Swarovski Optik EL 10x42 User manual

12
DE
13
DE
We are very pleased that you decided to
purchase this product from SWAROVSKI OPTIK.
If you have any questions, please consult your
specialist dealer or contact us directly at
WWW.SWAROVSKIOPTIK.COM.
Please find our current product accessories at WWW.SWAROVSKIOPTIK.COM.
SW
AROVSKI
8
5
1
2
3
4
6
7
1 Carry strap
2 Rain cap
3 Screw-in-type eye cups
4 Focusing wheel
5 Dioptric scale
6 Dioptric zero point
7 Objective cap
8 Snap Shot Adapter
Functional bag
(see page 14-15)
For your safety!
WARNING!
Never look at the sun with
the binocular! This leads to
injury of your eyes!
Never look through the
binocular when walking!
You could encounter ob-
stacles!
General information
Please protect your bino-
culars from jolts and jars.
Repairs should be carried
out only by authorized
workshops.
EN EN

14
DE
15
DE
Attaching the lift carrying strap
Attachment without pouch or use with pouch
detached.
Attachment with pouch hooked in on one side.
8
3
1
1
2
66
7
8
7
3
2
4
5
4
5
EN EN
3
3
11
22
4 4
55
8
6 6
7
8
7

16
DE
17
DE
Adjustment of interpupillary distance
To see a single round image, turn the two halves
of the binoculars until no irritating shadows can
be seen.
Adjustment of focusing
It is possible to bring every
subject into focus from
the shortest adjustment
distance (see Technical
Data Sheet) to infinity by
turning the focusing wheel.
In the infinity position the little nose of the focusing
wheel is at the top.
Dioptric compensation
To achieve optimal image quality, the possibly
varying visual acuity between the left and right eye
must be corrected.
Adjustment of the screw-in-type eye cups
Use without eyeglasses:
Basically, there are two different adjustment posi-
tions available with different distances between the
eye and the lens. This allows you to adjust the eye
cups individually to your personal preference.
Pos. A: Turn both eye cups
(counter-clockwise) until
they stop – position A.
Pos. B: Position B is reached
by turning both eye cups
clockwise.
Use with eyeglasses:
Pos. C: Turn both eye cups
clockwise until they stop.
Operation
EN EN

18
DE
19
DE
2.
1. 3.
- 4 3 2 1 0 1 2 3 4
Use with equal acuity of both eyes:
1. Pull the focusing wheel outwards.
2. By turning the focusing wheel, set the dioptric
scale to “0”.
3. Push the focusing wheel back in.
Use with varying acuity of both eyes:
1. Look through the left ocular with your left eye
and turn the focusing wheel to focus sharply on
a selected object.
2. Pull the focusing wheel outwards.
3. Now look at the same object through the right
ocular with your right eye and again adjust the
focusing wheel to attain optimal clarity.
4. Press the focusing wheel back in again.
Please note your personal dioptric value on the
dioptric scale.
Use of the Snap Shot Adapter
Refer to dedicated Operating Instructions or
WWW.SWAROVSKIOPTIK.COM.
Assembly instructions for objective lens cover
1.
3.
4.
2.
- 4 3 2 1 0 1 2 34
2. 1.
EN EN

20
DE
21
DE
Lens-cleaning cloth
You can clean high sensitive lens surfaces with
the enclosed special cloth made of micro-fibres. It
is suitable for objective lens, ocular lens and eye-
glasses.
Please keep the cloth clean, as dirt can damage
the lens surface. If the cloth gets dirty, it can be
washed in luke-warm soapy water and air-dried.
Please use it exclusively for cleaning lens sur-
faces!
Cleaning
We have designed all elements and surfaces
to require little care. To ensure the long-lasting
optical brilliance of your binocular, you should
keep the glass surfaces free of dirt, oil and grease.
When cleaning the lenses, first remove larger par-
ticles with an optical lens brush. For the subse-
quent thorough cleaning we recommend breathing
onto the lens surface to form a coat of condensa-
tion and then cleaning it with a soft, moist cloth.
The housing is best cleansed with a soft, moist
cloth (don’t use the lens-cleaning cloth).
Maintenance and care In the event of hard-to-remove dirt (e.g. sand)
the eye cups can be unscrewed and cleaned very
easily.
Storage
You should keep your binocular in its bag in a well-
ventilated, dry place.
If the instrument is wet,
it must be dried prior to
storage.
In tropical regions or re-
gions with a high degree of
humidity the best place to
store the instrument in is an air-tight receptacle
along with a moisture-absorbing agent (e.g. silica
gel).
SIG
L
IA
C
E
L
All data are typical values.
We reserve the right to make changes regarding design and delivery.
We accept no liability for printing errors. BA-678-01, 05/2008
EN EN