Summit SINC1110 User manual

0
Felix Storch, Inc.
SUMMITAppliance
770 Garrison Avenue
Bronx, NY 10474
USE AND CARE GUIDE
Induction Cooktop, Models
SINC1110
SINC2220
SINC424220
SINC430220
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT REMOVE TOP OR BOTTOM COVER.
NO USER-SERVICEABLE PARTS INSIDE.
INSTALLATION, REPAIR, AND REMOVAL SHOULD BE DONE BY
AUTHORIZED SERVICE PERSONNEL ONLY.
Before installation, record the model and serial number as
found on the back of your cooktop. If you require service or
call with a question, please have this information ready.
Model:____________________________________
Serial Number:______________________________

SUMMIT APPLIANCE Felix Storch, Inc.
1
Contents
Your SUMMIT Induction Cooktop ......................................................... 1
About Induction Cooking .............................................................. 1
Important Safety Instructions ...........................................................2 - 3
Installation ........................................................................................4 - 9
SINC1110..................................................................................... 5
SINC2220 .................................................................................... 6
SINC424220 ................................................................................ 7
SINC430220 ................................................................................ 8
Electrical Connections ................................................................. 9
How to Use Your Cooktop ............................................................ 10 - 11
Notes on Using Your Cooktop ............................................................. 11
Proper & Improper Cookware ............................................................. 12
Cleaning Your Cooktop ....................................................................... 13
Troubleshooting Guide ........................................................................ 14
Warranty Information ........................................................................... 15
Your SUMMIT®Induction Cooktop
Thank you for purchasing one of SUMMIT's induction cooktops. This
product is intended to provide you with many years of quality service.
Please read this manual in its entirety to maximize the lifespan and
performance of your appliance.
About Induction Cooking
When you turn on the power of your induction cooktop, coils inside
produce a magnetic field underneath the glass ceramic surface.
When the proper cookware is placed on top of a magnetized cooking
zone, the magnetic field sends currents into the cookware, causing
friction and generating instant heat inside your pot or pan.
We hope you enjoy the speed, efficiency, and safety of this
appliance.

Felix Storch, Inc. SUMMIT APPLIANCE
2
IMPORTANT SAFETY INSTRUCTIONS
Keep these instructions handy for future use. If lost, this manual is available from our
website at www.summitappliance.com
Read these instructions carefully before installation or operation of the appliance.
Failure to follow these warnings could result in a fire or explosion that causes property
damage, personal injury or death. To reduce the risk of fire, electric shock or injury, take
the following precautions:
Safety During Installation
This appliance must be installed by a qualified technician.
Have the professional installer show you the location of the circuit breaker or fuse.
Do not place the unit on or near a hot gas or electric burner or in a heated oven.
See INSTALLATION for additional safety requirements.
Intended Use
This appliance is for built-in household use only. Do not use outdoors or free-
standing.
Do not use the appliance to heat a room.
Cooking Safety
Do not allow aluminum foil, paper or cloth to come in contact with a hot zone.
Do not allow pans to boil dry or empty.
Never leave the cooktop unattended when in use.
Always use the proper pot and pan size. The use of undersized cookware will expose
a portion of the hot zone, which can result in ignition of clothing or personal burns.
Always remove the covers on sealed or canned goods before heating to avoid
explosion.
Do not touch hot surfaces. Use dry pot holders to hold the handles of pots and pans.
Close supervision is necessary when any appliance is used by or near children.
Cleaning Safety
When cleaning with a wet sponge or cloth, be careful to avoid burns from steam.
Do not clean the unit when it is still hot. Some cleaners may produce noxious fumes
when applied to a hot surface.
Condition of Unit
Do not operate any appliance with a damaged cord or plug.
Do not cook on a broken cooktop, as cleaning solutions and spills may penetrate the
break and create the risk of electric shock.

SUMMIT APPLIANCE Felix Storch, Inc.
3
Environment of Unit
To reduce the risk of fire, do not place any heating or cooking appliances beneath the
appliance.
To reduce the risk of fire, do not let any objects (glass, paper, etc.) obstruct the inlet
under your cooktop.
To reduce the risk of electric shock, do not mount unit over a sink.
To reduce the risk of fire, do not store anything directly on top of the appliance
surface when the appliance is in operation.
Always have a working smoke detector in or near the kitchen.
Do not leave lids or other metal objects on the cooktop. If the cooktop is turned on,
these objects can heat up quickly and may cause burns.
Do not place rough or uneven objects on the unit as they may damage the surface.
If the cooktop is near a window, ensure that curtains do not blow over or near the
unit.
Do not use the cooktop as a work surface. Certain substances such as salt, sugar, or
sand can scratch the glass ceramic surface.
Do not store hard or pointed objects over the cooktop as they can damage the unit if
they fall on top.
Do not put detergents or flammable materials in the equipment installed under the
cooktop.
Power Cord Safety
To protect against electric shock, do not immerse cord, plugs, or main body in water
or any other liquid.
Do not let cord hang over edge of table or counter.
Do not allow cord to touch hot surface.
A short power supply cord or detachable power supply cord should be used to
reduce the risk of becoming entangled in or tripping over a longer cord.
For SINC1110 only: This appliance has a polarized plug (one blade is wider
than the other). To reduce the risk of electric shock, this plug is intended to fit into
a polarized outlet only one way. If the plug does not fit fully into the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician. Do not
attempt to modify the plug in any way.
Service and Repair Safety
There are no user serviceable parts on this appliance. Only an authorized service
representative should attempt to service your cooktop.

Felix Storch, Inc. SUMMIT APPLIANCE
4
Installation
This appliance is not user serviceable. Installation must be completed by a
qualified professional.
Before Installation
Ensure that cooktop is turned OFF.
Record the model and serial numbers located on the rating plate on the
underside of the cooktop. You may need these numbers in case of
future repairs.
Cooktop Installation
1. Cut an opening in the counter surface. Refer to the drawings on the
following pages for appropriate dimension sizes and follow these
instructions:
Keep a minimum of 2 inches of space free around the opening.
Make sure the thickness of the counter surface is at least 1¼ inches.
Select heat-resistant table material to avoid damage caused by heat
radiation.
Ensure that the underside of the induction cooktop is well ventilated
and the air inlet is not blocked.
The distance between the hotplate and any cupboard above the
appliance should be at least 30 inches.
2. After cutting the opening, remove any shavings or other loose material
that may interfere with the appliance's operation.
3. Apply suitable waterproof sealant to secure the cooktop in place and to
prevent the influx of water, food, and other foreign substances.
4. Gently insert the cooktop into the cutout and secure.

SUMMIT APPLIANCE Felix Storch, Inc.
5
MODEL SINC1110
120V 60Hz
1800W

Felix Storch, Inc. SUMMIT APPLIANCE
6
MODEL SINC2220
220V 60Hz
3100W

SUMMIT APPLIANCE Felix Storch, Inc.
7
MODEL SINC424220
220V 60Hz
6800W

Felix Storch, Inc. SUMMIT APPLIANCE
8
MODEL SINC430220
220V 60Hz
6800W
FRONT
FRONT

SUMMIT APPLIANCE Felix Storch, Inc.
9
Electrical Connection
Note: This appliance must be installed in accordance with National
Electrical Codes, as well as all state, municipal and local codes. The
correct voltage, frequency, and amperage must be supplied to the
appliance from a dedicated grounded circuit which is protected by a
correctly sized circuit breaker or time delay fuse. Appliance voltage,
frequency, and amperage ratings are listed on the product rating
plate.
For the SINC1110, plug the cord into a grounded outlet.
For the SINC2220, SINC424220, and SINC430220 models, attach
the leads to a power supply.
Model Voltage Frequency Minimum Circuit
Breaker Amperage Total Watts
SINC1110 120 60 20 1800
SINC2220 220 60 15 3100
SINC424220 220 60 35 6800
SINC430220 220 60 35 6800
To test the connection:
1. Clear the surface of the cooktop.
2. Clean cooktop surface.
3. Turn on power supply.
4. Verify that the appliance is functioning properly.

Felix Storch, Inc. SUMMIT APPLIANCE
10
How to Use Your Cooktop
1. Getting Started
Before operating your induction cooktop, clean the surface (see
CLEANING YOUR COOKTOP for instructions) to remove any foreign
substances that may remain from packaging, shipping and installation.
Place usable cooking utensils in the center of the cooking zone and plug
the appliance in. The instruction power light will illuminate.
The following illustration shows a typical control panel for an induction
cooktop:
ON/OFF refers to the appliance power, while HEATING/TEMP and
TIMER refer to specific functions.
2. Heating
HEATING is the default function of the induction cooktop. When pressing
ON/OFF, the heating light will illuminate and the cooktop will heat the
cookware at 1200W. The heat can be adjusted by touching ▲and ▼.
There are ten levels of power, with 10 being the highest.
3. Temperature
When pressing TEMP, the induction cooktop will begin setting the
temperature and the TEMP light will illuminate. The default temperature
is 248ºF (120ºC). Temperature can be adjusted by touching the ▲and
▼buttons. Note that the temperature range is 140ºF to 464ºF (60ºC to
240ºC).

SUMMIT APPLIANCE Felix Storch, Inc.
11
4. Timer
When pressing TIMER, the light of the TIMER and one of the lights on
HEATING/TEMP will illuminate accordingly. The cooktop will enter the
Time Setting mode. The timer can be adjusted from 0 to 180 minutes for
model SINC1110 (and from 0 to 99 minutes for the other models) by
pressing ▲and ▼. Five seconds after setting, the window will
automatically shift to the mode display of the corresponding function.
To view the countdown time, press TIMER again. The display window
will show you the remaining time.
5. Lock
Models manufactured prior to 2009 include a child lock that prevents you
from changing the settings while the appliance is turned on. This child
lock does NOT prevent the appliance from being turned on.
Models manufactured in and after 2009 contain child locks that will
prevent the cooktop power from turning on when touched in locked
mode. To unlock, touch the LOCK key again.
Notes on Using Your Cooktop
This appliance will get hot during use and will remain hot for a time after
use.
For oil frying, use TEMP function.
Never heat empty cookware. This can damage both the cookware and
the appliance.
Remember to turn off cooktop after use. If left on, the ventilator will
continue to operate, causing a waste of energy.
Keep unit away from a gas range or other heat source. If the
surrounding temperature is too hot, the cooktop will stop heating.
Make sure to wipe off water from the bottom of the pot before heating.
Use caution when boiling water. During the boiling process, hot water
may splash out.

Felix Storch, Inc. SUMMIT APPLIANCE
12
Proper & Improper Cookware
The quality of your cooking is dependent on the cookware you use.
Because induction cooking requires a magnetic vessel for heating, only
certain materials can be used on your cooktop.
Proper Cookware
Flat-bottom pots or pans with diameter from 12 to 26 cm (4.7 to 10.83
inches) made from the following:
Magnetic stainless steel
Cast iron
Enameled iron
Nickel
Improper Cookware
Pots or pans with or made of the following CANNOT be used on your
cooktop:
Rounded-bottom
Bottom measuring less than 12 cm (4.7 inches)
Pot with stands
Heat resistant glass
Ceramic container
Copper
Aluminum
Non-magnetic stainless steel
If you are unsure about the usability of your cookware, simply
take a magnet (such as one on your refrigerator) and hold it
under the bottom of your pot or pan. If the magnet sticks, the
cookware CAN be used on the induction cooktop.

SUMMIT APPLIANCE Felix Storch, Inc.
13
Cleaning Your Cooktop
After each use, unplug or turn off the power and let your unit cool down
completely. When it is cool to the touch, apply approximately 1 teaspoon (5
ml) of nonabrasive cleaner to the surface of the ceramic glass with a lightly
dampened cloth. Use a second cloth to remove any remaining cleaner
residue. Wipe dry with a dry cloth.
Do NOT use the following to clean your unit:
Glass cleaners which contain ammonia or chlorine bleach as these
materials may stain the cooktop
Caustic cleaners that may etch the surface
Abrasive cleaners
Metal scouring pads and scrub sponges
Powdery cleaners containing chorine bleach
Flammable cleaners such as lighter fluid or WD-40
Note: Sugary products can damage the ceramic glass surface. If dry
sugar, sugar syrup, tomato products, or milk spills on the surface
DURING heating, clean immediately.

Felix Storch, Inc. SUMMIT APPLIANCE
14
Troubleshooting Guide
If you encounter the following error messages while using your cooktop,
check the guide below to see if you can correct the problem yourself before
calling for assistance:
Error Message Possible Causes Solution
E0
There is no pan on
the unit.
Pan is not induction-
capable.
Use an induction-
friendly pan (see
PROPER &
IMPROPER
COOKWARE).
E1
The temperature of
internal components
is too high.
There is a
temperature testing
circuit failure.
Clear/unblock
ventilation slots. Let
the device cool off for
a few minutes. If the
error message
remains on display
after the device has
cooled off, contact an
authorized repairman.
E2
The pan is empty.
The temperature of
the pan is too high.
There is a
temperature testing
circuit failure.
Check that the pan is
not empty.
Remove the
cookware from the
cooktop. Let the
device cool off for a
few minutes and try
again.
E3 The voltage is
unusual.
Let the device cool off
for a few minutes and
try again.
If your unit is still not functioning properly, call SUMMIT toll-free at 800-932-
4267 to speak with a representative.

SUMMIT APPLIANCE Felix Storch, Inc.
15
Warranty FELIX STORCH, INC.
770 Garrison Avenue
Bronx, NY 10474
718-893-3900
SUMMIT LIMITED WARRANTY
SUMMIT Appliances warrants this product to be free from defects in materials and workmanship
for a period of one year from the date of original purchase or delivery. Any parts determined to
be defective will be replaced by SUMMIT at no charge to you. Plastic parts, liners, and outer
cabinets are warranted to be manufactured to commercially acceptable standards and free from
defects at the time of delivery.
This limited warranty does not apply to:
1. Improper installation
2. Customer misuse, negligence or damage
3. Incorrect electrical current
4. Products with serial number altered or removed
5. Products sold or used outside the fifty United States or District of Columbia
6. Commercial or industrial users
7. Damage to this product from accidents, alterations, failure to follow instructions, fire,
floods, earthquakes, war, civil disturbance or Acts of God.
SUMMIT is not liable for consequential or incidental damage.
MAIL WARRANTY CARD TO:
Felix Storch, Inc.
SUMMIT APPLIANCE DIV.
770 Garrison Avenue
Bronx, NY 10474
------------------------------------------------------------------------------------------------------------
FACTORY REGISTRATION CARD
THANK YOU FOR PURCHASING A QUALITY SUMMIT®APPLIANCE
SUMMIT Model No. ____________________________ Serial No. ______________________________
Customer’s Name ______________________________________ Date of Delivery _________________
Address _________________________________________________________ Apt No. _____________
City _________________________________________ State _____________ Zip _________________
Dealer’s Name ______________________________________ City _____________ State___________
Is this unit for: Private Home Apartment Office Other ______________________________
Reason for selecting this unit: Dealer Recommendation Features Size Price
Other ______________________________________________________