Suresafe SH-055UN7 User manual

1/4
zVERSATILE & WIDE FREQUENCY RANGE
This device is a VERSATILE RF signal detector which can detect all the wireless (RF Radio
Frequency) devices during 50 MHz ~ 6.0 GHz, including GSM phone, 3G / 4G smartphone,
standby registration signal, WiFi, wireless bug (hidden microphone), wireless analog &
digital cameras, IP camera, signal jammers and, new bug and new spy camera remote
controlled by cellphone.
zPOWER-ON SELF-TEST
1. All the LEDs of this device will be lit up every time this device is switched on.
2. Then the 8-LED Signal strength indications will be put out one-by-one.
3. Other LEDs will also put out, only remaining Power and Beep LED.
4. This is the self-test of all functions.
SH-055UN7
Multi use
RF Bug Detector

2/4
z8-LED SIGNAL STRENGTH INDICATION
The 8-LED bar will light up according to the signal
strength from green Æyellow Æred, stronger
signal, more LED.
zCLEAR INDICATION OF SETTING, SIGNAL TYPE & BATTERY STATUS
Clear LED indication of all functions
No. ITEM DESCRIPTION
1 Power Switch on
2 Vibration Vibration warning mode (manual shift)
3 Beep Beep sound warning mode (Default)
4 Acoustic Identification for audio signal (manual shift)
5 CAM / Bug / LTE Analog and Spread spectrum signal of
Camera, bug and cellphone
6 WiFi Digital signal of WiFi and IP camera
7 Battery low Battery power running down
8 Charging Status of battery charging
z3 WARNING MODES
Press the 2 buttons in left side of front view of this device to change
the warning mode. Default setting is beep.
1. Vibration
2. Beep (Default)
3. Acoustic: Identification for audio signal
1.
2.
3. 6.
5.
8.
4. 7.

3/4
zAUTO INDICATION OF SIGNAL TYPE
This device will indicate detected signal automatically.
1. CAM / BUG / LTE : Analog and Spread spectrum
signals of wireless camera, wireless bug, signal
jammer and 2G / 3G / 4G cell phones, etc..
2. WiFi: Digital signals of WiFi, IP camera, wireless digital camera, etc.
zBATTERY & CHARGING STATUS
1. Battery Low : Warning of battery power running down.
2. Charging: Indicate the status of battery charging. When starts charging, indication lights
up in red as quick charging, when charging to about 70%, it will change to slow charging,
the indication shift to green.
zSTILL FIND OUT BUG IN SILENT PLACE
All others’ audio receiver can not help you to find where the bug is, also can not display any voice if
none is talking.
This device can find bug in silent place. It has a sensitivity tuner. When detected signal, user can
lower the sensitivity a little and a little, and then approach gradually to find the signal source.
zUNIQUE ACOUSTIC DISPLAY
Some companies supply bug detector, but none of them has acoustic display. Furthermore, they are
just signal detectors for lower frequency band less than 500 MHz.
This device has three kinds of warning modes: Beep, Vibration and Acoustic. After detected signal,
set the warning mode to Acoustic to hear and identify if it is audio signal.
zNO INTERFERENCE WITH RADIO STATION
The audio receivers have good ability in audio signal, so you will hear a lot of radio station programs
during your scan. Those audio receivers seem high priced radio. It makes your scan annoying and
complicated, you will miss the real bug signal easily.
This device will not mistake the radio station signal for bug signal. The radio station programs will
not distract you from your scan job.
zSUPPORT POWER BANK FOR LONG TIME USE
This device has Mini USB port for connecting power bank for
long time use or charging the battery.

4/4
z STANDBY / IDLE PHONE REGISTRATION DETECTION
When the signal strength of cell site weakens, the cellphone will re-scan the cell site to do
new registration automatically. Or the cell site will initiate registration on its own by sending
a signal to the cell phone causing the phone to transmit and identify itself.
This device can detect the standby / idle phone when it does registration with the cell site.
The interval time and number of times of registration is different among different networks
and cell phones.
zSENSITIVITY (DISTANCE) & VOLUME TUNER
This device has two tuners for user to adjust sensitivity (SENS.) and
volume (VOL.).
1. SENS.: Adjust the detecting distance and eliminate environment
noise. But in Acoustic mode, this tuner is tuning for signal in better
receiving.
2. VOL. : Volume adjustment of beep and audio signal.
Specification * specification may change without prior notice.
Detecting range 50 MHz ~ 6.0 GHz
Dimension L 11.6 x W 7 x T 3.3 cm (not include antenna)
Weight About 170g (not include battery)
Power 1. 5V DC switching power adaptor
2. AAA / UM-4 rechargeable battery or dry battery x 4
Warning mode 1. LED indication 2. Beep alarm sound 3. Acoustic display 4. Vibration
5. Earphone silent detection
Sensitivity Tuner 1. Adjust detecting distance to find signal source
2. Eliminate the environment interference
up to 25 feet (beep)
Wireless bug (2mW) up to 15 feet (acoustic)
10mW 2.4GHz Wireless camera up to 15 feet
10mW 5.8GHz Wireless camera up to 4 feet
GSM Cell phone up to 50 feet
Smartphone up to 13 feet
Detecting Distance
3G 2100 cell network up to 3 feet
* The detecting distance of wireless (RF radio frequency) device will be varied depending on its
output signal strength.
Siangsiu Industrial Corp. / Suresafe Technology Inc.
11F-1, No. 29, Sec. 3, Roosevelt Road, Taipei, Taiwan 106
Tel: [phone] Fax: [phone]
Email: [email protected].net Web: www.suresafe.com.tw