Surefire E2D Defender Tactical User manual

SINGLE-OUTPUT LED FLASHLIGHT
USER MANUAL
Revision A 10-2018
71-01-1077
E2DLU-T
E2D DEFENDER TACTICAL
OUTPUT 1,000 lumens
RUNTIME 2.75 hours
PEAK BEAM INTENSITY 10,600 candela
DISTANCE 200 meters
CONSTRUCTION Aluminum
FINISH Mil-Spec Hard Anodized
WEIGHT (w/batteries) 4.2 oz (119 g)
LENGTH 5.6 in (14.2 cm)
BEZEL DIAMETER 1.125 in (2.85 cm)
BATTERIES Two 123A lithium (incl.)
SWITCHING Click tailcap
All performance claims tested to ANSI/NEMA FL1-2009 Standard.
SPECIFICATIONS
MAINTENANCE
Wipe with a clean, dry cloth. For tips on maintaining your SureFire
illumination tool, visit www.surefire.com/faqs-maintenance.
ACCESSORIES
SureFire makes a full line of accessories for most of its illumination tools.
For a complete listing, visit www.surefire.com/parts-accessories.
THE SUREFIRE NO-HASSLE GUARANTEE
We’ll do what it takes to keep your SureFire gear running smoothly. SureFire
warrants that if you — our customer — purchase one of our products, and we
determine that it is defective in material and/or workmanship during your lifetime,
we will repair or replace it — no hassle!
Our warranty does not cover consumables or normal wear-and-tear — things like
batteries draining, headbands and headpads wearing out, ink cartridges running
out, and switches wearing out — or damage resulting from abuse, alterations,
unauthorized repairs, or use contrary to SureFire’s user manuals.
Should you need a replacement product, SureFire reserves the right to replace an
obsolete product with a current production, like model. In the event that any issue
with a SureFire product is not covered under this warranty SureFire can arrange to
have the product repaired for a reasonable fee.
STANDARD DISCLAIMER
Except as specified above or prohibited by applicable law: all express or implied
conditions and warranties, including, without limitation, any implied warranty
or condition of merchantability or fitness for a particular purpose, or accuracy of
any informational content, are hereby excluded and disclaimed by SureFire; and
in no event will SureFire be liable for any special, direct, indirect, consequential,
incidental or punitive damages howsoever arising and regardless of the theory
of liability, even if advised of the possibility of such damages. Products, prices,
availability, specifications, and offers are subject to change or cancellation at any
time without notice.
WARRANTY CLAIMS
For claims, contact Customer Service at 714-545-9444 to obtain a Return
Merchandise Authorization number (RMA#). Then package the unit carefully and
send to (no CODs):
SureFire, LLC.
Repairs Department, RMA#____
17680 Newhope Street, Suite B
Fountain Valley, CA 92708
SureFire will pay any reasonable shipping costs to return the unit to you.
®
18300 MT. BALDY CIRCLE
FOUNTAIN VALLEY, CA 92708-6122
WWW.SUREFIRE.COM
Patents: 6547415, 6222138, RE40125

LOCKOUT TAILCAP (US PAT. RE40125)
Most SureFire illumination tools feature a lockout tailcap, which prevents
accidental activation during storage or transport. The tailcap may need
to be enabled prior to light operation.
To enable, rotate tailcap clockwise until light activates when tailcap
pushbutton is pressed.
To lock out tailcap, rotate counterclockwise until light will not
activate when pushbutton is pressed.
LIGHT OPERATION
ENABLE
DISABLE
PRESS OR CLICK
TO ACTIVATE
®
BATTERY REPLACEMENT
Most SureFire illumination tools ship preloaded with
batteries. To load or replace batteries:
1. Unscrew head counterclockwise and remove.
2. Remove old batteries and dispose of properly.
3. Insert two new 123A lithium batteries with positive (+)
terminals oriented forward.
4. Replace head by screwing on clockwise.
BATTERY INFORMATION & WARNINGS
For complete battery information and warnings, reference the enclosed
BATTERY INFORMATION / WARNING insert in your illumination tool’s
original packaging or visit www.surefire.com/batteries.

DUAL-OUTPUT LED FLASHLIGHT
USER MANUAL
18300 MT. BALDY CIRCLE
FOUNTAIN VALLEY, CA 92708-6122
WWW.SUREFIRE.COM
Patents: 6547415, 6222138, RE40125
Revision A 10-2018
71-01-1078
E2DLU-A
E2D DEFENDER
OUTPUT High: 1,000 Low: 5 lumens
RUNTIME High: 2.75 Low: 63 hours
PEAK BEAM INTENSITY 10,600 candela
DISTANCE 200 meters
CONSTRUCTION Aluminum
FINISH Mil-Spec Hard Anodized
WEIGHT (w/batteries) 4.2 oz (119 g)
LENGTH 5.6 in (14.2 cm)
BEZEL DIAMETER 1.125 in (2.85 cm)
BATTERIES Two 123A lithium (incl.)
SWITCHING Click tailcap
All performance claims tested to ANSI/NEMA FL1-2009 Standard.
SPECIFICATIONS
MAINTENANCE
Wipe with a clean, dry cloth. For tips on maintaining your SureFire
illumination tool, visit www.surefire.com/faqs-maintenance.
ACCESSORIES
SureFire makes a full line of accessories for most of its illumination tools.
For a complete listing, visit www.surefire.com/parts-accessories.
THE SUREFIRE NO-HASSLE GUARANTEE
We’ll do what it takes to keep your SureFire gear running smoothly. SureFire
warrants that if you — our customer — purchase one of our products, and we
determine that it is defective in material and/or workmanship during your lifetime,
we will repair or replace it — no hassle!
Our warranty does not cover consumables or normal wear-and-tear — things like
batteries draining, headbands and headpads wearing out, ink cartridges running
out, and switches wearing out — or damage resulting from abuse, alterations,
unauthorized repairs, or use contrary to SureFire’s user manuals.
Should you need a replacement product, SureFire reserves the right to replace an
obsolete product with a current production, like model. In the event that any issue
with a SureFire product is not covered under this warranty SureFire can arrange to
have the product repaired for a reasonable fee.
STANDARD DISCLAIMER
Except as specified above or prohibited by applicable law: all express or implied
conditions and warranties, including, without limitation, any implied warranty
or condition of merchantability or fitness for a particular purpose, or accuracy of
any informational content, are hereby excluded and disclaimed by SureFire; and
in no event will SureFire be liable for any special, direct, indirect, consequential,
incidental or punitive damages howsoever arising and regardless of the theory
of liability, even if advised of the possibility of such damages. Products, prices,
availability, specifications, and offers are subject to change or cancellation at any
time without notice.
WARRANTY CLAIMS
For claims, contact Customer Service at 714-545-9444 to obtain a Return
Merchandise Authorization number (RMA#). Then package the unit carefully and
send to (no CODs):
SureFire, LLC.
Repairs Department, RMA#____
17680 Newhope Street, Suite B
Fountain Valley, CA 92708
SureFire will pay any reasonable shipping costs to return the unit to you.
®

LOCKOUT TAILCAP (US PAT. RE40125)
Most SureFire illumination tools feature a lockout tailcap, which prevents
accidental activation during storage or transport. The tailcap may need
to be enabled prior to light operation.
To enable, rotate tailcap clockwise until light activates when tailcap
pushbutton is pressed.
To lock out tailcap, rotate counterclockwise until light will not
activate when pushbutton is pressed.
LIGHT OPERATION
Press or click tailcap switch once for high output. Return to off and press
or click on again, within two seconds, for low output.
BATTERY REPLACEMENT
Most SureFire illumination tools ship preloaded with
batteries. To load or replace batteries:
1. Unscrew head counterclockwise and remove.
2. Remove old batteries and dispose of properly.
3. Insert two new 123A lithium batteries with positive (+)
terminals oriented forward.
4. Replace head by screwing on clockwise.
BATTERY INFORMATION & WARNINGS
For complete battery information and warnings, reference the enclosed
BATTERY INFORMATION / WARNING insert in your illumination tool’s
original packaging or visit www.surefire.com/batteries.
ENABLE
DISABLE
PRESS OR CLICK
TO ACTIVATE
®