Surefire TITAN PLUS User manual

TITAN®PLUS
ULTRA-COMPACT TRIPLE-OUTPUT LED FLASHLIGHT
TITAN-B
USER MANUAL
Specifications TITAN PLUS (B)
Output* (low / high) 15 / 75 / 300 lumens
Intensity 1,100 candela
Runtime* (low / high) 7 / 2 / 1 hrs.
Weight 2.0 oz. (58 g)
Length 3.375 in. (8.6 cm)
Bezel Diameter .58 in. (1.47 cm)
All performance claims tested to ANSI/NEMA FL1-2019 Standard.
*Using included rechargeable NiMH battery
THE SUREFIRE NO-HASSLE GUARANTEE
We’ll do what it takes to keep your SureFire gear running smoothly. SureFire
warrantsthat if you—our customer—purchase one of our products, and we determine
that it is defective in material and/or workmanship during your lifetime, we will repair
or replace it—no hassle! Rechargeable batteries and chargers are warranted for two
years from the date of purchase. SureFire hearing-protection products are warranted
for 90 days from the date of purchase. Our warranty does not cover consumables
or normal wear-and-tear, or damage resulting from abuse, alterations, unauthorized
repairs, or use contrary to SureFire’s user manuals. To help protect your investment
SureFire offers reasonable rates to repair damage to our products not covered by our
warranty, such as a core rebuild for a suppressor damaged by improper use. You will
be provided with a quote for approval before work begins.
STANDARD DISCLAIMER
Except as specified above or prohibited by applicable law: all express or implied
conditions and warranties, including, without limitation, any implied warranty or
condition of merchantability or fitness for a particular purpose, or accuracy of any
informational content, are hereby excluded and disclaimed by SureFire; and in no
event will SureFire be liable for any special, direct, indirect, consequential, incidental
or punitive damages howsoever arising and regardless of the theory of liability, even if
advised of the possibility of such damages. Products, prices, availability, specifications,
and offers are subject to change or cancellation at any time without notice.
WARRANTY CLAIMS
For claims, contact Customer Service at 714-545-9444 to obtain a Return
Merchandise Authorization number (RMA#). Then package the unit carefully
and send to (no CODs):
SureFire, LLC.
Repairs Department, RMA#___
17680 Newhope Street, Suite B
Fountain Valley, CA 92708
SureFire will pay any reasonable shipping costs to return the unit to you.
18300 MT. BALDY CIRCLE
FOUNTAIN VALLEY, CA 92708-6122
SUREFIRE.COM
Revision F 7-2022
71-01-964
TITAN-B

MAINTENANCE
Use a clean, dry cloth to wipe off body and window. Periodically clean and
lubricate threads and O-rings using a thin coat of non-migrating, silicon-based
lubricants. Avoid using petroleum-based lubricants that can damage O-rings. For
additional tips on maintaining your SureFire illumination tool, visit
www.surefire.com/faqs-maintenance.
ACCESSORIES
SureFire makes a full line of accessories for most of its illumination tools. For a
complete listing, visit www.surefire.com/partsaccessories.
3. Insert new or freshly charged NiMH battery–or a new disposable AAA alkaline or
AAA lithium battery–with positive (+) terminal oriented toward bezel.
4. Replace bezel by screwing on clockwise until it stops turning. Test by
turning on flashlight.
NOTE: AAA lithium batteries can also be used but runtime will be reduced.
Do not use alkaline batteries.
RECHARGING NiMH BATTERY
Your included Titan’s NiMH battery is rechargeable. To recharge the NiMH battery,
follow the directions of your NiMH-specific charger (not included).
WARNING: Use only a NiMH-compatible charger to charge NiMH batteries.
NEVER attempt to charge disposable AAA alkaline batteries.
Pocket Clip Removal
Remove the rear cap of body by rotating it counterclockwise. Remove O-ring. Slide
the pocket off of the light body and store it somewhere safe. Re-install O-ring.
Re-install the rear cap by rotating clockwise until secure.
KIT CONTENTS
TITAN PLUS:
• One AAA NiMH battery (installed)
• Pocket clip
LIGHT OPERATION
TITAN PLUS: With head facing away from you, rotate the bezel counterclockwise to
activate the 15-lumen low-output setting. Rotate head clockwise to return to “off”
and then rotate counterclockwise again, within one second, to activate the 75-lumen
medium-output setting. Repeat process a third time, within one second, to activate
300-lumen high-output setting.
BATTERY INSTALLATION / REPLACEMENT
Titan Plus flashlights ship with pre-loaded battery.
To load or replace battery:
1. Unscrew bezel (head) counterclockwise and remove.
2. Remove old battery and dispose of properly.
TITAN®PLUS