Sunnydaze Decor QX24LH User manual

24LH 04/2023
STEEL FIREWOOD LOG HOOP
QX24LH
Read all assembly and care instructions carefully before using this product. Save this manual for future reference.

Page 1 / 2
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
  
ASide Panel 2
BTop Bracket 1
CSide Bracket 2
DM6x30mm Bolt 6
EWasher 6
FLock Nut 6
GSpanner 1
HPhillips Hex Key 1
CHOKING HAZARD — This item contains small
parts that can be swallowed. Keep children and pets
away during assembly.
WARNING
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
Save the packing slip.

24LH 04/2023 Page 2 / 2
ASSEMBLY
Review all information and understand assembly before beginning.
• Place log rack on a hard, dry surface.
• Do not overload the log rack — holds approximately 1/8 face-cord of firewood.
• Ensure fittings are tight before use. Periodically check and tighten hardware as necessary.
• Protect the unit from outdoor elements with a cover. Cover not included.
• Do not allow children to play with or around the log rack.
SAFETY STATEMENTS & WARNINGS

WARNING!
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage


1. Insert one M6x30mm Bolt (D)
into the top of Side Panel (A).
Repeat for the remaining panel.
2. Loosely secure the top of log
hoop using Top Bracket (B),
two Washers (E) and two Lock
Nuts (F), as shown.
3. Align Side Brackets (C) with
the sides of the hoop and
secure using M6x30mm Bolts
(D), Washers (E) and Lock
Nuts (F).
4. Tighten all hardware using
included Spanner (G) and
Phillips Hex Key (H).
TIP: To tighten the hardware more
quickly, turn the screwdriver in the bolt
head clockwise while simultaneously
turning the spanner on the lock nut
counterclockwise.
Nylon
Insert IMPORTANT: Lock nuts must be installed with the nylon insert on the outside.
Tools are required to fully tighten lock nuts, failure to properly tighten the lock nuts may
result in product malfunction or personal injury.