Sunjoy L-DN1059SST-D User manual

1
Heirloom Slate Round Table
Item# L-DN1059SST-D
Congratulations on your purchase of our SUNJOY Heirloom Slate Round Table. Our clear,
easy to follow, step-by-step instructions will guide you through the assembly process from
start to finish.
WARNING:
THIS UNIT IS HEAVY! For safety, DO NOT assemble this item alone. 4 people are
recommended for safe assembly.
Keep all children and pets away from assembly area. Children and pets should be supervised
when they are in the area of the Table construction.
Keep assembly area at least 6 feet from any obstruction such as a fence, garage, house,
overhanging branches, laundry line or electrical wires.
Some parts may contain sharp edges. When assembling and using this product, basic safety
precautions should always be followed to reduce the risk of personal injury and damage to
the product. Please read all instructions before assembly and use.
Check all bolts for tightness before use. IMPORTANT - check and tighten bolts often to keep
them secure!
IMPORTANT
Please take time to read these instructions thoroughly and follow each step carefully for safe and easy
operation. Keep this manual for future reference.
For technical assistance on assembly or replacement parts, call Sunjoy Industries at 1-866-578-6569
from 8:30AM to 5:30PM EST, or email us at [email protected], or visit www.sunjoydirect.com for
assistance.

2
No Description Qty
A Table Top 1
B Leg 4
C Bottom Fixed Ring 1
D Top Fixed Ring 1
E Side Panel 2
F Door Panel 2
GHandle
(Pre-assembled on F) 2
H Umbrella Hole Cap 1
AA Bolt M6×20 12
BB Bolt M6×35 4
CC Bolt M8*45 8
DD Bolt M6*15
(Pre-assembled on F) 2
EE Spring Washer M6 16
FF Flat Washer M6 16
GG Spring Washer M8 8
HH Flat Washer M8 8
II Wrench M6 1
JJ Wrench M8 1
KK Adjustment Foot Pad
(Pre-assembled on B) 4
Step 1: Use Bolt (AA) ,Spring Washer (EE)
and Flat Washer (FF) to connect Leg (B)
with Bottom Fixed Ring (C). Don’t lock tight.
Parts List

3
Step 2: Use Bolt (AA), Spring Washer (EE) and
Flat Washer (FF) to lock Side Panel (E), Door
Panel (F) and Leg (B). (Note: don’t mess with the
order. Put Door Panel in the middle, the Side
Panel next to the Door Panel.) Assemble others
in the same way. Don’t lock tight.
Step 3: Use Bolt (BB), Spring Washer (EE) and
Flat Washer (FF) to connect Top Fixed Ring (D)
with Leg (B). Don’t lock tight.
Step 4: Use Bolt (CC), Spring Washer (GG) and
Flat Washer (HH) to connect Leg (B) and Table
Top (A). Then, lock all the parts tight.
Step 5: Turn over the assembled table. Put
Umbrella Hole Cap (H) on the table. Adjust the
Foot Pads and make the table stable. (This is
HEAVY. For safety, do not ture over alone.)
Assembly completed!

4
Care & Maintenance
Before using, clean the table completely with a soft dry towel. When not in use, wipe free of any
dirt or loose objects, wash with a mild solution of soap and water; rinse thoroughly and dry
completely.
Do not use strong detergent or abrasive cleaners. When not in use, recommend the use of patio
furniture covers.
Steel components of garden accessories and furniture are treated with rust inhibiting paint.
However, due to the nature of steel, surface oxidation (rusting) will occur if this protective coating
is scratched.
To minimize this condition, it is recommended that care be taken when assembling and handling
the product, in order to prevent the paint from being scratched.
Like all topical coatings, cleaning should be with a non-abrasive neutral pH cleaner, you may call
the toll free number 877-738-7325 to obtain it from V-SEAL Sealers.
Limited Warranty:
Sunjoy Industries warrants to the original purchaser that this item is free from defects in
workmanship and materials for a period of 1 year from the date of purchase, provided the item
was factory-sealed at the time of purchase and is maintained with care and used only for personal,
residential purposes. Should any manufacturing defect arise within this warranty period, Sunjoy
Industries will repair or replace (at our option) any defective merchandise upon proof of purchase;
however, transportation and delivery costs, as well as payments to a third party for assembly or
disassembly of the item, remain the responsibility of the purchaser. A purchaser of an "open box,"
previously-returned, or "clearance" item, as well as original purchasers outside of the warranty
period, may obtain replacement parts from Sunjoy Industries for products in current production, at
nominal cost.
Exclusions:
Items used for commercial, contract, or other non-residential purposes, or items damaged due to
acts of nature, vandalism, misuse, or improper assembly are not covered. Corrosion or rusting of
hardware is not covered. Proof of purchase (dated register receipt) is required for warranty
claims. Warranty is to the original purchaser and is non-transferable. Any replacement of
warranted items will be in the original style and color, or a similar style and color if the original is
unavailable or has been discontinued. As some states do not allow exclusions or limitations on an
implied warranty, the above exclusions and limitations may not apply. This warranty gives you
specific rights, and you may also have other rights, which vary from state to state.