Swann 4-4350 User manual

1
DVR Quick Start Guide
QH_484350140416E | © Swann 2016
Welcome! Lets get started.
READ ME
FIRST!
To start using your DVR, you need the following -
1. A high-definition TV capable of displaying 720p
or 1080p video. Look at the ports on the back of
your TV to make sure it has an HDMI input.
2. A router with a broadband Internet connec-
tion.
3. A mobile device (Android or iOS) to download
the free SwannView Link app.
Carefully unpack each item and discard any
packaging not required.

2
Congratulations on the purchase of your Swann DVR. This quick start guide will assist you on getting your DVR up and
running as soon as possible. We recommend that you connect everything and give it a try before you do a permanent
installation, to make sure nothing was damaged during shipping. On the other side is a detailed connection map which
illustrates the various connections on the DVR.
Getting to know your DVR
1) Camera Inputs
2) HDMI Port
3) VGA Port
4) Audio In Port
5) Audio Out Port
6) Ethernet Port
7) USB Ports
8) Power Port
9) Power LED
10) Hard Drive
LED
11) Network LED
VIDEO IN VGA AUDIO LAN & USB 12V
ININININ
OUT
1
2
3
4
5
6
7
8
1 2 3 5 7 8
4 6
PWR HDD
8 Channel Digital Video Recorder
NET
9
10
11
Look out for the light bulb icon, as
this provides tips on the operation of
your DVR.
Your DVR is designed to ventilate air to
keep it at an optimal temperature. Keep
your DVR free from obstructions to allow
it to ventilate properly.

3
What does this mean?
1) Camera Inputs - Connect your cameras here. Twist the
video connection to lock it in place.
3) HDMI Port - Connect this to your TV with a HDMI input
(HDMI cable supplied).
2) VGA Port - Connect this to your monitor with a VGA
input (VGA cable not supplied). This is not required when
using the HDMI port.
4) Audio In Port - For connecting a microphone (the
microphone must have its own power source).
5) Audio Out Port - For connecting to a stereo or amplifier.
This is not required when using the HDMI port.
6) Ethernet Port - Connect this to your router so your DVR
can connect to the Internet.
7) USB Ports - Connect the mouse here. You can also
connect a storage device such as a USB flash drive to copy
recorded events or to perform a firmware upgrade.
8) Power Port - Connect the DC 12V power adapter here.
9) Power LED - Indicates your DVR has power.
10) Hard Drive LED - Flashes when the hard drive is active.
11) Network LED - Flashes when there is network activity.
As your DVR is designed to be always on, there is no
power button. To turn off your DVR, use the Shutdown
function then disconnect the power adapter.

4
Step One - Connect your Cameras
1. Connect the video output and power
input connection on the camera to the
corresponding connections on the
supplied video & power cable.
2. Connect the supplied power
splitter to the other end of the video
& power cable. This provides power
to multiple cameras using a single
power adapter.
3. Connect the other end of the power
splitter to the supplied power adapter
then connect the power adapter to a
power outlet.
4. Connect the video output on the
video & power cable to each camera
input on the DVR. Twist the connection
to lock it in place.
2 3
Power Adapter
Power Input
Video Output
1
Twist to lock
connectors
Video Input
Video & Power Cable
Connect this to the DVR
Power Splitter
connects here
Power Output
Power Adapter
connects here
Power Splitter
Video & Power Cable
connects here
Connect to a spare
wall socket
VIDEO IN VGA AUDIO LAN & USB 12V
ININININ
OUT
1
2
3
4
5
6
7
8
Digital Video Recorder
4

5
Connect the supplied Ethernet cable (1) to the Ethernet port on your DVR then connect the other end to a spare port on
your router (2). Don’t proceed to the next step until this is done.
Step Two - Connect to your Home Network
1
VIDEO IN VGA AUDIO LAN & USB 12V
ININININ
OUT
1
2
3
4
5
6
7
8
USB Inte rnet 432
Please note - It’s important that you do this as this allows your DVR to send email alerts, synchronise its
internal clock and for remote access using the SwannView Link app.
2

6
Connect the supplied mouse (1) to the bottom USB port. To copy your video recordings and to perform a firmware
upgrade, connect a USB storage device (2) such as a flash drive (not included) to the top port.
Step Three - Connect your Mouse
1
VIDEO IN VGA AUDIO LAN & USB 12V
ININININ
OUT
1
2
3
4
5
6
7
8
Please note - Bluetooth and wireless mice and trackpad devices are not supported. Not all USB storage devices
are supported.
2

7
Connect the supplied HDMI cable to the HDMI output on your DVR then connect the other end to a spare HDMI input
(1) on your TV. Press the A/V button on your TV’s remote to select the HDMI input (in this case it would be HDMI 1).
Step Four - Connect to your TV
HDMI IN 2
HDMI IN 1
1
VIDEO IN VGA AUDIO LAN & USB 12V
ININININ
OUT
1
2
3
4
5
6
7
8
Press the A/V button
on your TV’s remote to
select the HDMI input.

8
If you have a monitor with a VGA connection, connect a VGA cable (not supplied) to the VGA port on the DVR then
connect the other end to the VGA input (1) on your monitor.
Step Five - Connect to your Monitor
A VGA cable and monitor
are not required when
using the HDMI cable.
1
VIDEO IN VGA AUDIO LAN & USB 12V
ININININ
OUT
1
2
3
4
5
6
7
8

9
Connect the supplied power adapter’s power connection (1) to the power input on your DVR first (this will minimise
sparking) then connect the power adapter to a power outlet (2). Press the outlet’s switch to supply power.
Step Six - Connect your Power Adapter
1
VIDEO IN VGA AUDIO LAN & USB 12V
ININININ
OUT
1
2
3
4
5
6
7
8
2
All connections have now been completed. You should see the DVR on your TV with the Setup Wizard displayed on-
screen. Follow “The Setup Wizard” Quick Start Guide (the red coloured guide) to configure your DVR.