supremo LEISURE Barcelona Cushion Box User manual

Before you begin the assembly of your new purchase please read instrucons carefully:
PRODUCT ASSEMBLY
1.Please check all components listed are counted and correspond to the required parts for building the
product (should there be anything missing please contact your retailer or )[e-mail]
2.This Product should be assembled by 2 people.
3.NEVER USE A POWER TOOL TO ASSEMBLE.
4.To ensure your product is not damaged during assembly, prepare a suitable area to build your furniture,
either assemble on a clean soft surface (like a carpet) or use the box the products have been supplied in.
This will prevent your product from damage / scratching to the materials used when building the furniture.
5.To begin the assembly, follow the diagrams in order sequence as directed to ensure the correct method is
followed for correct installation of each component. DO NOT tighten any bolts up until all parts have been
connected loosely with all bolts inserted into position, once all parts are connected, then each bolt can be
fully tightened using the tools provided.
6.Thank you for purchasing a Supremo product and we wish you many years of enjoyment using your garden
furniture.

M6*35
Side Panel left
Hand
Side Panel Right
Hand
Bottom Panel
Hinged Lid
Front Panel
Rear Back Panel
Spanner
Allen Key
All bolt once inserted can be tightened up at this point
QInternal
Liner 1
Q
5
Unfold the internal liner (Part Q) and insert the whole
bag inside the cushion box, holding the Velcro strip of
the liner in your hand(s) and start in the rear corner(s)
of the cushion box with the corner of the liner, and
attached the Velcro to the fixed Velcro strips on the top
inner edge of the cushion box, continue to attached until
all of the liner has been firmly attached.