Sunrise Medical Switch-It MicroPilot User manual

247751
Switch-It
MicroPilot
Owner's Manual

Dealer signature and stamp
Thank you for choosing a Switch-It Product. We want to
hear your questions or comments about this manual, the
safety and reliability of your system, and the service you
receive from your Authorized Dealer. Please feel free to
write or call us at the address and telephone number below:
Sunrise Medical (US) LLC
Customer Service Department
2842 N. Business Park Ave
Fresno, CA 93727 USA
[phone]
Be sure to return your warranty card, and let us know if you
change your address. This will allow us to keep you up to
date with information about safety, new products, and
options to increase your use and enjoyment of this base
system.
You can also register your product at:
www.sunrisemedical.com/register
FOR ANSWERS TO YOUR QUESTIONS
Your Authorized Dealer knows your wheelchair best, and can
answer most of your questions about system safety, use and
maintenance. For future reference, fill in the following:
Supplier: __________________________________________
Address: __________________________________________
_________________________________________________
Telephone: ________________________________________
Serial #:______________ Date/Purchased:_______________
INFORMATION YOU SHOULD KNOW
No component of this system was made with Natural Rubber Latex.
www.sunrisemedical.com /register
DISPOSAL AND RECYCLING INFORMATION
When this product reaches the end of its life, please take
it to an approved collection or recycling point designated
by your local or state government. This Seating system is
manufactured using a variety of materials, Your product
should not be disposed of as ordinary household waste.
You should dispose of your system properly, according to
local laws and regulations. Most materials that are used
in the construction of this product are fully recyclable.
The separate collection and recycling of your product at
the time of disposal will help conserve natural resources
and ensure that it is disposed in a manner that protects
the environment.
Ensure you are the legal owner of the product prior to
arranging for the product disposal in accordance with the
above recommendations.
247751 Rev. A
2

WARNING
This device can be affected by Electro-Magnetic Interference (EMI) and Radio Frequency
Interference (RFI).
-Radio wave sources, such as radio stations, TV stations, amateur radio (HAM) transmitters, two-way
radios, and cellular phones can affect powered control.
- If unintended movement or brake release occurs, turn the power wheelchair OFF and do not
operate until inspected, repaired, and/or replaced.
- If the power wheelchair acts in an erratic manner, turn the power wheelchair OFF and do not
operate until inspected, repaired, and/or replaced.
- If the joystick stem is damaged, it can cause the power wheelchair to operate erratically. Turn the
power wheelchair OFF and do not operate until inspected, repaired, and/or replaced.
- If any of the device cabling becomes frayed, cut, or disconnected in any way, t urn the power OFF
and do not operate until inspected, repaired, and/or replaced.
NOTE: Check all parts for shipping damage. In case of damage DO NOT use. Contact Carrier/
Sunrise Medical for further instructions.
DO NOT install this equipment without first reading and understanding this manual. If you are
unable to understand the Warnings, Cautions, and Instructions, contact a qualified clinician or
supplier - otherwise injury or damage may occur.
WARNING
3
247751 Rev. A

User information
Congratulations on choosing a Switch-It product. Sunrise
Medical’s high-quality mobility products are designed to
enhance independence and make your everyday life easier.
As a part of our ongoing product improvement initiative,
Sunrise Medical reserves the right to change specifications
and design without notice.
This user manual will help you to use and maintain your
product safely.
If you are visually impaired,
this document can be viewed
in PDF format at
www.SunriseMedical.com
AB FG
D
CE
44
247751 Rev. A

A. Product Description:
The MicroPilot is a light touch proportional joystick wheelchair drive
control. Force-based technology enables users with minimal
strength and without range of motion to operate their wheelchair
with 360° of control, as well as the full range of the wheelchair’s
drive parameters (speed, acceleration, etc.) The MicroPilot works
in a plug-and-play fashion and is compatible with most
manufacturers’ electronics, including Q-Logic 2.0 and 3.0, R-Net,
and older P&G.
B. Technical Information:
• Alternative Control Type: Proportional / Analog
• Activation Type: Force / Pressure
• Initial Activating Force: 11g, adjustable
Force required - Most sensitive: 11g - 40g
Force required - Least sensitive: 11g - 100 g
• Travel Before Activation: Zero
• Feedback: Wheelchair movement
• Connector Type: D-Sub 9 connection to wheelchair
display
• Approximate Joystick Dimensions: .625" (15.9mm)
diameter x 2.25" (57.2mm) height (without knob)
C. Compatibility:
• Penny & Giles R-Net Electronics: Omni is required
• Curtis Electronics Enable 50: Enhanced Display is
required
• Dynamic Controls DX2: Switch It DX Dongle (DXD) is
required
• Invacare Electronics: Invacare MK6 Sip N’ Puff Module
(SNPMK6) i s required. MicroPilot for Invacare (MP-I)
version must be requested at time of order.
D. Key Features:
• Metal construction offers significant durability
advantage.
• The MicroPilot is the only force/pressure-based
miniature proportional joystick on the market.
E. Sensitivity:
• The MicroPilot comes with a sensitivity adjustment
potentiometer to change the amount of force required
for joystick activation. The MicroPilot comes from the
factory at the most sensitive setting (11g - 40g), and is
adjustable from 11g to 100g. (Figure 1 dial).
1
5
247751 Rev. A

F. Calibration:
• It is possible to recalibrate the device in certain
instances, such as when a heavier knob is used or the
device is used at 90º angles. To recalibrate the
joystick:
a. Mount the joystick in the location of intended
use.
b. Ensure nothing is touching the knob throughout
the calibration process in order to get an
accurate and successful recalibration.
c. Turn power wheelchair off and ensure nothing
is placing any force on joystick knob/stem.
d. Press and hold the red button inside the
housing of the device with a small allen
wrench, paper clip or other small object.
(Figure 2, red button).
e. As you continue to hold the red button, turn
the power wheelchair on. The LED status
indicator will blink, alternating between red/
blue.
f. Release the red button, press it again for 1
second, then release.
g. Check the LED status indicator light:
-BLINKING BLUE indicates that calibration was
SUCCESSFUL
-BLINGING RED indicates that calibration
FAILED
h. Cycle power on the power wheelchair, and
the LED status indicator light (Figure 3) should
return to a SOLID GREEN until activated.
3
Unsuccessful calibrations are caused by the joystick having force in
any direction too far from the factory calibrated settings. If the LED
status indicator remains blinking or solid red, call customer service
for a Return Authorization number.
TROUBLESHOOTING
LED STATUS INDICATOR LIGHT:
•Solid Green - Neutral. Device is ready, check all
programming settings per Set-up Guide.
•Blinking Green - Driving
Note: If LED is blinking green and joystick is not being
touched or deflected, likely the joystick stem is bent
- call customer service for a Return Authorization
number.
•Solid Red - Device needs service, call customer
service for a Return Authorization number.
2
247751 Rev. A
6

WARRANTY
• All electronic components are covered under warranty for twelve (12) months from the date
of shipment, provided normal use, unless modified or damaged.
• All mounting hardware is covered under warranty for twelve (12) months from the date of
shipment, provided normal use, unless modified or damaged
• All wearable items (covers, pads, etc.) are covered under warranty for three (3) months from
the date of shipment, provided normal use, unless modified or damaged.
Each Switch-It device is carefully inspected and tested to provide peak performance. Every
Switch-It device is covered under a limited, express warranty.
Warranty claims should be processed through the nearest authorized supplier or dealer. A Return
Authorization number must be obtained prior to returning the item for evaluation, along with
details of the issue.
Items returned for warranty claim must be evaluated by Switch-It before warranty determination is
made. Should a defect in materials or workmanship occur during the warranty period, and the
item has not been modified or damaged, Switch-It will, at its option, rework or replace it without
charge.
Except for express warranties made herein, all other warranties, including implied warranties of
merchantability and warranties of fitness for a particular purpose are excluded. There is no implied
warranty beyond what is contained herein. Remedies for breach of express warranties herein are
limited to rework or replacement of the goods. In no event shall damages for breach of any
warranty include any consequential damages or exceed the cost of non-conforming goods sold.
7
247751 Rev. A
7

Customer Service: 800.333.4000
Fax: [phone]
In Canada: 800.263.3390
Sunrise Medical
2842 N. Business Park Ave.
Fresno, CA 93727 • USA
©2017 Sunrise Medical (US) LLC
12.17 247751 Rev. A
Website Addresses:
[email protected]
www.SunriseMedical.com
www.switchit-inc.com