Swiss Madison SM-UT802 User manual

®
Swiss Madison
®
INSTALLATION
INSTRUCTIONS
Voltaire Waterless Urinal
SM-UT802
www.swissmadison.com | 1-434-623-4766 | [email protected]
Share your pictures for a feature
using #SwissMadison

Thank you for purchasing a Swiss Madison Urinal.
We appreciate your business and know you will enjoy your product for many years to come.
If you have any questions or require assistance we would be happy to help,
please contact us at 1-434-6234766 or [email protected].
Thank you for your purchase!
www.swissmadison.com
To learn more about our products, please visit:
Sincerely,
The Swiss Madison Team
—1 —
Prior to Installation:
If you have any questions or concerns please contact us:
1-434-623-4766
[email protected]
General Recommendations: Read installation and maintenance instructions thoroughly before installing.
Be sure to use proper tools and always wear proper personal safety accessories for your protection.
· Inspect urinal to ensure no damages have occurred while in shipping.
· Observe all plumbing and building codes in accordance with your state and local requirements.
· Make sure mounting surface is CLEAN and LEVEL.
· All dimensions are nominal! Be sure to measure your urinal prior to installation.

WATERLESS URINAL ROUGH DIMENSIONS
—2 —
· Waterless Urinal · Fixing Kit · PVC Connecting Tubes · Maintenance Key
PARTS LIST
NOTE: Specialized tools may be necessary to install a Swiss Madison Urinal, plumbing not included.
NOTE: All measurements are nominal.
SUGGESTED TOOLS AND MATERIALS
Voltaire SM-UT802 - White
14” x 12 ³⁄16” x 24 ¹³⁄16”
14”
24 ¹³⁄16”
12 ³⁄16”
12 ³⁄8”
Safety
Glasses Wrench Screwdriver Pencil Drill (Ø 5/16 bit)

WATERLESS URINAL INSTALLATION INSTRUCTIONS
—3 —
NOTE: Drawings may not exactly define contour of china.
The step-by-step guidelines in the installation instructions are a general reference for installing a Swiss Madison Urinal.
Should there be any discrepancies, Swiss Madison cannot be held liable.
It is recommended to install all Swiss Madison products by hiring a licensed professional
1. Read the complete instruction manual before beginning installation.
2. Confirm that your model will fit in intended location and plumbing fixtures are located
where legally required before beginning installation.
3. Not all drawings in this manual are drawn to scale. Please refer to the model chart.
4. Two people are recommended to install and move this product.
5. Product is FRAGILE! To avoid breakage and possible injury handle with care.
WARNING: Do not install on copper DWV as copper is highly corrosive.
1. Mark Anchor Position
· Mark the center and place the anchor at the recommended distance.
NOTE: it is recommended to use PVC drain pipe.
A = 20 ¹⁄4”
Ø 2” drain
pipe
B = 13 9⁄16”

WATERLESS URINAL INSTALLATION INSTRUCTIONS
—4 —
NOTE: Drawings may not exactly define contour of china.
2. Drill According to Wall Material
· Drill the mark with Ø 5/16” drill bit for concrete (not included).
· For installations with wood framing, sheet rock and tile, you will need to put proper
backing behind wall before installation the product.
NOTE: 3/4” plywood is a suitable backing for this installation. Preferably a minimum of
a foot wide with the bracket centered in the middle of the 3/4” plywood. Make sure to
securely fasten backing.
3. Attach Bracket
· Insert the anchor into the marked hole.
· Attach the wall bracket using the washer and lag screw
anchor
wall bracket
lag screw

WATERLESS URINAL INSTALLATION INSTRUCTIONS
—5 —
NOTE: Drawings may not exactly define contour of china.
4. Install Connecting Tubes
· Insert the trap connector or adapter into the drain pipe, make sure the drain pipe is rigid
and fixed to the wall.
· Insert the tube into the drain, cut tube if necessary.
NOTE: If the drain pipe is a different diameter it is recommended to buy a sanitary coupling
or adapter as needed.
5. Check Mount Position
· Mount urinal on wall bracket.
· Screw the nut into the cartridge. Verify the tilt of the pipe elbow is adequate to avoid
stagnation and bad odors.
NOTE: If the bracket needs to be adjusted, remove urinal, loosen lag screw and adjust
bracket up/down as needed.
Ø 2” drain
pipe
nut
cartridge
trap connector
or adapter for
Ø 2” drain pipe

WATERLESS URINAL INSTALLATION INSTRUCTIONS
NOTE: Drawings may not exactly define contour of china.
—6 —
6. Secure Mount
· Remove urinal and bracket from the wall.
· Mark the missing holes in the bracket with a pencil.
· Drill remaining marks with Ø 5/16” drill bit for concrete (not included).
· Insert anchors into the marked holes.
· Attach the wall bracket using the washers and lag screws.
anchor
wall bracket
lag screw

WATERLESS URINAL INSTALLATION INSTRUCTIONS
NOTE: Drawings may not exactly define contour of china.
—7 —
7. Secure Urinal
· Mount urinal on bracket and reattach to cartridge and piping.
· Verify the tilt of the pipe elbow is adequate to avoid stagnation and bad odors.
nut
cartridge

WATERLESS URINAL CLEANING & MAINTENANCE
NOTE: Drawings may not exactly define contour of china.
—8 —
8. Daily Cleaning
· Perform daily cleaning with cleaning product of your choice.
· It is very important to pour at least one gallon of clean or recycled water everyday.
NOTE: Use soft fibers to avoid scratching the ceramic.
9. Monthly Maintenance
· Unscrew and remove cartridge with maintenance key.
· It is very important to pour at least one gallon of clean or recycled water everyday.
· Unscrew and disassemble cartridge system, clean all components with soap and water
then reassemble.
NOTE: Use soft fibers to avoid scratching the ceramic and spheres.
10. Troubleshooting
cartridge top
large sphere
sphere holder
gasket
gasket
lower chamber
small sphere
funnel
deposit
CAUSE SOLUTIONPROBLEM
Bad Smell
· The cartridge sphere is not sealing.
· Connector is disassembled or incorrectly installed.
· The sphere is not inside the cartridge.
· Remove cartridge and wash its components.
· Insert the connector and check installation.
· Place sphere into cartridge.
· Accumulation of sediment in product/pipeline. · Remove product, wash components, and pour clog
remover/ perform mechanical maintenance on the pipe.
· Pipe elbow tilt is not adequate for drainage. · Uninstall and reinstall the product.
Stagnant
Liquids

1-434-MADISON
(623-4766)
19 Stults Road
Dayton, NJ 08810
www.swissmadison.com
ONE YEAR LIMITED WARRANTY
Swiss Madison® products are made with quality materials and excellent craftsmanship to provide our
customers with beautiful, durable, long-lasting products. Should there be any defects in materials or
craftsmanship under regular use that are discovered within the first year of installation, Swiss Madison®
will provide replacement parts at no charge, or at its discretion, replace any product or part of the product
that is deemed defective, under normal installation, use, service or maintenance. This warranty applies
only to the original purchaser. Proof of purchase will be required in the instance of a claim.
Swiss Madison®recommends all installations of Swiss Madison® products to be conducted by a
licensed, professional plumber or contractor. Swiss Madison®will not be held responsible for any
damage or product failure due to improper installation, misuse, or failure to utilize a licensed professional
for installation. Swiss Madison® is not responsible for any installation or removal costs.
This One Year Limited Warranty Will Be Voided If:
• The installation recommendations were not followed by the installer
• The product has been moved from its initial place of installation
• The product has in any way been modified from its packaged state
• The product has been subjected to improper maintenance, abuse, misuse, excessive use of
chemicals, accidents, or other damages, etc.
Swiss Madison®makes no implication that its products comply with any local building or plumbing
codes. It is the consumer’s responsibility and obligation to determine local code compliance prior to and
during installation. This warranty extends only to the original purchaser and first consumer.
Swiss Madison®is not responsible for any special, incidental or consequential damages associated with
the installation, replacement, return or use of the original purchaser’s product. This includes, but is not
limited to: freight costs, labor, travel time, lost profit, home damages and other contingent liabilities and
costs (including, without limitation, costs associated with ‘professionals’ or ‘experts’, investigations,
audits, analyses, attorneys and any other professional/hired services).
The Swiss Madison®warranty is a comprehensive and explicit limit of liability. All items not disclosed
within the warranty are not addressable within the responsibility of Swiss Madison®. Certain states have
variances regarding implied warranties; in those situations, we remain fully compliant.
If you have any questions or concerns, please contact us directly at
1-434-MADISON (623-4766)
WARNING: Contents of your order may contain sharp and possibly other harmful pieces and may
cause hazard to children and adults. Swiss Madison®is not responsible in any way for personal dam-
ages.
Swiss Madison
®