Sunnydaze Decor LAM-443 User manual

Page 1 / 2
OUTDOOR COFFEE TABLE WITH SHELF
LAM-443
Read all assembly and care instructions carefully before using this product. Save this manual for future reference.

  
ATable Top 1
BShelf 1
CEnd Panel 2
DJCBC 60mm Bolt 8
EBarrel Nut 8
FHex Key 1
GBarrel Nut Driver 1
LY508
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
65
pounds
29.5 kg
Weight Capacity
01/2022
WARNING:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage or loss, whether direct or

Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
CHOKING HAZARD — This item contains small parts that can
be swallowed. Keep children and pets away during assembly.
WARNING
NOTE: Over time, the bolts may become loose.
Save the included tools for tightening loosened hardware.

A
D
E
B
F
G
D
C
Page 2 / 2LY508
ASSEMBLY
1. Lay Table Top (A) and Shelf (B) face-down on a clean, soft surface.
2. With the slotted end facing upward, place four Barrel Nut (E) into the underside of the table top. Use Barrel
Nut Driver (G) to turn the barrel nut so the threaded hole aligns with the pre-drilled hole. Repeat this step
with Shelf (B).
3. Align the Leg Panel (C) with Table Top (A) and loosely secure by hand-tightening two JCBC 60mm Bolt (D),
as shown. Repeat this step on the opposite side of the table.
4. Align Shelf (B) between the leg panels and secure by hand-tightening four JCBC 60mm Bolt (D).
5. Tighten all bolts using Hex Key (F).
01/2022
SAFE USE: Only use on a at, level surface. Never sit or climb on the table. Do not exceed weight capacity.
INSPECT: Periodically check assembly points and tighten ttings as necessary.
CLEANING: Following the woodgrain, wipe with a soft cloth to remove dust, dirt, and debris. Do not use chemicals or
abrasive materials as they will damage the wood.
STORAGE: Maintain the appearance and prevent damage by storing this item indoors when not in use.
Wood expands when wet and contracts when it dries. Therefore, repeated and excessive exposure to moisture, rain,
and snow can damage the product. The resulting damage includes, but is not limited to, assembly points becoming
loose, wood cracking, mold and mildew growth, and hardware rust.
MAINTENANCE:If left untreated, the wood will weather. To maintain the appearance, apply a suitable penetrating
wood oil (not included) at least once per year or when the wood looks particularly dry. Before applying a suitable wood
oil, clean the unit and bring it into a dry, warm, indoor location. Allow the unit to dry thoroughly before applying oil; drying
may take several days. Only apply oil to wooden surfaces. Apply oil as directed by the wood oil manufacturer.
WARNING: THE ONE-YEAR WARRANTY DOES NOT COVER DAMAGES OR DEFECTS
CAUSED BY THE USE OF PROTECTIVE COATINGS OR CHEMICAL TREATMENTS.

Care & Maintenance
NOTE: 