Swiss Madison St. Tropez SM-1T253 User manual

INSTALLATION
INSTRUCTIONS
St. Tropez One-Piece Toilet
SM-1T253 / SM-1T254 / SM-1T254MB
www.swissmadison.com | 1-434-623-4766 | [email protected]
Swiss Madison
®
Share your pictures for a feature!
using
#SwissMadison

Thank you for purchasing a Swiss Madison One-Piece Toilet.
We appreciate your business and know you will enjoy your toilet for many years to come.
If you have any questions or require assistance we would be happy to help,
please contact us at 1-434-6234766 or [email protected].
Thank you for your purchase!
www.swissmadison.com
To learn more about our products, please visit:
Sincerely,
The Swiss Madison Team
If you have any questions or concerns please contact us:
1-434-623-4766
[email protected]
General Recommendations: Read installation and maintenance instructions thoroughly before installing the toilet.
Be sure to use proper tools and always wear proper personal safety accessories for your protection.
—1 —
Prior to Installation:
· Inspect toilet to ensure no damages have occurred while in shipping.
· Observe all plumbing and building codes in accordance with your state and
local requirements.
· Remove old toilet.
· Make sure mounting surface is CLEAN and LEVEL.
· All dimensions are nominal! Be sure to measure your toilet prior to installation.

—2 —
ONE-PIECE TOILET MODELS
St. Tropez
27 ³⁄16” x 15 9⁄16“ x 31 5⁄16”
SM-1T254 - White
15 9⁄16”
5 ¹¹⁄16”
18 ¹⁄2”
27 ³⁄16”
16”
31 5⁄16”
12”
Rough-in
St. Tropez
26 ¹⁄2” x 15“ x 31” SM-1T254MB - Matte Black
15”
6”
18 ³⁄4”
26 ¹⁄2”
16 ¹⁄2”
31”
12”
Rough-in
St. Tropez
27 ³⁄16” x 15 9⁄16“ x 31 5⁄16”
SM-1T253 - White
15 9⁄16”
5 ¹¹⁄16”
18 ¹⁄2”
27 ³⁄16”
16”
31 5⁄16”
12”
Rough-in

ONE-PIECE TOILET ROUGH DIMENSIONS
—3 —
NOTE: Specialized tools may be necessary to install a Swiss Madison One-Piece Toilet, plumbing not included.
SUGGESTED TOOLS AND MATERIALS
Safety Glasses Wrench Level
Screwdriver
NOTE: Distance from wall to closest flange centerline must be listed as below.
Putty Knife Tape Measure
Hacksaw
Flexible Supply Tube
PARTS LIST
W”
L”
H”
12”
Rough-in
· One-Piece Toilet · Wax Ring/ Gasket · Bolts · Side Cover Caps

—4 —
The step-by-step guidelines in the installation instructions are a general reference.
Should there be any discrepancies, Swiss Madison cannot be held liable.
It is recommended to install all Swiss Madison products by hiring a licensed professional
2. Rough-In the Toilet
· Using the measurements on the previous page, find the toilet’s rough-in.
· Measure the wall from behind the toilet to the middle of the closet bolt.
NOTE: Your rough-in measurement should be around 12”.
Rough-in
1. Remove Old Toilet
· Close toilet supply valve and flush tank completely, use towel or sponge to remove excess water.
· Disconnect and remove supply line, if you are replacing the valve shut off the main water supply first.
· Remove old mounting hardware, remove toilet and plug floor waste opening to prevent escaping gas.
· Remove closet bolts from flange and clean away old wax and putty from base area.
ONE-PIECE TOILET INSTALLATION INSTRUCTIONS
1. Read the complete instruction manual before beginning installation.
2. Confirm that your model will fit in intended location and plumbing fixtures are located
where legally required before beginning installation.
3. Not all drawings on this manual are drawn to scale. Please refer to the model chart.
4. Two people are recommended to install and move this product.
5. Product is FRAGILE! To avoid breakage and possible injury handle with care.
NOTE: Drawings may not exactly define contour of china.