studioduc indi full User manual

indi full bed
a how-to guide that won’t leave you in tears
ASSEMBLY INSTRUCTIONS

parenting is hard.
this is easy.
no really, it is.
MADE HERE™
MADE SAFE MADE SMART
MADE WELL™

want to watch this assembly IRL?
(acronym challenged? that means “in real life”.)
open the camera on your phone and place it over the
QR code below to see our NYC studio dream team do all
the heavy lifting (just kidding, there is none!)
or go to ducducnyc.com/pages/assembly-instructions

thank you for selecting a
studio duc product!

please check contents against the components list in these
instructions. also, please ensure there was no damage that may
have occurred in shipping.
if any components are missing or you find any damage, please
contact ducduc before continuing.
read all the instructions before use.
pay close attention to the safety warnings in these instructions.
a minimum of two people is required to safely assemble and
move the bed. do not attempt to move this bed alone—
dragging or sliding it across a floor may cause structural dam-
age.
MAINTENANCE:
please remember to securely tighten all bolts and fasteners, and
periodically check to make sure every component is properly
and securely in place and all bolts and fasteners are tight.
CLEANING:
do not scratch or chip the finish. do not use abrasive chemicals
for cleaning. clean with mild soap on a soft rag. rinse and dry
thoroughly. if you ever refinish this furniture, be sure to use only
a non-toxic finish specified for children’s furniture.
KEEP INSTRUCTIONS FOR FUTURE USE

J
hammer cap
E (x2)
bracket
F (x8)
JCB bolt (20mm)
G (x8)
5/16” locking washer
H (x8)
5/16” flat washer
I
allen key (4mm)
WHAT’S IN THE BOX:
A3
headboard back
C
footboard
A1
R headboard side
A2
L headboard side
B1
R side rail
B2
L side rail
B3
center support
D x3
mattress panel

WHAT YOU’LL NEED:
20 minutes
(or less)
2 people
plus a dog for moral support
(unless you’re a cat person)
household hammer or
rubber mallet
a soft surface to assemble on
(like a rug or some of the corrugate
box your piece arrived in)
phillips head screwdriver

lay R headboard side (A1) on floor with foot facing up as shown.
insert connectors on cleat of R side rail (B1) into holes on R headboard side (A1). push down
at the connection to lock into place.
2
1
still confused? scan this code to watch the assembly video!

place bracket (E) over top of the 4 holes at the connection of R headboard side (A1) and R
side rail (B1). secure into place using the allen key (I) to screw in hardware
(F, G, + H) as arranged in the picture.
3
still confused? scan this code to watch the assembly video!
I
F
G
H
E

repeat steps 1-3 to connect the L headboard side (A2) and the L side rail (B2)
4
lean assembled R side (A1 + A2) against a wall as shown
5
still confused? scan this code to watch the assembly video!

6apply hammer cap (J) to the head of a household hammer. have a friend hold headboard
back (A3) o the ground in order to line up the connectors on assembled R headboard
side (A1) with slots on headboard back (A3). use hammer with hammer cap (J) to tap
into place.
still confused? scan this code to watch the assembly video!

7insert remaining connectors on L headboard side (A2) into remaining slots on headboard
back (A3). tap into place.
still confused? scan this code to watch the assembly video!

8insert remaining connectors on L headboard side (A2) into remaining slots on headboard
back (A3). tap into place.
9insert connectors on both side rails (B1 + B2) and center support (B3) into slots on
footboard (C). tap into place.
still confused? scan this code to watch the assembly video!

10 with a friend, lift one mattress panel (D) and place on side rails (B1 + B2) so the
connectors on side rail cleats line up with holes on underside of mattress panel (D).
once connectors and holes are aligned, push down to lock into place. repeat until
all mattress panels (D) are secured into place.
still confused? scan this code to watch the assembly video!

awww yeah! you did it!
give yourself a pat on the back, take a bow,
or go house a pint of ice cream…we don’t judge.

prefer to talk to a human instead?
we’re here for you!
contact our customer advocate team below:
212.226.1868
live chat at
ducducnyc.com
200 lexington, no. 1201
ny, ny 10016
[e-mail]