studioduc juno twin bed User manual

juno twin bed
a how-to guide that won’t leave you in tears.
ASSEMBLY INSTRUCTIONS

parenting is hard
this is easy
no really, it is
MADE HERE™
MADE SAFE MADE SMART
MADE WELL™

want to watch this assembly IRL?
(acronym challenged? that means in real life)
open the camera on your phone and place it over the
QR code below to see our NYC studio dream team do all
the heavy lifting (just kidding, there is none!)
or go to ducducnyc.com/assembly-instructions

thank you for selecting a
studio duc product!

Please check contents against the components list in these instructions. Also, please
ensure there was no damage that may have occurred in shipping.
If any components are missing or you find any damage, please contact ducduc before
continuing.
A minimum of two people are required to safely assemble and move the bed. Do not
attempt to move this bed alone. Dragging or sliding it across floor may cause the sur-
face to scratch or structural damage.
Read all the instructions before use.
MAINTENANCE:
Please remember to securely tighten all connectors, and periodically check to make
sure every component is properly and securely in place.
CLEANING:
Do not scratch or chip the finish. Do not use abrasive chemicals for cleaning. Clean
with mild soap on a soft rag. Rinse and dry thoroughly. If you ever refinish this
furniture, be sure to use only a non-toxic finish specified for children’s furniture.
KEEP INSTRUCTIONS FOR FUTURE USE

WHAT’S IN THE BOX:
A
head board
C
foot board
B (x2)
side rail
D (x2)
mattress panel

WHAT YOU’LL NEED:
10 minutes
(or less)
2 people
plus a dog for moral support
(unless you’re a cat person)

1Lean A against the wall.
*duc insider tip*
Steps in this assembly will require parts to
be flat on the floor.
Assemble on a soft surface to prevent any
damage. Try a rug, a blanket, or even a
sheet of foam from the packaging!

Insert B connectors into slots on left side of A.2

Push B down to lock connectors into place.3

Repeat STEPS 2 + 3 to lock remaining part B into place.4

5Insert connectors on both parts B into slots on C.

Push both parts B down to lock connectors into place.6

Place both parts D so they rest on the supports of B.
7

ta-da! you did it!
give yourself a pat on the back, take a bow,
or go house a pint of ice cream…we don’t judge.

prefer to talk to a human instead?
we’re here for you!
contact our customer advocate team below
212.226.1868
live chat at
ducducnyc.com
200 lexington, no. 701
ny, ny 10016
[e-mail]