Style selections 47895 User manual

ITEM #0120957
MODEL #47895
1
MIRROR
Français p. 7
Español p. 14
Style Selections®is a registered trademark
of LF, LLC. All rights reserved.
Serial Number Purchase Date
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-877-888-8225, 8 a.m. - 8 p.m., EST, Monday - Friday.
ATTACH YOUR RECEIPT HERE
EB14123

PACKAGE CONTENTS
2
PART DESCRIPTION QUANTITY
A Mirror 1
A

3
HARDWARE CONTENTS (shown actual size)
AA
2 in. screw
Qty. 2
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install
the product.
• Two people are required for safe installation. Take extra precautionary measures to ensure a secure
grip on the mirror when lifting.
WARNING
CAUTION
• To maintain the beauty of the mirror nish, avoid placing the mirror in direct sunlight.
• Avoid exposing the mirror to extreme temperatures by installing away from heat and air vents.
• The bathroom wall must be nished prior to installation of the mirror.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents. If any part is missing or damaged, do not attempt to assemble
the product.
Estimated Assembly Time: 30 minutes
Tools Required for Assembly (not included): Tape Measure, Electric Drill with 2 in. Drill Bit, Level.
Helpful Tools (not included): Stud Finder, (2) Wall Anchors (if mounting mirror to wall).

ASSEMBLY INSTRUCTIONS
4
1
3
2
1. Determine the desired location for the mirror (A).
Mark the location of the mounting screws (AA)
on the wall, ensuring they are level. It is
recommended the mirror (A) be installed to
at least 1 wall stud. In order to locate wall studs,
you can use a stud nder (not included) or tap
along the wall until you nd a spot that sounds
solid. If you are unable to locate a wall stud, it is
recommended you use wall anchors (not
included) to secure the mirror (A).
AA
2. If using wall anchors: Using a drill (not included),
create a hole in the wall for each wall anchor
over the marked locations. Insert 2 wall anchors.
Insert (1) 2 in. screw (AA) into each wall anchor.
If installing directly into wall studs: Using a drill
(not included), insert (1) 2 in. screw (AA) into
each marked location.
3. Hang the mirror (A) on the screws (AA) using
the mounting hardware preassembled to the
mirror (A).
Hardware Used
2 in. screw x 2
AA
A
AA
A

CARE AND MAINTENANCE
5
• To maintain the beauty of the mirror nish, avoid placing the mirror in direct sunlight.
• Avoid exposing the mirror to extreme temperatures by installing away from heat and air vents.
• Dust frequently with a clean, soft and dry cloth.
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
Mirror is higher on
one side than the
other.
1. Mounting screws are not level.
2. Hanging hardware on the mirror
is not level.
1. Remove the mirror from the wall and
re-check the screws; adjust as
needed.
2. Measure the position of the hanging
hardware on the back of the mirror
and ensure that it is level, adjust as
needed.
WARRANTY
All products should be checked for defects or damages prior to installation and any defects or
damages should be notied to the manufacturer.
What This Warranty Covers:
The manufacturer warrants its products to be free from substantial defects in materials and
workmanship from the original date of purchase under normal home use. This warranty is offered only
to the original consumer purchaser and may not be transferred. The manufacturer is only responsible
for the actual purchase price.
How Long The Warranty Lasts:
Coverage for all vanity cabinets, xed vanities, drawer banks, bath storage cabinets, linen cabinets,
wall hutches, llers, toe kicks, medicine cabinets, mirrors, and accessories lasts from 3 years from
the original date of purchase. Coverage for all porcelain vanity tops lasts from 1 year from the original
date of purchase.
What The Manufacturer Will Do Under The Warranty:
During the warranty period, the manufacturer, at its option, will repair or replace any part or product
that proves to have substantial defects in materials or workmanship, or the manufacturer will provide
an equivalent replacement product. The manufacturer reserves the right to change specications in
design and materials without notice and with no obligation to replace products that were previously
manufactured.
Implied Warranties:
The manufacturer disclaims any implied warranty of merchantability, and there are no warranties that
extend beyond the descriptions on the face hereof.
Wood, Aging and Appearing in Printed Materials:
Because of the varying natural characteristics of wood and the effects of aging, product shown in

6
WARRANTY
REPLACEMENT PARTS LIST
For replacement parts, call our customer service department at 1-877-888-8225, 8 a.m. - 8 p.m., EST,
Monday - Friday.
PART DESCRIPTION PART #
AA 2 in. screw 47895-1
displays and/or printed materials (such as product photos printed in brochures, iers, catalogs, etc.)
will not be an exact match to the cabinetry you will receive. Depending on the wood characteristics,
the age of a sample and the environment of the showroom, samples will show some degree of
variation from new product. In addition, you should not expect all doors, drawer fronts, trim, or
moulding to match exactly in either nish or grain. Variation in wood is normal and unavoidable. In
addition, it is not possible to exactly match our colors in printed materials. Therefore, you should view
the actual samples when making your color selection.
What This Warranty Does Not Cover:
This warranty does not cover any problems or damage which result from improper transportation,
improper installation, mishandling, misuse, abuse, neglect, abnormal use, commercial use, improper
maintenance, unauthorized repairs, accidents, or acts of God, such as hurricanes, re, earthquakes
or oods. The warranty and any applicable implied warranties do not cover incidental or
consequential damages arising from any defects in the product such as labor charges for installation
or removal of the product or any associated products. The manufacturer is not responsible for any
installation charges. For all bath furniture: this warranty does not cover defects or damage caused by
normal wear and tear, alterations, environmental conditions, humidity absorption, or mold. In addition,
variations in wood grain, nish color, aging, or other natural wood stain characteristics are not
considered defects and are not covered by this warranty. For all porcelain vanity tops: this warranty
does not cover defects or damage caused by normal wear and tear, alterations, environmental
conditions, or misuse including placing sharp or abrasive objects on the vanity top surface, cleaning
the vanity top with abrasive tools or cleansers, dropping any large or heavy objects onto the vanity
top, or using water that exceeds a temperature of 140oFahrenheit/46oCelsius.
How to Obtain Warranty Service:
If you need replacement parts or would like to make a warranty claim, please contact our Customer
Service Representative by mail, email, fax, or telephone at the address, email or telephone/fax
number listed. All warranty claims must include the model number of the product, copy of the
original receipt, and the nature of the problem. In addition, the manufacturer may at its discretion
require inspection of the installation site, photography, or authorize the prepaid return of the claimed
defective part. Merchandise not pre-approved for return will not be accepted and the associated claim
not accepted. If upon inspection you nd your product is damaged or missing parts, it is not
necessary to return the unit to the store of purchase. Please contact customer service at
1-877-888-8225, 8 a.m. - 8 p.m., EST, Monday - Friday to obtain a replacement part.
Printed in India
Style Selections®is a registered trademark
of LF, LLC. All rights reserved.
AA

ARTICLE #0120957
MODÈLE #47895
7
MIROIR
Style Selections®est une marque de commerce
déposée de LF, LLC. Tous droits réservés.
Numéro de série Date d’achat
Des questions, des problèmes, des pièces manquantes? Avant de retourner l’article au
détaillant, appelez notre service à la clientèle au 1 877 888-8225, entre 8 h et 20 h (HNE),
du lundi au vendredi.
JOINDREZ LE REÇU ICI

8
CONTENU DE L’EMBALLAGE
PIÈCE DESCRIPTION QUANTITÉ
A Miroir 1
A

9
AA
Vis de 2 po
Qté : 2
QUINCAILLERIE INCLUSE (grandeur réelle)
CONSIGNES DE SÉCURITÉ
Assurez-vous de lire et de comprendre l’intégralité de ce manuel avant de tenter d’assembler,
d’utiliser ou d’installer le produit.
• Deux personnes sont nécessaires pour une installation en toute sécurité. Veillez à tenir fermement
le miroir lorsque vous le soulevez.
AVERTISSEMENT
MISE EN GARDE
• Pour conserver la beauté du ni du miroir, évitez de le placer directement sous la lumière du soleil.
• Évitez d’exposer le miroir à des températures extrêmes en l’éloignant des radiateurs, de la chaleur
ou des évents d’aération.
• Le mur de la salle de bains doit être terminé avant l’installation du miroir.
PRÉPARATION
Avant de commencer l’assemblage du produit, assurez-vous d’avoir toutes les pièces. Comparez les
pièces avec la liste du contenu de l’emballage et celle de la quincaillerie. S’il y a des pièces
manquantes ou endommagées, ne tentez pas d’assembler le produit.
Temps d’assemblage approximatif : 30 minutes
Outils nécessaires pour l’assemblage (non inclus) : ruban à mesurer, perceuse électrique avec
mèche de 2 po, niveau.
Outils utiles (non inclus) : détecteur de montant, 2 chevilles d’ancrage au mur (si le miroir n’est pas
xé à des montants de cloison).

10
1
3
2
AA
3. Accrochez le miroir (A) sur les vis (AA) à l’aide
de la quincaillerie de xation préassemblée au
miroir (A).
Quincaillerie utilisée
Vis de 2 po x 2
AA
INSTRUCTIONS POUR L’ASSEMBLAGE
1. Choisissez l’endroit où vous désirez installer le
miroir (A). Marquez l’emplacement des vis sur
le mur, en veillant à ce qu’ils soient au même
niveau. Il est recommandé de xer le miroir (A)
à au moins un montant de cloison. Pour repérer
les montants de cloison, utilisez un détecteur de
montant (non inclus) ou tapotez sur le mur
jusqu’à ce qu’il ne sonne plus creux. Si vous ne
parvenez pas à repérer un montant de cloison,
utilisez des chevilles d’ancrage (non incluses)
pour xer le miroir (A).
2. Si vous utilisez des chevilles d’ancrage : à l’aide
d’une perceuse (non incluse), percez un trou
dans le mur pour chaque cheville d’ancrage aux
endroits marqués. Insérez (2) chevilles d’ancrage.
Insérez (1) vis de 2 po (AA) dans chaque cheville
d’ancrage.
Si vous installez l’article directement dans les
montants de cloison : à l’aide d’une perceuse
(non incluse), insérez (1) vis de 2 po (AA) dans le
mur, à chaque endroit marqué.
A
AA
A