Sunnydaze Decor XCA-139 User manual

Page 1 / 3
RUSTIC METAL
WINDMILL STATUE
XCA-139
Read this manual carefully before use and save it for future reference.
Assemble components on a soft, clean surface

Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
21A0335
  
ARotor Cap 1
BRotor 1
CRotor Tail 1
DTower Top** 1
ETower Base 1
FPlatform 1
GWingnut**
(on bottom of part D) 2
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
03/2022
WARNING:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage or loss, whether direct or

CAUTION: SHARP EDGES
HANDLE WITH CAUTION
CHOKING HAZARD —
This item contains small
parts that can be swallowed.
Keep children and pets
away during assembly.
WARNING
**To prevent small parts from being lost during shipping, the
wingnuts are loosely attached to the bottom of Top Tower (D).

Page 2 / 321A0335 03/2022
ASSEMBLY
STEP 1
A: 1
B: 1
C: 1
STEP 2
D: 1
E: 1
G: 2
STEP 3
F: 1
STEP 4
Run the threaded end of Rotor Tail (C) through the
back side of Rotor (B) and secure with Rotor Cap
(A).
Ensuring the threaded
bolts go through the
mounting holes, place
Tower Top (D) onto
Tower Base (E).
Securethecomponents
using two Wingnuts (E)
as shown.
Place the assembled
rotor onto the top of the
tower, as shown.
Slide Platform (F) over
the top of the tower.
The platform will sit
loosely on the tower;
do not push down on
the platform as it may
cause the metal to
bend and/or break.

Page 3 / 321A0335 03/2022

• For decorative purposes only. This item is not a toy.
• Do not allow children to use or play with this item.
• Bending the metal may cause permanent damage or breakage, and could result in serious injury.
• Do not exceed the weight capacity of the shelves.
• Do not use harsh chemicals or abrasive materials to clean this item.
• Store indoors during high-wind conditions.
• Manufacturer is not liable for damage or personal injury caused by improper use, inadequate maintenance or
neglect of this product.
SAFETY STATEMENTS & WARNINGS
CARE & MAINTENANCE
CLEANING: Use a soft, dry cloth to gently wipe away dirt and debris. For stuck-on dust and dirt, dampen a
soft cloth and gently wipe soiled surfaces. Do not scrub, use cleaners, or abrasive materials as doing so will
damage the nish and void the product warranty.
SUN EXPOSURE: As with any product, sun exposure will gradually fade and discolor the finish over time.
WATER DAMAGE: Over time, water will cause natural erosion to the nish and structure of this unit. Damage
and degradation from exposure to water and other weather elements are not covered under the product
warranty.
WINTER CARE & STORAGE: Store in a dry, indoor location. This item was not manufactured to withstand
extreme temperature changes. Do not allow water to collect or freeze on or inside the unit.
WARNING!
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,

TROUBLESHOOTING
Rotor blades not spinning?
• Make sure the windmill is on a flat, level surface.
• Check to make sure the hardware is not over-tightened.
• The rotor is designed to spin slowly, do not force or alter the blade assembly as doing so may damage the
product and void the product warranty.
If you experience issues with assembly or the product was damaged during shipping,
please contact Sunnydaze Decor Customer Service Team through one of the methods mentioned at the top of page 1.
Please have the item number and order information ready to expedite response time.