Sunjoy GZ-002P-WI User manual

GazeboAssembly Instruction – Sun Gazebo
Required tools:Adjustable wrench
Part List
No.
Part
Qty.
A
Centre fitting
1
B
Lintel
4
C
Screen
4
D
Pole (88.4”)
4
E
Pole (65.2”)
4
F
Bolt (0.24” x 0.98”)
16
G
Washer (0.24”)
48
H
Nut (0.24”)
16
I
Plastic nut cap
16
J
Bolt (0.24” x 0.63”)
16
K
Canopy
1
L
Stake
8
M
Bracket (pre-assembled)
8

Assembly Instructions
Step 1 Lay parts on ground.
Step 2 Attach lintel (B) to screen (C) and fasten using bolt
(J) and washer (G). Make sure not to cross-thread
bolts (see Fig. 1). Do not overtighten fasteners.
Step 3Attachpoles (D) tocentre fitting (A) and fasten using
bolt (F), washer (G) and nut (H) (see Fig.2).
Step 4Attach poles (E) to centre fittings (A) and fasten
using bolt (F), washer (G) and nut (H) (see Fig. 2).
Step 5 Attach poles (D) to screen (C) and fasten using bolt
(F), washer (G) and nut (H) (see Fig. 3).
Step 6Attach poles (E) to lintel (B) and fasten using bolt (F),
washer (G) and nut (H) (see Fig. 3).

Step 7 Put canopy (K) overthe frame, fit canopycorners
to the top part of poles (D), and then fit canopy
rim onto the top part of poles (E).
Step 8Tighten allhardware and putplastic nut caps (I) on
nuts (H).
Step 9 Pull up the brackets (M).
Step 10 Secure the gazebo to the ground with stakes (L).
WARNING :
Keep all flame and heat sources away from this gazebo fabric - it is NOT fire proof.
IMPORTANT :
*Please check to make sure you have all the parts.
*Please do not return this product to the store. For technical assistance on assembly or replacement parts call Sunjoy Industries at 1(866)578-6569 from 8:30
AM to 5:30 PM PacificStandard Time or e-mail [e-mail] for assistance.