Sunjoy Somerset User manual

10'x12' Somerset Gazebo Instruction Manual
Item #: L-GZ212PCO-B
SKU #: 810138519

IMPORTANT:
Please read and follow all safety statements, warnings, assembly instructions, use & care
directions before attempting to assemble.
WARNING:
1. When installing and assembling your gazebo, it is recommended that 2 or more adults are
involved.
2. This product is intended for outdoor use only and should be placed on flat, horizontal
ground.
3. Ensure enough clearance around the product.
4. Do not use the unit during an electrical storm, as there is a remote chance of getting struck
by lightening.
5. Do not climb on top of the gazebo. Falling off the gazebo can result in serious injury,
possibly even death.
6. Never barbecue under this gazebo or use lanterns that contain naked flames.
7. This package contains small items and plastic bags that should be kept away from children.
8. Ensure that all connectors & poles are firmly secured in position fully. It is important to do so
before use so as to avoid collapsing or damage to the item, which could result in injury.
9. WARNING: Keep all flame and heat sources away from this tent fabric. This tent is made
with fabric that meets CPAI – 84 specifications for flame resistance. It is not fire proof. The
fabric will burn if left in continuous contact with any flame source. The application of any
foreign substance to the tent fabric may render the Flame-resistant properties ineffective.
10. WARNING: Please take down the gazebo during strong wind. The manufacturer or retailer
is not liable for any loss of the product or other items due to the failure to take down the gazebo
during strong wind.
11. Hook maximum weight: 26 lbs.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list. If any part is missing or damaged, do not attempt to assemble the
product.

Finial A 1
Small top connector B1 1
Hook B2 1
Small top arch beam C 4
Upper screen corner
connector 1 D1 2
Upper screen corner
connector 2 D2 2
Upper screen long connector E 2
Upper screen short
connector F 2
Arch beam G1 4
Long side middle beam G2 2
Short side middle beam G3 2
Arch beam connector 1 H1 2
Arch beam connector 2 H2 2
Middle beam connector I 4
Short decorative slot 1 J1 2
Short decorative slot 2 J2 2
Long decorative slot 1 K1 2
Long decorative slot 2 K2 2
Short mosquito netting pipe L1 4
Long mosquito netting pipe L2 4
Post 1 M1 4
Post 2 M2 4
Parts List

Post connector 1 N1 4
Post connector 2 N2 4
Long side arch support beam O1 6
Short side arch support
beam 1 O2 2
Short side arch support
beam 2 O3 2
Small canopy P 1
Large canopy Q 1
Mosquito netting R 1
Privacy panel S 1
Parts List
AA M6X15 Bolt 36 PCS
BB M6 Flat washer 52 PCS
CC M6X15 Screw 16 PCS
W M6 Wrench 1 PCS
Hardware Pack 1

Fig.1:
Insert short
decorative slot 1 (J1) into
(J2), then secure middle
beam connector (I) to (J1)
& (J2) by bolt (AA) and
washer (BB). Install long
decorative slot (K1) and
(K2) in the same way.
Fig.2:
Insert short
decorative slot 2 (J2) into
long decorative slot 1
(K1), secure Arch beam
connector 1
(H1) and
Post connector 1 (N1) to
(J1) & (K1) by bolt (AA)
and washer (BB).
Fig.3:
Attach post
connector 2 (N2) to
lon
g decorative slot
(K1) & (K2) bolt (AA)
and washer (BB).
Fig.4:
Attach mosquito
netting pipe (L1) and (L2)
to decorative slot (J1) &
(J2) & (K1) & (K2) by
screw (CC) and washer
(BB).
Fig.5: Insert upper
screen connector (E)
and (F) into upper
screen corner connector
(D1) & (D2).
Fig.6:
Insert middle
beam (G2) & (G3) into
upper screen connector
(E) & (F).
Fig.7: Insert middle
beam (G2) and (G3) into
middle beam connector
(I).
Fig.8: Insert arch beam
(G1) into upper screen
corner connector (D1) &
(D2).

Fig.9: Insert arch
beam (G1) into arch
beam connector (H1)
or (H2).
Fig.10: Insert small top
arch beam (C) into small
top connector (B1), and
attach hook (B2) to (B1).
Fig.12: Put the large canopy
(Q) onto the top, then insert
small top arch beam (C) into
(D1) & (D2). Spread (Q) and
fix it to the frame by the hook
on the canopy.
Fig.11: Put the small
canopy (P) onto the
small to
p, then attach
finial (A) to small top
connector (B1).
AA M6X15 Bolt 46 PCS
BB M6 Flat washer 46 PCS
Hardware Pack 2
Fig.13:
Lift the
assembled frame, insert
post 1 (M1) into post
connector (N1), fully
tighten by bolt (AA) and
washer (BB).
Fig.14: Insert post (M2)
into post connector
(N2), fully tighten by bolt
(AA) and washer (BB).
Fig.15:
Attach long
side ar
ch support
beam (O1) to post
(M1) or (M2) by bolt
(AA) and washer
(BB).
Fig.16: Attach long side
arch support beam (O1)
to long decorative slot
(K1) & (K2) by bolt (AA)
and washer (BB).

Fig.17&17-1: Attach
short side arch
support beam (O2/O3) to post (M1) &
decorative slot (J1) & (J2) by bolt (AA) and
washer (BB).
EE Plastic ring 120PCS
FF Φ6X180MM Stake 24PCS
Hardware Pack 3

USE & CARE
1. This Gazebo is not a permanent structure and should be disassembled & stored away after
use.
2. Do not repack your gazebo until completely dry.
3. This Gazebo must not be left erect in windy conditions.
WARNINGS
1. Assembly Instructions must be followed.
2. Stakes supplied must be used to hold this gazebo in place when upright.
3. Warranty does not cover damage due to extreme weather conditions.
CUSTOMER SERVICE
Sunjoy Industries warrants to the original purchaser that this item is free from defects in
workmanship and materials of your item provided the item was factory-sealed at the time of
purchase and is maintained with care and used only for personal, residential purposes. The
item is warranted to be free from defects in material or workmanship for a period of 6 months.
Should any manufacturing defect arise within this warranty period, Sunjoy Industries will repair
or replace (at our option) any defective merchandise upon proof of purchase; however,
transportation and delivery costs, as well as labor and material charges to remove or
replace parts, remain the responsibility of the purchaser. A purchaser of an "open box,"
previously-returned, or "clearance" item, as well as original purchasers outside of the warranty
period, may obtain replacement parts from Sunjoy Industries for products in current production,
at nominal cost.
If you are within the return policy that most stores have, you do have the option of returning
this item back to the store which you bought it from for an exchange of the same item, or a
refund of the purchase.
If you are within or beyond the return policy that most stores have, and need tech. assistance
or replacement parts, please call Sunjoy Industries at 1(866) 578-6569 from 8:30 am to 5:30
pm eastern standard time or e-mail to [e-mail] or fax your parts replacement
order form together with the purchase receipt to 1 [phone] for assistance.
Fig.18: Attach the mosquito netting (R)
and privacy panel (S) to mosquito
netting pipe (L2) & (L1).
Fig.19: Fix the assembled gazebo to the
ground by stake (FF).