Sunnydaze Decor MERANTI FRN-498 User manual

MERANTI WOOD OCCASIONAL BENCH
FRN-498

Page 1 / 3
HELPFUL HINTS
• Sunnydaze Decor advises reading this manual thoroughly
and assembling the item soon after purchase.
• Assemble the bench one side at a time to ensure the
backrest easily attaches.
  
AL/R Arm Panel 2
BBackrest 1
CSeat 1
DJCBC M6x60 Bolt 6
EBarrel Nut 6
FBarrel Nut Driver 1
GHex Key 1
WARNING
CHOKING HAZARD — This item contains small parts that can
be swallowed by children. Keep children away during assembly.
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
2-PERSON
ASSEMBLY
RECOMMENDED
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
07/202088942


Read carefully and understand assembly before beginning.
Page 2 / 3
STEP 1
A: 1
C: 1
D: 2
E: 2
STEP 3
• Insert two Barrel Nuts (E) into the underside of Seat Panel
(C). Use the Barrel Nut Driver to align the opening of the
barrel nut with the pre-drilled hole on the side of the seat.
• Align the pegs and pre-drilled holes of Seat Panel (C) with
the notches and pre-drilled holes of the Arm Panel (A).
Secure by tightening two M6x60 Bolts (D).
07/202088942
STEP 2
B: 1
D: 1
E: 1
• Insert one Barrel Nut (E) into the underside of the top
horizontal slat on Backrest (B). Use the Barrel Nut Driver to
align the opening of the barrel nut with the pre-drilled hole
on the side of the backrest.
• Align the pegs and pre-drilled holes of Backrest (B) with the
notches and pre-drilled holes of the Arm Panel (A). Secure
by tightening one M6x60 Bolt (D).
• Repeat Step 1 and Step 2 to connect the second arm panel.
Assemble the
bench one side
at a time.
To use the table, simply lift it
upward and place the support bar
into the grooves and ip the locking
mechanism over the support bar.

Page 3 / 3
Care & Maintenance
For residential use only. Only use on a at, level surface. Use caution when extending and
collapsing the table to avoid pinching ngers. Never sit on, put pressure on, or set heavy items on the table
while it is extended as doing so may break the table and could cause injuries. Do not exceed the weight
capacity of the furniture.
Periodically check assembly points and tighten ttings as necessary.
Identify the direction of the woodgrain. Following the direction of the woodgrain, wipe surfaces
with a soft, dry cloth. Do not use harsh chemicals or abrasive materials or a pressure washer to clean.
COVER: When not in use, cover furniture with a breathable cover to help protect it from the harmful e󰀨ects
of sunlight, inclement weather, dust build-up, and collecting debris.
: Protect this item from inclement weather, especially ice and snow. Move
the bench to a dry indoor location. Covering while in storage is recommended to help prevent dust build-up.
:If left untreated, the wood may weather. A suitable wood stain or oil may need to be
applied yearly.
WARNING: THE ONE-YEAR WARRANTY DOES NOT COVER DAMAGES OR DEFECTS
CAUSED BY THE USE OF CHEMICAL TREATMENTS OR PROTECTIVE COATINGS.
WARNING!
             
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,

07/2020

88942