Swann FlashlightDVR SW244-TDV User manual

FlashlightDVR™
USER MANUAL
SW244-TDV

2
Before You Begin
READ THESE INSTRUCTIONS BEFORE USEAND RETAIN FOR FUTURE REFERENCE.
WARNING: Important notice about correct usage of the power adapter
The correct orientation for the enclosed power adapter is in a vertical or floor mount position.
FCC WARNING STATEMENT
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation
Important Notice
All jurisdictions have specific laws and regulations regarding the use of cameras. Before using
any camera for any purpose, it is the buyer’s responsibility to be aware of all applicable laws and
regulations that prohibit or limit the use of cameras and to comply with the applicable laws and
regulations. The legality of watching people other than yourself changes from country to
country and even state to state. Contact your local government’s privacy information body or
your local Police for more information on what if any restrictions you may face.
Technical Support
Swann Technical Support is available for any inquiries you may have.
Website: www.swannsecurity.com
USA/Canada: 1-800-627-2799, 1-877-274-3695
Australia: 1300 13 8324
Email: [email protected]

3
I. Introduction
Thank you for purchasing the Swann FlashlightDVR™. This manual details the operation
of the product. Please read it carefully and keep it for future reference.
The Swann FlashlightDVR is an innovative ALL-IN-ONE PORTABLE solution for
Flashlight, Camera and Digital Video Recorder. It is ideal for instant MPEG4 Video
Recording for Security Applications.
II. Features
- High powered White LED flashlight
- Highly Durable with precision tooled aluminum housing
- Compact size and portable DVR System
- Support up to 2GB external Mini SD Card flash storage
- MPEG4 Video Recording
- Support 1.5 Hours VGA recording with 1 GB Mini SD card
- Built-in CMOS Color VGA Sensor (640x480)
- Night Vision support
- Backup using USB1.1 compatible interface
- Easy operation with one touch control
- LCD Status Display with backlight
- Clock Display
- Built-in Ni-MH Charger (12V input)
III. Package Contents
1 x FlashlightDVR
1 x USB Cable
1 x User Manual
1 x 12V AC-DC Adaptor for Charging
1 x Charger for Cigarette Adapter

IV. FlashlightDVR Layout
V. Before Use
Remove the end cap of the FlashlightDVR™ and install 3 C-size Ni-MH rechargeable
batteries or 3 C-size alkaline batteries (not included). Tighten the end cap after installing
the batteries.
4

VI. FlashlightDVR™ Control Panel
There are 4 buttons on the control panel as below:
1. Flashlight button
2. Function button
3. Record button
4. Snapshot button
VII. LCD Display
5

VIII. Modes of Operation
1) Time/Date Setup
When batteries are installed in the unit, the Time Display Mode appears as shown
below:
A. Date Display
Press Function button to enter Date Display mode. By default,
2007-January-01 will display as below:
Press the Function button again to go back to Time Display mode.
B. Time Adjustment
In Time Display mode, hold the Function button for 2 seconds to enter the
Time edit mode. The number indicating Hour will flash and can be edited
using and buttons. Press button will increase the number by 1
while press button will decrease by 1. Press the Function button to
move to change the Minutes. Use the and buttons to change the
minutes. Press the Function button to edit the Seconds.
Once all adjustments are complete, press the Function button to save all
changes and return to Time Display Mode.
C. Date Adjustment
When viewing the date, press and hold the Function button for 2 seconds
to enter the Date edit mode. The number indicating the Year will flash and can
be changed using and buttons. Press button will increase the
number by 1 while press button will decrease by 1. Press the Function
button to change to Month edit. Use the arrows as above. Press the
Function button again to change to Day edit and use the arrows to adjust.
When you have finished making changes press the Function button again
to save and exit Date Adjustment mode.
6

2) Battery Indicator
The battery indicator appears in the upper left area of
the display. When the indicator is empty the
FlashlightDVR™ will no longer function properly and
requires charging or battery replacement (if using
alkaline batteries).
One bar indicates the batteries are low and require
charging or replacement as soon as possible.
7
The battery level is normal and will have 2 slots lit up
on the Battery Indicator.
A full Battery Indicator indicates the battery is fully
charged and ready for use.
3) Flashlight
The unit has 3 levels of brightness, Low, Medium and High.
When batteries are installed in the unit the flashlight defaults to OFF mode.
Press Flashlight button repeatedly to cycle through the various brightness
levels:
Low Medium High
 
OFF
4) Using a Mini-SD Card
The FlashlightDVR supports 128MB to 2GB Mini-SD Cards. When the Mini-SD Card
is installed the unit will automatically select the Mini-SD Card as the storage media.
If Mini-SD Card is not installed the unit will use the internal 100MB out of 128MB
memory for Video and Snapshot storage.

Insert the Mini-SD card into the Min-SD card slot as shown below. Please make
sure the orientation of Mini-SD card is correct.
5) Snapshot Mode
To enter the snapshot mode, press and hold the button for 2 seconds. The
LCD will display the SD Card data indicator and flash for approximately 10 seconds:
After the data indicator disappears, the unit enters snapshot mode, with the LCD
displaying 0 as below:
8

Point the camera to the object and then press button to take a photo. The data
indicator will flash under the SD logo:
Once the DVR has finished processing the image, a number 1 will appear under
REC indicating 1 picture has been saved:
Press button again to take a second picture. The data indicator will flash and
REC will indicate 2 pictures have been stored:
If you want to quit snapshot mode, Press and hold the button for 2 seconds to
return to Time display.
NOTE: When taking photos at night, ensure the flashlight level is set to off in order
for infrared LEDs to turn on. Taking photos with the light on will overexpose the
image and appear as a white image
9

6) Video/Audio Recording
To enter the video/audio recording mode, press and hold button for 2 seconds.
The LCD will display the SD Card data indicator and will flash for approximately 10
seconds:
After the data indicator disappears, the unit enters the video/audio recording mode,
with LCD displaying 0 as below:
Point the FlashlightDVR at an object and then press the button to start the
video/audio recording. The data indicator will flash under the SD logo:
Once the data indicator disappears the video will begin to record and the timer will
start counting:
10