Surefire Stiletto PLR-A User manual

THE SUREFIRE NO-HASSLE GUARANTEE
We’ll do what it takes to keep your SureFire gear running smoothly. SureFire
warrants that if you — our customer — purchase one of our products, and we
determine that it is defective in material and/or workmanship during your lifetime, we
will repair or replace it — no hassle!
Our warranty does not cover consumables or normal wear-and-tear — things like
batteries draining, headbands and headpads wearing out, ink cartridges running
out, and switches wearing out — or damage resulting from abuse, alterations,
unauthorized repairs, or use contrary to SureFire’s user manuals.
Should you need a replacement product, SureFire reserves the right to replace an
obsolete product with a current production, like model. In the event that any issue with
a SureFire product is not covered under this warranty SureFire can arrange to have
the product repaired for a reasonable fee.
STANDARD DISCLAIMER
Except as specified above or prohibited by applicable law: all express or implied
conditions and warranties, including, without limitation, any implied warranty or
condition of merchantability or fitness for a particular purpose, or accuracy of any
informational content, are hereby excluded and disclaimed by SureFire; and in no
event will SureFire be liable for any special, direct, indirect, consequential, incidental
or punitive damages howsoever arising and regardless of the theory of liability, even if
advised of the possibility of such damages. Products, prices, availability, specifications,
and offers are subject to change or cancellation at any time without notice.
WARRANTY CLAIMS
For claims, contact Customer Service at 714-545-9444 to obtain a Return
Merchandise Authorization number (RMA#). Then package the unit carefully
and send to (no CODs):
SureFire, LLC.
Repairs Department, RMA#____
17680 Newhope Street, Suite B
Fountain Valley, CA 92708
SureFire will pay any reasonable shipping costs to return the unit to you.
MULTI-OUTPUT RECHARGEABLE POCKET LED FLASHLIGHT
PLR-A
USER MANUAL
18300 MT. BALDY CIRCLE
FOUNTAIN VALLEY, CA 92708-6122
SUREFIRE.COM
Revision D 08-2019
71-01-1058
PLR-A
PLR-A Line Art
.79
20.1
"
4.41
112.0
"
1.60
40.5
"
1.32
33.4
"
STILETTO
OUTPUT Low: 5 Med: 250 High: 650 lumens
RUNTIME Low: 30 Med: 2 High: 1.75 hours
STROBE RATE Tactical Switch: 9 Emergency: 3-4 Hz
PEAK BEAM INTENSITY 1,530 candela
DISTANCE 78 meters
CONSTRUCTION Aluminum / Polymer
FINISH Black
WEIGHT (w/batteries) 2.8 oz (79 g)
LENGTH 4.45 in (11.3 cm)
BEZEL DIAMETER 0.8 in (2.03 cm)
BATTERIES Lithium polymer rechargeable (integrated)
SWITCHING Primary, Tactical, and Programming
LIQUID INGRESS
PROTECTION
IPX7
All performance claims tested to ANSI/NEMA FL1-2009 Standard.
SPECIFICATIONS
Do not attempt to remove or replace the STILETTO battery. Doing so
will void the warranty. If the STILETTO needs to be repaired, contact
Surefire at 714-545-9444 or [email protected].
BATTERY INFORMATION & WARNING

KIT CONTENTS
• STILETTO
• USB-TO-MICRO USB cable
LIGHT OPERATION - PROFILE CONFIGURATION
The STILETTO has three switches (PRIMARY, PROGRAMMING AND TACTICAL).
PRIMARY switch: activates the light in the various outputs
PROGRAMMING switch: see “HOW TO CHANGE PRIMARY AND TACTICAL MODES”
TACTICAL switch: for momentary, strobe or constant-on output
Primary Switch Activation
Mode 1 (Default): Press the PRIMARY switch to cycle from LOW to MEDIUM to HIGH to
OFF. The cycle will repeat if the PRIMARY switch is pressed within two seconds. If the
STILETTO is activated on either LOW, MEDIUM or HIGH and the PRIMARY switch has not
been pressed within two seconds, the next press shuts the light OFF. The last used output
is not remembered.
Mode 2: Same as above, but with the cycle changed to HIGH to MEDIUM to LOW to OFF.
Tactical Switch Activation
Mode 1 (Default ; TACTICAL & STROBE): Press and hold the TACTICAL switch for HIGH only;
release the switch to shut OFF. For STROBE, rapidly tap the TACTICAL switch three or more
times and hold down on the 3rd+ press. Release the switch to shut the STROBE OFF.
Mode 2 (Constant-on): Press the TACTICAL switch for constant-on in HIGH only. When the
switch is pressed again, the light will shut OFF.
EMERGENCY MODE Activation
Press and hold the PROGRAMMING switch for five seconds or more to activate the MEDIUM
frequency, MEDIUM output STROBE. Press the PRIMARY or TACTICAL switch to shut
EMERGENCY MODE OFF.
HOW TO CHANGE PRIMARY AND TACTICAL MODES
The PROGRAMMING switch is used to select the behavior of the PRIMARY and TACTICAL
output buttons. The STILETTO must be off to change modes. The PRIMARY and
TACTICAL switches are changed independently (Ex: PRIMARY switch can be on MODE 1
and TACTICAL switch can be on MODE 2.)
Changing the modes for either the PRIMARY or TACTICAL switches:
Step 1: Press and hold the PROGRAMMING switch for two to five seconds. The Fuel
Gauge LED will illuminate BLUE to indicate programming mode.
Step 2: While holding the PROGRAMMING switch and observing the BLUE LED Fuel
Gauge, tap either the PRIMARY or TACTICAL switch once and release the
PROGRAMMING switch. Pressing the PRIMARY or TACTICAL switch more than
ONCE exits the programming mode. Once the PROGRAMMING switch is released,
the Fuel Gauge LED blinks GREEN three times for success or RED three times
for error.
FUEL GAUGE
The STILETTO is equipped with a LED that displays the battery status, both during use and
while charging.
CHARGING THE STILETTO
The STILETTO is powered by an integral lithium polymer (LiPo) battery (950 mAh).
The STILETTO’s MICRO USB port is for charging input only (Standard 5V, 500 mA).
How to charge the LiPo rechargeable battery:
1. Insert the MICRO USB cable plug into STILETTO charging port.
2. Insert USB cable plug into a USB port of a computer or another device that will provide
power to the STILETTO.
3. When the fuel gauge turns green, the STILETTO is charged to more than 95% of
battery capacity.
NOTE: The SureFire FIREPAK™ and GUARDIAN
®
will charge the STILETTO approximately
two times.
NOTE: Charging a fully depleted battery can take up to three hours. The light may be left
plugged into the charger without damaging the battery.
NOTE: When the
STILETTO is being charged and the temperature is too cold (Below
32°F/0°C) or too hot (Above 120°F/50°C), the fuel gauge will blink yellow which indicates
charging stopped. Once the temperature reaches 41°F/5°C or 113°F/45°C, it will continue
charging. When the battery is drained below 3.0V, the STILETTO has a pre-charge mode
when connected to a charger. The Fuel Gauge will blink red rapidly until the battery reaches
3.1V. Once the battery has a minimum of 3.1V, the Fuel Gauge conditions above will apply.
LOCKOUT MODE
FUEL GAUGE LED INDICATOR
CHARGING DISCHARGING
SOLID GREEN 100% Charged, Max Capacity 95-100% Charged
SOLID YELLOW Charging, Medium Capacity Battery Charge Low (reduce light
output level or recharge)
SOLID RED Charging, Low Capacity Recharge Immediately
FLASHING RED Pre-charge mode Battery Critically Low
PLR-A Line Art
.79
20.1
"
4.41
112.0
"
1.60
40.5
"
1.32
33.4
"
PRIMARY
SWITCH
MICRO-USB
PROGRAMMING
SWITCH
FUEL GAUGE LED
TACTICAL
SWITCH
STROBE WARNING
Exposure to strobing lights may cause dizziness, disorientation, and nausea. A very
small percentage of people suffer from photosensitive epilepsy—approximately
.00025% of the population—and may experience seizures or blackouts triggered by
strobing lights. Visit www.epilepsyfoundation.org for more information about this rare
form of epilesesy. Anyone who has had symptoms linked to this condition should consult
a doctor before using this product.
To Enable Lockout Mode
1. Press and hold the PRIMARY and TACTICAL switch simultaneously for two seconds, then release.
2. The green Fuel Gauge LED will blink twice to confirm Lockout Mode is enabled.
NOTE: The PRIMARY, TACTICAL and PROGRAMMING switches will not activate the
STILETTO when Lockout Mode is enabled.
To Disable Lockout Mode:
1. Press the PRIMARY and TACTICAL switch simultaneously, then release.
NOTE: The PRIMARY, TACTICAL and PROGRAMMING switches will be instantly ready for
use when Lockout Mode is disabled.