Sunjoy D-DNC487PWD User manual

Assembly Instructions
D-DNC487PWD
WARNING:
Repeated assembly can weaken the locking ability of the screw/bolt/nut. Periodically
check all bolted connections on your product to make sure they are tight and secure. Keep
these instructions for future reference.
Some parts may contain sharp edges. Wear protective gloves as necessary.
DO NOT stand on the swing seat.
Set it up on the level ground.
Attention: There are pre-crack slots on the back side of the log, this is not inferior,
the slot is pre-drilled and intended produced, this is to allow the wood to naturally
shrink and expand.

Part Description Qty.
A Beam 1
B Leg 4
C Bracket 4
D Connection 2
E Boom 2
F Back 1
G Seat 1
H Armrest 2
I Stick 2
AA M10*170 Bolt 4
BB M10*120 Bolt 8
CC M10*150 Bolt 4
DD M10*300 Bolt 2
EE M4*45 Screw 2
FF M10*130 Bolt 2
HH M10*120 Swinging Ring 2
II Hook 2
JJ M10 Nut 22
KK M10 Washer 42
Step 1: Attach Leg (B) to Beam (A) with Bolt AA, Nut JJ and 2
pieces Washer KK.
Don’t fasten bolt now.

Step 2: Attach Leg (B) to Connection (D) and Bracket (C) with Bolt BB, Nut JJ and 2 pieces Washer KK,
attach Bracket (C) to Beam (A) with Bolt AA, Nut JJ and 2 pieces Washer KK. Then fasten all the bolts now.
Step 3: Insert Back (F) into the hole of Seat (G), attach Stick (I) to Seat (G) and Armrest (H) with Bolt DD
and Washer KK, attach Armrest (H) to Back (F) with Bolt FF, Nut JJ and 2 pieces Washer KK.

Step 4: Attach Back (F) to Seat (G) with Screw EE, attach Boom (E) toArmrest (H) and Seat (G) with Bolt CC,
Nut JJ and 2 pieces Washer KK.
Step 5: Attach Swinging Ring HH to Beam (A) with
Washer KK, 2 pieces Nut JJ, hang the Hook II on
Swinging Ring (HH), then hang the ring on Boom (E) to
Hook II.
Now your swing is ready to use, enjoy it!

Limited Warranty:
This limited warranty is extended to the original purchaser and applies to defects in materials
and workmanship of your item provided the item is maintained with care and used only for
personal, residential purposes. The item is warranted to be free from defects in material or
workmanship for a period of six (6) months. We don't reimburse for transportation or
delivery costs, or compensate the individual or any outside party for assembling or
disassembling the product.
Exclusions:
Items used for commercial, contract, or other non-residential purposes, or items damaged due
to acts of nature, vandalism, misuse, or improper assembly are not covered. Corrosion or
rusting of hardware is not covered. Proof of purchase (dated register receipt) is required for
warranty claims. Warranty is to the original purchaser and is non-transferable. Any
replacement of warranted items will be in the original style and color, or a similar style and
color if the original is unavailable or has been discontinued. As some states do not allow
exclusions or limitations on an implied warranty, the above exclusions and limitations may not
apply. This warranty gives you specific rights, and you may also have other rights, which vary
from state to state.
Important:
For technical assistance on assembly or replacement parts. In the continental U.S., you can
call us toll-free at 1-866-578-6569 from 8 a.m. to 5 p.m. CST Monday – Friday. In the
continental Canada, you can call us toll-free at 1-844-SUNJOY1 (1-844-786-5691) from 8 a.m.
to 5 p.m. CST Monday – Friday. You can fax the replacement part form which is in the box to
(740)-283-3549 .You can also send us an email to [e-mail]
manufacturer reserves the right to repair or replace the defective product, at its discretion.
Made in China