Tennsco MB-1-2542-MGY Instruction Manual

ASSEMBLY INSTRUCTIONS & PARTS MANUAL
RETAIN INSTRUCTIONS FOR FUTURE REFERENCE
PK-1610119
MB-1-2542-MGY
Mobile Maintenance Bench
Tennsco LLC. , Dickson, TN 37056-1888 • [phone]
GENERAL SAFETY INFORMATION
Some parts may have sharp edges. CARE must be taken when handling various pieces to avoid
injury. For safety, wear a pair of work gloves when assembling or performing any maintenance.
LIMITED WARRANTY
Tennsco warrants goods purchased hereunder to be free of defects in materials and workmanship for a period of one (1) year from the date of shipment, hereunder. This warranty shall not apply in
the event goods are damaged as a result of misuse, abuse, neglect, accident, improper application, modication or repair by persons not authorized by Seller, where goods are damaged during
shipment, or where the date stamps on the goods have been defaced, modied or removed. UNLESS CONSIDERED UNENFORCEABLE OR UNLAWFUL UNDER APPLICABLE LAW:
a. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY EXCLUDED:
b. BUYERS REMEDY, IF ANY, FOR ANY DEFECTIVE GOODS SHALL BE LIMITED TO A REFUND BY SELLER OR REPLACEMENT OF THE GOODS AT SELLER’S OPTION, AND SHALL IN NO
EVENT INCLUDE DAMAGES OF ANY KIND, WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE.
NO GOODS ACCEPTED FOR RETURN WITHOUT PRIOR APPROVAL. Seller shall have the right to inspect any goods claimed to be defective at Buyers place of business or require Buyer to return the
goods to Seller for inspection on Seller’s premises. Transportation charges covering returned goods will be borne by Seller only if such goods are proven to be defective, are covered by this warranty
and are returned within the warranty period stated above.

ASSEMBLY OF MB-1-2542 MOBILE MAINTENANCE BENCH
The only assembly required is attaching casters to the bench. Approximate assembly time: 5-10 minutes.
Tools required: slotted screwdriver and 7/16” wrench.
The reference numbers used throughout this sheet refer to the illustration on the back cover.
This is to help you to identify the various parts as they are mentioned.
1.
Place the cabinet (Ref. No. 1) upside
down on a clean, stable, non-marring surface.
3. Return the workbench unit to it’s upright position and lock the
brakes on the swivel casters.

2. Place casters (Ref. Nos. 9 and 10) over the bolt studs
provided on caster supports and attach with four Hex
Nuts (Ref. No. 15) and four Lockwashers (Ref. No. 16).
Tighten all the nuts securely.
4. To operate the caster brakes, press down on
the front of the brake with a foot to lock.
Then press down on the back of the brake
with a foot to unlock.
NOTE: Be sure to mount the swivel casters
together on the same end of the cabinet.


Push down
to lock
Push down
to unlock





REPLACEMENT PARTS
1 Cabinet Housing 052CH 1
2 Door 052D 1
3 Top 052ST 1
4 Masonite Work Surface 052WS 1
5 Adjustable Shelf (21”) 052S 1
6 Drawer 257DW 4
7 Drawer Divider WBDD-12 4
REF. NO. PART NO.
8 Suspension Slides (pair) SUSP-22 4
QUANITY
DESCRIPTION
9 Rigid Caster 052RC 2
10 Swivel Caster 052SC 2
11 Parts Tray (Optional) 976T 1
12 Locking Recessed Handle RH-1 1
13 Gear Lock w/keys 257GL 1
14 Gear Lock Retainer 257LR 1
15 1/4”-20 x 1/2” Hex Nut ** 16
16 1/4” Split Ring Lockwasher 16
REF. NO. PART NO. QUANITY
DESCRIPTION
**
1 2 3
4
567
8 9
11
10
12 13 14
NOTE: Additional hardware may be included for replacement purposes.
Tennsco makes every effort to ensure that all units ship complete with all parts and arrive undamaged.
However, should your unit contain missing or damaged parts, please contact your purchase location.
**Available Locally
49B161
Cabinet Housing
(Ref No. 1)
Door
(Ref No. 2)
Steel Top
(Ref No. 3)
Masonite Work Surface
(Ref No. 4)
Adjustable Shelf (21”)
(Ref No. 5)
Drawer
(Ref No. 6)
Drawer Divider
(Ref No. 7)
Drawer Suspension Slides
(Ref No. 8)
Swivel Caster
(Ref No. 10)
RH-1 w/keys
(Ref No. 12)
Parts Tray (Optional)
(Ref No. 11)
Gear Lock w/keys
(Ref No. 13)
1/4”-20 x 1/2”
Hex Nut
(Ref No. 15)
1/4” Split Ring
Lockwasher
(Ref No. 16)
15 16
Rigid Caster
(Ref No. 9)
Gear Lock
Retainer
(Ref No. 14)