StudioDesk RCWH01 User manual

The Desk You Deserve
ASSEMBLY MANUAL
RCWH01 Floor rack cabinet white
RCBL01 Floor rack cabinet black
NOTE: Please assemble on soft surface to avoid
scratches to the lacquer.
!
www.studiodesk.net

The Desk You Deserve
Thank you for making StudioDesk the desk of your choice!
Before starting on assembling your keyboard stand let’s get familiar with the parts you have received in your
package. Please match the corresponding numbers on this page with the drawings.
1. Left side panel
2. Right side panel.
3. Top panel
4. Bottom panels
Hardware
Wooden parts
Phillips Screwdriver
5
Rack rails 2 pcs
L
3
Wooden dowels 12 pcs
6
M6 Screws 20 pcs
7
4
Tools needed (Not included)
8
Metal brackets 4pcs
L
R
12

1
Step One
Install wooden dowels (6) into the
predefined holes as shown on
the illustration.
8
10
Connect side panels together with the bottom
panels with dowels as shown on the illustration.
2
Step Two
3
Step Three
Fix panels together with metal
Brackets (8) and M6 (7) screws.
www.studiodesk.net

4
Step Four
Step Five
8
If your rack rails didn’t come pre-installed
Install them on each side with M6 screws.
5
Connect two side panels with top panel
as described on the illustration.