StudioDesk HARMONY Series User manual

The Desk You Deserve
ASSEMBLY MANUAL
HARMONY Series
NOTE: In order to avoid injury or damages,
please do not try to assemble your desk alone.
Our furniture is massive and heavy and requires
at least t o people to carry out assembly.
Please assemble on soft surface to avoid
scratches to the lacquer.
!
.studiodesk.net
Video Assembly manual is also available.
Search for Harmony Assembly Video manual on the YouTube
or scan code.

The Desk You Deserve
Thank you for making StudioDesk your desk of choice!
Before beginning assembly of your desk, let’s get familiar ith the parts you have received in your package.
Please match the corresponding numbers on this page ith the dra ings.
1. Legs 2. Desk surface 3. Top shelf 4. Strengthening boards 5. Monitor shelf 7.Pull out 8. Rack dividers
Hardware
Parts
Phillips Scre driver
1
2
6
5
TOOLS needed
1
3
4
5
7
12
9
8
Metal brackets
18 pc
Wooden Do els
26 pcs
Confirmat
Scre s 7x50
6pcs
11
Cage nuts
16 pc
13
Rack rails 2U
8 pc
15 Shelf Bracket
2 pcs
16
Imbus rench
Optional
Cable management
3 x M6/12
3 x M6/18
6
M6 x 12 Scre
Silver 96 pcs
14
10
M6 x 16
Black 16 pcs
Cable inlay
8 pc WH or BL
17 Brackets for
Pull out 4 pcs
M6 x 16 pcs

1
Step One
Insert the Do els into the legs as sho n on the illustration
2
Step Two
Place Main desk surface on the do els
8
10
.studiodesk.net
3
Step Three
Fix main desk board ith Brackets and M6 scres

4
Step Four
Install strengthening boards as sho n on the illustration. Fix it ith brackets and M6 scre s
5
Step Five
Add second strengthening board to the structure
6
Step Six
Fix it ith Brackets and M6 Scre s
a b

Carefully add top shelf to the structure as
sho n on the illustration.
7
Step Seven
Install Rack dividers to the structure
ith do els.
8
Step Eight
8
Step Eight
Fix Rack dividers ith Confirmat scre s from the
bottom.

9
Step Nine
Fix all the boards to the leg ith Brackets
and M6 scre s.
10
Step Ten
Insert do els to the leg and close
the structure ith the second leg.
11
Step Eleven
Fix boards to the leg ith Brackets and
M6 Scre s

12
Step Twelfe
If you purchased Cable management
tray, this step is optional.
Install cable management tray using
Washers and M6 scre s.
13
Step Thirteen
Install Pull out brackets (17) and
fix pull out holders to it.
During this step you have to
Determine height of your keyboard
If your keyboard is higher then initial
Pull out holders, you are able to
adjust it in height at this step.
To this on both sides.
14
Step Fourteen
Turn desk in standing position
And install Rack rails (13)
using M6 scre s.
Do that on both sides.

15
Step Fifteen
Insert Pull out to the rails
carefully evenly from
the both sides. T o people
are needed for this step.
We recommend atching video
Assembly manual on our Youtube
Channel.
16
Step Sixteen
Install shelf brackets (15) to the monitor
Shelf ith M6 scre s.
17
Step Seventeen
Scre M6 scre s to the
desired height (one out of t o)
and install the Monitor shelf.
Install cable inlays (14) to all holes
on the desk. There is total of
8 of them.
CONGRATULATIONS YOUR NEW DESK IS READY!