Sunnydaze Decor MERANTI STR-411 User guide

Page 1 / 2BSB-029
MERANTI WOOD 2-SEAT BENCH
STR-411
Read all assembly and care instructions carefully before using this product. Save this manual for future reference.

  
ABackrest 1
BSeat 1
CSide Panel 1 
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
HELPFUL HINT
Do not fully tighten hardware until all components are assembled. If hardware is tightened too soon, mounting

WARNING
CHOKING HAZARD — This item contains small parts
that can be swallowed by children. Keep children away
during assembly.
  
1JCBC M6 x 60mm Bolt
with Barrel Nut 4
2JCBC M6 x 50mm Bolt 2
3JCBC M6 x 45mm Bolt 2
4Barrel Nut Driver 1
5Hex Key 1
2-PERSON
ASSEMBLY
RECOMMENDED
NOTE: Save the hex key to use in the event hardware becomes loose and
needs to be tightened.
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
08/2020

Page 2 / 2BSB-029
ASSEMBLY
Read carefully and understand assembly before beginning.
Do not fully tighten hardware until all components have been loosely assembled.
STEP 1
B: 1
C: 1
1: 4
STEP 2
A: 1
2: 2
3: 2

WARNING:


• Insert 4x Barrel Nut into Seat (B). Use the Barrel Nut Driver
(4) to align the barrel nut with the hole on the side of the seat.
• Align the holes in Side Panel (C) with Seat (B) and fasten
by hand-tightening 4x JCBC M6 x 60mm Bolt (1); ensure
the bolt threads into the barrel nut.
• Align the holes on Backrest (A) with Side Panels (C).
• Hand-tighten 2x JCBC M6 x 50mm Bolt (2) into the upper
holes and 2x JCBC M6 x 45mm Bolt (3) into the lower holes.
• Tighten all hardware using Hex Key (5). Do not over-
tighten, as doing so may damage the wood.
General Use & Care
SAFE USE: 
MOVING: Always lift furniture when moving it around, never drag it.
I N S P E C T: Periodically check bolts and tighten as necessary.
EXPOSURE: Over time, sunlight and weather elements may degrade and change the color of natural wood. Avoid
leaving wooden furniture in the rain or high-humidity climates as wood expands and contracts with moisture and humidity
changes. If this item is not used for extended periods, cover it with a breathable cover or store it indoors.
WINTER CARE & STORAGE: Protect this item from inclement weather, especially ice and snow. Move it to an indoor
location that is cool and dry. Covering while in storage is recommended to help prevent dust build-up.
CLEANING: Identify the direction of the woodgrain and wipe dust and debris using a soft, dry cloth. Surface mildew can
be washed away using a very mild solution of soap and water and a soft cloth; after drying, oil treatment is recommended.
MAINTENANCE:Left untreated, the wood will turn a silvery gray color. To maintain the appearance, apply a suitable
penetrating Wood, Teak or Linseed Oil (not included) twice a year. Bring furniture indoors and allow it to dry for at least
12 days before applying oil. Only apply oil to wooden surfaces. Use a soft cloth or soft brush and carefully apply oil as
directed by the wood oil manufacturer.
WARNING: THE ONE-YEAR WARRANTY DOES NOT COVER DAMAGES OR DEFECTS
CAUSED BY THE APPLICATION OF CHEMICAL TREATMENTS OR PROTECTIVE COATINGS.
08/2020