SUP’AIR Delight 2 Series User manual

User’s manual
SUP’AIR - VLD
34 rue Adrastée
Parc Altaïs
74650 Annecy - Chavanod
FRANCE
45°54.024’N / 06°04.725’E
English
Revision index : 03/01/2017
Harness

Harness User’s manual
SUP’AIR _DELIGHT2 Page 2SUP’AIR manufactures its harnesses in Europe. Most of the components used are Made in Europe.
Thank you for choosing the Delight2.We are
glad to be able to share our common para-
gliding passion with you.
SUP’AIR has been designing, producing
and selling free flying equipment since
1984. By choosing a SUP’AIR product you
benefit from almost thirty years of expertise,
innovation and listening. This is also our phi-
losophy : working endlessly to develop bet-
ter products and to maintain a high quality
production.
We hope you will find this user’s manual
comprehensive, explicit and hopefully en-
joyable as well. We advise you to read it
carefully.
You will find the last up to date information
about this product, On our website www.
supair.com. If you have any further ques-
tions, feel free to ask one of our retailers for
answers. And naturally, the entire SUP’AIR
team is at your disposal on [e-mail]
We wish you many safe enjoyable flying
hours, and happy landings
Team SUP’AIR

Harness User’s manual
SUP’AIR _DELIGHT2 Page 3SUP’AIR manufactures its harnesses in Europe. Most of the components used are Made in Europe.
List of contents
Introduction 4
Technical specifications 5
Size choice 6
Components list 7
Equipment overview 8
Accessories assembly 9
Speedbag 9
Carabiners 10
Foot-plate 10
BUMPAIR 11
Foam wedge 12
Seat-plate 13
Speed-bar system 14
Installing the reserve parachute 15
Installing the reserve parachute 15
Overall system view 15
Reserve parachute handle connection - POD 15
Risers connection – harness 16
Riser connection – reserve parachute 17
Installing the reserve parachute in the container 18
Closing the reserve parachute container 19
Gear packing and tips. 21
Adjustments 22
The various adjustments 22
Adjusting the harness 23
Wing/harness Connection 24
Inflight behavior 25
Flight phases 26
Pre-Flight check 26
Take-off 26
In flight 27
Speed-bar use 27
Landing 27
Using the reserve parachute 28
Towing 28
Mandatory controls 28
Maintenance 29
Harness cleaning and maintenance 29
Storage and transport 29
Product longevity 29
Repairs 30
Materials 30
Recycling 30
Warranty 31
Disclaimer 31
Pilot’s gear 31
Service Book 32

Harness User’s manual
SUP’AIR _DELIGHT2 Page 4SUP’AIR manufactures its harnesses in Europe. Most of the components used are Made in Europe.
Welcome to the world of light and high performance gear! The DELIGHT2 is a Cross-country light enough to go hiking with. Its minimal
weight and size make it a good choice to carry to takeoff with ease. The air mass is translated to the harness without parasitic interfer-
ence and hence providing the right environment for refined and efficient piloting.
The DELIGHT2 harness was certified EN 1651 : 1999 and LTF 91/09,
Indicating that it meets European and German safety requirements.
After reading this manual, we suggest you to check your harness in static hang-posts to adjust it before your first flight.
Introduction
N.B : Three important icons will help you when reading this manual
Advice Caution ! Danger !!

Harness User’s manual
SUP’AIR _DELIGHT2 Page 5SUP’AIR manufactures its harnesses in Europe. Most of the components used are Made in Europe.
A
B
C
D
E
F
G
Model S M L
Pilot size 155 /175 cm 170 /185 cm 180 /195 cm
Pilot weight (mini - maxi) 60 - 80 kg 65 - 85 kg 70 - 100 kg
Harness weight (+ carabiners+speedbar) 3 500 g 3 640 g 3 840 g
Designed for Paragliding only
Back lenght (cm) 57 60 64
Back inclination adjustment (cm) 37 40 44
Seat length (cm) 38 42 45
Seat width (cm) 33 33 33
Carabiners height (cm) 45 45 45
Carabiners distance (cm) 37-55 37-55 37-55
Speedbag length (cm) 93 100 106
Impact damping system : Airbag No
Impact damping system : Bumpair Yes - 15 cm
Certification EN 1651 : 1999 - LTF 91/09
Tandem (Pilot or Passenger) No
Acrobatic flying No
Towing Yes
Reserve parachute pocket volume (L) 3 to 9 Liter volume capacity.
Technical specifications
ABack lenght
BBack inclination adjustment
CSeat length
DSeat width
ECarabiners height
FCarabiners distance
GSpeedbag length

Harness User’s manual
SUP’AIR _DELIGHT2 Page 6SUP’AIR manufactures its harnesses in Europe. Most of the components used are Made in Europe.
Size
Weight 1m55 1m60 1m65 1m70 1m75 1m80 1m85 1m90 1m95
50
55 S S S S
60 S S S S
65 S S S S
70 S S S M M
75 S M M M L
80 M M M L L
85 L L L L
90 L L L L L
95 L L L L
100 L L L
Choosing your harness’ size is important. You will find here below a height/weight table that will help you in your size choice. With its
hammock architecture and its “lying flat” flying position, we advise you to try out the harness under a hanging device at one of our
retailers in order to choose the correct size. For a complete list of our retailers, please click here : www.supair.com
Size choice
Preliminary test under hanging device

Harness User’s manual
SUP’AIR _DELIGHT2 Page 7SUP’AIR manufactures its harnesses in Europe. Most of the components used are Made in Europe.
7Accelerator 2B Speedbag
3D2 reserve parachute handle.
6Zicral 30 mm carabiners
5BUMPAIR 15 back D2
8Carbon fiber foot plate 25cm x 33 cm
Nomenclature
4MINI carbon fiber seatplate 30 x 22cm
9Rescue pocket volume adjustment system WEDGE 13
1Harness
2Removable Speedbag with integrated cockpit.
1
2
3
4
5
6
7
9
8

Harness User’s manual
SUP’AIR _DELIGHT2 Page 8SUP’AIR manufactures its harnesses in Europe. Most of the components used are Made in Europe.
Harness overview
1
8
11
10
12
13
9
2
3
4
5
7
6
Chest strap with automatic buckles
Safe-T-bar
Leg strap buckle
Chest strap adjustment
Backrest angle adjustment
Shoulder strap adjustment
Speedbag upper length adjustments
Slider panel.
Speedbag lower length adjustments
Speedbag carbon fiber foot plate.
Speedbag closing buckles
Rescue parachute handle
Rescue parachute pocket
Harken® Pulleys
1
2
3
4
5
6
Slider panel adjustment.
7
8
9
10
11
12
15
14
15
14
13

Harness User’s manual
SUP’AIR _DELIGHT2 Page 9SUP’AIR manufactures its harnesses in Europe. Most of the components used are Made in Europe.
accessories assembly
>> 1. SPEEDBAG
1
2
3
1
2
3
1
2
3

Harness User’s manual
SUP’AIR _DELIGHT2 Page 10SUP’AIR manufactures its harnesses in Europe. Most of the components used are Made in Europe.
>> 2. CARABINERS
>> 3. FOOT PLATE

Harness User’s manual
SUP’AIR _DELIGHT2 Page 11SUP’AIR manufactures its harnesses in Europe. Most of the components used are Made in Europe.
accessories assembly
Inner zoomed view
1. Open the pocket’s zipper located
beneath the seat.
2. Seperate the two flaps of the sup-
porting walls ( velcro ).
3. Insert the BUMPAIR with the thin
section first.
4. Position it between the reserve
parachute pocket wall and harness’s
backrest.
5. The lower BUMPAIR section must
rest against the supporting wall.
6. Close the supporting wall’s two
flaps by using the velcro strips.
7. Close the pocket beneath the seat.
8. Secure the BUMPAIR against the
wall by applying pressure from the
inside of the reserve parachute poc-
ket.
BUMPAIR 15 BACK D2 installation. :
Reference : SFBU011
>> 4. BUMPAIR