit –p/n 3000–200–745
23. Lower Lift Cover Kit (Head or Foot) –p/n 3000–200–747
24. Manual Override Shaft Kit –p/n 3000–200–751
LITTER KITS
25. Load Cell Kit (Optional Equipment) –p/n 3000–307–701
26. Fowler Motor Kit (Includes Clutch) –p/n 3000–300–703
27. Fowler Decoupler/Isolator Kit –p/n 3000–300–705
28. Fowler Ball Screw Kit –p/n 3000–300–707
29. Fowler/Gatch Cam & Cam Guide Kit –p/n 3000–300–709
30. Gatch Motor Kit –p/n 3000–300–711
31. Gatch Coupler Kit –p/n 3000–300–713
32. Gatch Drive Screw Kit –p/n 3000–300–715
33. Translation Cable Kit –p/n 3000–300–717
34. CPR Handle Kit (Right) –p/n 3000–300–719
35. CPR Handle Kit (Left) –p/n 3000–300–739
36. Litter Electrical Cover #2 Kit –p/n 3000–300–721

Chapter One –Introduction
15
1.5 REPLACEMENT PARTS KITS (CONTINUED)
LITTER KITS (CONTINUED)
37. Litter Mid Cover #5 Kit –p/n 3000–300–723
38. Fowler Motor Cover #4 Kit –p/n 3000–300–725
39. Head End Litter Cover #3 Kit –p/n 3000–300–727
40. Foot End Litter Cover #1 Kit –p/n 3000–300–729
41. Fowler Capactior Kit –p/n 3000–300–731
42. Gatch Capacitor Kit –p/n 3000–300–733
43. Litter Hinge Cover Kit –p/n 3000–300–735
44. Power Cord Kit –p/n 3000–300–737
SIDERAIL KITS
45. Foot End Siderail Kit (Right) –p/n 3000–400–701
46. Foot End Siderail Kit (Left) –p/n 3000–400–703
47. Head End Siderail Kit (Right) –p/n 3000–400–705
48. Head End Siderail Kit (Left) –p/n 3000–400–707
49. Siderail Head/Knee Module Kit (Inside/Right) –p/n 3000–400–709
50. Siderail Head/Knee Module Kit (Inside/Left) –p/n 3000–400–711
51. Siderail Head/Knee Module Kit (Outside/Right) –p/n 3000–409–713
52. Siderail Head/Knee Module Kit (Outside/Left) –p/n 3000–409–715
53. Siderail Nurse Call Module Kit (Inside/Right) –p/n 3000–403–717
54. Siderail Nurse Call Module Kit (Inside/Left) –p/n 3000–403–719
55. Siderail Nurse Call Module Kit (Outside/Right) –p/n 3000–403–721
56. Siderail Nurse Call Module Kit (Outside/Left) –p/n 3000–403–723
57. Siderail TV/Radio Module Kit (Inside/Right) –p/n 3000–404–723
58. Siderail TV/Radio Module Kit (Inside/Left) –p/n 3000–404–725
59. Siderail Dynamic Mattress System Module Kit (Inside/Right) –p/n 3000–402–727
60. Siderail Dynamic Mattress System Module Kit (Inside/Left) –p/n 3000–402–729
61. Siderail Lights Module Kit (Inside/Right) –p/n 3000–406–731
62. Siderail Lights Module Kit (Inside/Left) –p/n 3000–406–733
63. Siderail Bed Up/Down Module Kit (Outside/Right) –p/n 3000–400–735
64. Siderail Bed Up/Down Module Kit (Outside/Left) –p/n 3000–400–737
FOOT BOARD KITS
65. Foot Board Bed Position/Lockout Module Kit –p/n 3000–500–701
66. Foot Board Head/Knee Module Kit –p/n 3000–501–703
67. Foot Board Bed Exit System Module Kit –p/n 3000–508–705
68. Foot Board Dynamic Mattress System Module Kit –p/n 3000–502–707
69. Foot Board Scale Module Kit –p/n 3000–507–709
70. Foot Board Lid Kit –p/n 3000–500–711
71. C–Bumper Kit (Foot or Head Board) –p/n 3000–500–713

Chapter One –Introduction
16
1.6 CLEANING
Hand wash all surfaces of the bed with warm water and mild detergent. Dry thoroughly.
CAUTION
Quaternary Germicidal Disinfectants, used as directed, and/or Chlorine Bleach products, typically 5.25% So-
dium Hypochlorite in dilutions ranging between 1 part bleach to 100 parts water, and 2 parts bleach to 100
parts water are not considered mild detergents. THESE PRODUCTS ARE CORROSIVE IN NATURE AND
MAY CAUSE DAMAGE TO YOUR BED IF USED IMPROPERLY. If these types of products are used to clean
Stryker patient care equipment, measures must be taken to insure the beds are wiped with clean water and
thoroughly dried following cleaning. Failure to properly rinse and dry the beds will leave a corrosive residue
on the surface of the bed, possibly causing premature corrosion of critical components. Failure to follow the
above directions when using these types of cleaners may void this product’s warranty.
CAUTION
Do not steam clean or hose off the MPS 3000 Bed. Do not immerse any part of the bed. Some of the internal
parts of the bed are electric and may be damaged by exposure to water.

Chapter One –Introduction
17
1.7 PREVENTATIVE MAINTENANCE
BIANNUAL CHECKLIST
All fasteners secure (reference all assembly prints)
All casters lock with brake pedal engaged
”Brake Not Set”LED (on foot board) blinks when brakes are not engaged
Locking steer caster engages and disengages properly
Siderails move, latch and stow properly
CPR release working properly
Foot prop intact and working properly
I.V. pole working properly
Foley bag hooks intact
Optional chart rack intact and working properly
Optional CPR board not cracked or damaged and stores properly
No cracks or splits in head and foot boards
No rips or cracks in mattress cover
All functions on head end siderails working properly (including LED’s)
All functions on footboard working properly (including LED’s)
Motion Interrupt switches working properly
Optional night light working properly
Power cord not frayed
No cables worn or pinched
All electrical connections tight
All grounds secure to the frame
Ground impedence not more than 100 milliohms
Current leakage not more than 100 microamps
Apply grease to litter grease points
Bed Serial No. ______________
______________
______________
______________
______________
______________
______________
______________
______________
______________

Chapter Two –MPS Operations
18
2.1 SET–UP PROCEDURES
It is important that the MPS 3000 Bed is working properly before it is put into service. The following list will
help assure that each part of the bed is tested.
Plug the bed into a properly grounded, hospital grade wall receptacle and assure the ”Power”LED
light at the foot end of the bed comes on.
WARNING
The 3000 is equipped with a hospital grade plug for protection against shock hazard. It must be plugged di-
rectly into a properly grounded three–prong receptacle. Grounding reliability can be achieved only when a
hospital grade receptacle is used.
Plug the optional interface cable into the 37 pin connector under the litter frame at the head end of
the bed, and into the ”Patient Station”, ”Head Wall”, ”Docker Station”, or equivalent (whichever ap-
plies).
Assure the siderails raise, lower and store smoothly and lock in the up and intermediate positions
(page 28).
Assure that all four casters lock when the brake pedal is engaged (page 20).
NOTE
Assure that the ”Brake Not Set”LEDs located on the outside of the head end siderails and on the foot board
control panel come on when the brakes are disengaged.
Run through each function on the foot end control panel to assure that each function is working prop-
erly (page 25 & 26).
Run through each function on both head end siderails to assure that each is working properly (page
29 & 30).
Activate the motion stop system to assure it is functioning properly: press and hold down the BED
DOWN key. As the bed lowers, lift up on each corner of the motion interrupt pan individually and as-
sure the downward motion stops each time. Release the pan and allow the downward motion to con-
tinue.
NOTE
The bed’s upward motion or other functions are not disrupted by the motion stop system.
If any problems are found during bed set–up, contact Stryker Customer Service at 800–327–0770.
Damaged Merchandise
ICC Regulations require that claims for damaged merchandise must be made with the carrier within fifteen
(15) days of receipt of merchandise. DO NOT ACCEPT DAMAGED SHIPMENTS UNLESS SUCH DAMAGE
IS NOTED ON THE DELIVERY RECEIPT AT THE TIME OF RECEIPT. Stryker Customer Service must be
notified immediately. Stryker will aid the customer in filing a freight claim with the appropriate carrier for dam-
ages incurred. Claim will be limited in amount to the actual replacement cost. In the event that this information
is not received by Stryker within the fifteen (15) day period following the delivery of the merchandise, or the
damage was not noted on the delivery receipt at the time of receipt, the customer will be responsible for pay-
ment of the original invoice in full.
Claims for any short shipment must be made within thirty (30) days of invoice.

Chapter Two –MPS Operations
19
2.2 BED ILLUSTRATION
Brake Pedal
CPR Release
HEAD END
Footboard
Handle
Siderail Release
Handle
FOOT END
Control
Panel
Steer
Pedal
Foley Bag Hooks
(Standard)
Motion
Interrupt
Pan
I.V. and
Fracture Frame
Mount
I.V. and
Fracture Frame
Mount
Chart
Rack
Foley Bag Hook
(Isolated)
Night
Light
(Optional Equip.)
(Optional Equip.)
PATIENT’S
RIGHT PATIENT’S
LEFT

Chapter Two –MPS Operations
20
2.3 BASE OPERATION GUIDE
BRAKE PEDAL OPERATION
WARNING
Before putting a patient on the bed, be sure the brakes are fully engaged. Failure to set the brakes may allow
the bed to move, causing patient injury.
To activate the brakes, push down once on the pedal
identified by the label at right (located at both sides of
the bed). To disengage, push down once.
NOTE
There are LED lights on the outside of the head end siderails and on the foot end control panel that will blink
when the brakes are not engaged only if the bed is plugged into a wall socket (see pages 27 & 30). The brakes
will still operate properly when the bed is not plugged in.
STEER PEDAL OPERATION
The purpose of the steer caster is to help guide the bed along a straight line and to help with pivoting at corners
when the bed is moved.
To activate the steer caster, move the pedal located
at the head end of the bed to your left as shown on
the label.
NOTE
For proper ”tracking”of the steer caster, push the bed approximately 10 feet to allow the wheels to face the
direction of travel before engaging the steer pedal. If this is not done, proper ”tracking”will not occur and the
bed will be difficult to steer.