Swisscom Aton CL103 User manual

1
Gigaset E360 / SWZ-PTT en / English for Internet / cover.fm / 30.08.2006
Aton CL103
User guide

2
Gigaset E360 / SWZ-PTT en / English for Internet / cover.fm / 30.08.2006

1
The handset at a glance
Gigaset E360 / SWZ-PTT en / English for Internet / overview.fm / 30.08.2006
Version 4, 16.09.2005
The handset at a glance
Base station at a glance
1 Registration/paging key
1 Direct dialling keys (I to III)
2Display in idle status (example)
3Battery charge level
eVU
(1/3 charged to fully charged)
= flashes: battery almost flat
eVUflashes: battery charging
4Display keys (page 12)
5Control key (page 12)
6End call key, On/off key
End call, cancel function, go back one menu
level (press briefly), back to idle status (press
and hold), activate/deactivate handset
(press and hold in idle status)
7Hash key
Keypad lock on/off (press and hold in
idle status, page 12)
Insert a pause (press and hold for dialling)
Switch between uppercase/lowercase let-
ters and digits for text entry (page 32)
8Microphone
9Recall key
Enter flash (press and hold)
10 Connection socket for headset
11 Talk key
Answer a call, start dialling
12 Handsfree key
Toggle between earpiece and
handsfree mode
Lights up: handsfree activated
– Flashes: incoming call
13 Voice portal key
11
3
4
6
1
9
2
7
8
10
5
12
U
09:19
§§Menu §
1
3
1

2
Contents
Gigaset E360 / SWZ-PTT en / English for Internet / E360IVZ.fm / 30.08.2006
Version 4, 16.09.2005
Contents
The handset at a glance . . . . . . . 1
Base station at a glance . . . . . . . . 1
Safety precautions . . . . . . . . . . . . 4
Special features of the
Aton CL103 . . . . . . . . . . . . . . . . . . . 5
Aton CL103 –
more than just a telephone . . . . . 5
First steps . . . . . . . . . . . . . . . . . . . . 5
Pack contents . . . . . . . . . . . . . . . . . . . . 5
Installing the base station . . . . . . . . . . 5
Connecting the base station . . . . . . . . 6
Setting up the handset for use . . . . . . . 6
Menu tree . . . . . . . . . . . . . . . . . . . 9
Making calls . . . . . . . . . . . . . . . . . 11
Making an external call/
ending a call . . . . . . . . . . . . . . . . . . . . 11
Answering a call . . . . . . . . . . . . . . . . . 11
Calling line identification . . . . . . . . . . 11
Handsfree operation . . . . . . . . . . . . . 11
Operating the handset . . . . . . . . 11
Switching the handset on/off . . . . . . . 11
Activating/deactivating
the keypad lock . . . . . . . . . . . . . . . . . 12
Control key on the handset . . . . . . . . 12
Display keys . . . . . . . . . . . . . . . . . . . . 12
Returning to idle status . . . . . . . . . . . 12
Menu guidance . . . . . . . . . . . . . . . . . 13
"Swisscom Voice Portal" key . . . . . . . . 13
Correcting incorrect entries . . . . . . . . 13
Using the directory, direct
dialling keys and lists . . . . . . . . . 14
Directory . . . . . . . . . . . . . . . . . . . . . . . 14
Direct dialling keys . . . . . . . . . . . . . . . 15
Last number redial list . . . . . . . . . . . . 15
Opening the message list with
the display key . . . . . . . . . . . . . . . . . . 16
SMS (text messages) . . . . . . . . . 18
Registering with the
registration wizard . . . . . . . . . . . . . . . 18
Writing/sending an SMS . . . . . . . . . . . 19
Receiving an SMS . . . . . . . . . . . . . . . . 20
Setting up the SMS centre . . . . . . . . . 21
SMS to a PABX . . . . . . . . . . . . . . . . . . . 21
Activating/deactivating the
SMS function . . . . . . . . . . . . . . . . . . . . 21
SMS troubleshooting . . . . . . . . . . . . . 22
Using the network mailbox (Com-
box) . . . . . . . . . . . . . . . . . . . . . . . 23
Using the network mailbox for
setting speed dialling . . . . . . . . . . . . . 23
Viewing the network mailbox
message . . . . . . . . . . . . . . . . . . . . . . . 23
Using several handsets . . . . . . . 23
Registering handsets . . . . . . . . . . . . . . 23
Locating a handset ("Paging") . . . . . . . 24
Making internal calls . . . . . . . . . . . . . . 24
Listening in to an external call . . . . . . 25
Handset settings . . . . . . . . . . . . 25
Changing the display language . . . . . 25
Screensaver . . . . . . . . . . . . . . . . . . . . . 25
Auto answer . . . . . . . . . . . . . . . . . . . . 25
Adjusting the loudspeaker volume . . . 25
Changing ringtones . . . . . . . . . . . . . . 26
Activating/deactivation
suppression of the first ringtone . . . . 26
Advisory tones . . . . . . . . . . . . . . . . . . 26
Using the handset as an
alarm clock . . . . . . . . . . . . . . . . . . . . . 27
Restoring the handset default
settings . . . . . . . . . . . . . . . . . . . . . . . . 27
Base station settings . . . . . . . . . 27
Changing the system PIN . . . . . . . . . . 27
Restoring the base station to
factory settings . . . . . . . . . . . . . . . . . . 28
Operating the base station
on the PABX . . . . . . . . . . . . . . . . 28

3
Contents
Gigaset E360 / SWZ-PTT en / English for Internet / E360IVZ.fm / 30.08.2006
Version 4, 16.09.2005
Appendix . . . . . . . . . . . . . . . . . . . 29
Symbols and typographical
conventions used . . . . . . . . . . . . . . . . 29
Care . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Contact with liquid . . . . . . . . . . . . . . . 29
Faults and Self-help with
Troubleshooting . . . . . . . . . . . . . . . . . 29
Warranty/Maintenance/Repair/
Authorisation . . . . . . . . . . . . . . . . . . . 30
Repair/Maintenance . . . . . . . . . . . . . . 30
Technical data . . . . . . . . . . . . . . . . . . . 31
Writing and editing a text message . . 32
Accessories . . . . . . . . . . . . . . . . . 33
Wall mounting for base station . 34
Index . . . . . . . . . . . . . . . . . . . . . . . 35

4
Safety precautions
Gigaset E360 / SWZ-PTT en / English for Internet / security.fm / 30.08.2006
Version 4, 16.09.2005
Safety precautions
Caution:
Read the safety precautions and the user guide before use.
Explain their contents to your children as well as the potential hazards associated with using the tel-
ephone.
Only use the mains adapter supplied, as indicated on the underside of the base
station.
Only fit the recommended rechargeable batteries of the same type
(page 31)! In other words, do not use any other battery type or non-rechargea-
ble batteries as this could result in significant health risks and personal injury.
Fit rechargeable batteries with the correct polarity and use them according to
this user guide (polarity symbols can be seen in the handset's battery compart-
ment, page 6).
The operation of medical appliances may be affected. Be aware of the technical
conditions in your particular environment, for example doctor's surgery.
Do not hold the reverse side of the handset to your ear if the handset is ringing
or if the handsfree function is switched on. Otherwise, you risk developing seri-
ous, permanent hearing damage.
The handset may cause an unpleasant humming noise in hearing aids.
Do not install the base station in bathrooms or shower rooms. The handset and
base station are not splash proof (page 29).
Do not use the phone in environments with a potential explosion hazard, for
example auto paint shops.
If you give your Aton CL103 to someone else, make sure you also give them the
user guide.
Information about disposal
At the end of its service life this product must not be disposed of among the
normal household refuse. Instead, it must be handed in at a sales outlet or at a
collection point for recycling electrical and electronic devices in accordance with
regulations governing the return, taking back and disposal of electrical and elec-
tronic devices (ORDEA).
The materials can be recycled as indicated. By recycling materials and reusing or
utilising old appliances in any other way you are making an important contribu-
tion to the protection of the environment.
Note:
– Not all of the functions described in this user guide are available in all countries. CLIP (Calling Line
Identification Presentation), SMS (Short Message Services) and "Swisscom Voice Portal": these
functions depend on the network provider.
$
‹
Œ
ƒ

5
Special features of the Aton CL103
Gigaset E360 / SWZ-PTT en / English for Internet / starting.fm / 30.08.2006
Version 4, 16.09.2005
Special features of the
Aton CL103
uLarge keys
uText and symbols are shown clearly in
large type on the display
uJumbo Font
uDirect dialling keys
uCompatibility with hearing aids
(HAC – Hearing Aid Compatibility)
uConnection for headset (headset
included in scope of delivery)
uVoice portal key
uECO mode (low radiation mode)
uSwitch-mode mains adapter (energy
saving)
Aton CL103 –
more than just a telephone
Your phone not only enables you to send
and receive text messages over the fixed
network and store up to 100 telephone
numbers (page 14) – it can do a whole lot
more:
uYou can programme the direct dialling
keys of your phone with important
phone numbers. The number is then
dialled by simply pressing a key
(page 15).
uUse the handsfree function (page 11)
to keep your hands free when making
acall.
uUse your handset as an alarm clock
(page 27).
Have fun using your new telephone!
First steps
Pack contents
The packaging contains a Aton CL103
base station, a handset, a mains adapter, a
telephone cable, two batteries, a battery
cover, a belt clip, a user guide and a head-
set.
Installing the base station
The base is designed to be operated in
enclosed, dry areas at temperatures rang-
ing from +5 °C to +45 °C.
Set up the base station at a central point in
the apartment or house.
Please refer to the end of the user guide
for information on wall-mounting the
base station.
Please remember:
uNever expose the telephone to heat
sources, direct sunlight, other electrical
appliances.
uProtect your Aton CL103 from mois-
ture, dust, corrosive liquids and
vapours.
Note:
ECO mode (low radiation mode)
Your telephone is fitted with radiation redu-
cing ECO mode. This means that once the
handset is placed in the base station, the trans-
mitting power between the handset and base
station is reduced to a minimum.
ECO mode is only active if a handset is regis-
tered on the base station.
ECO mode may be impaired in some cases by
other wireless DECT products, which are within
its range.

6
First steps
Gigaset E360 / SWZ-PTT en / English for Internet / starting.fm / 30.08.2006
Version 4, 16.09.2005
Connecting the base station
¤First connect the mains adapter and
then the phone jack as shown below
and place the phone cord in the cord
recess.
1 Underside of the base (section)
2 Mains adapter 230 V
3 Phone jack with phone cord
Please remember:
uKeep the mains adapter plugged in at
all times for operation as the phone
does not work without mains
connection.
uIf you buy a replacement phone cord
from a store ensure that the phone jack
is connected correctly.
Setting up the handset for use
Fitting the batteries and closing the
cover
¤Fit the batteries with the correct polar-
ity (see diagram).
The polarity is indicated in the battery
compartment.
¤First align the notches on the side of
the battery cover with the protrusions
of the inside of the casing.
¤Then press down the cover so that it
clicks into place.
Correct phone jack assignment
1unused
2unused
3a
4b
5unused
6unused
1
3
2
1
1
1
3
2
1
4
5
6
Caution:
Use only the rechargeable batteries recom-
mended on page 31. In other words, never use
a conventional (non-rechargeable) battery or
other battery types as this could result in sig-
nificant health risks and personal injury. For
example, the outer casing of the batteries or
accumulators could be destroyed or the batter-
ies could explode. The phone could also mal-
function or be damaged as a result of using
batteries that are not of the recommended
type.

7
First steps
Gigaset E360 / SWZ-PTT en / English for Internet / starting.fm / 30.08.2006
Version 4, 16.09.2005
Attaching the belt clip
There are notches for attaching the belt
clip on the side of the handset at the same
height as the display.
¤Press the belt clip onto the back of the
handset so that the protrusions on the
belt clip engage with the notches.
You can also attach a cord for carrying the
handset in your hand or wearing it around
your neck.
Opening the battery cover
¤If fitted, remove the belt clip.
¤Reach into the housing cavity and pull
the battery cover upwards.
Placing the handset in the base station
and registering
Requirement: the handset must not
already be registered on any base station.
Registering the handset on the
Aton CL103 base station occurs
automatically.
¤Place the handset in the charging cra-
dle of the base station with its display
facing forward.
You will hear a confirmation tone.
Automatic registration can take up to
5 minutes. While registration is in
progress the screen displays Registering .
The handset is assigned the lowest unas-
signed internal number (1–4). If several
handsets are registered on the base, the
internal number is shown in the display
after registration, for example 2. This
means that the handset has been assigned
the internal number 2.
¤To charge the batteries, leave the hand-
set in the charging cradle on the
base station.
For questions and problems see page 29.
Notes:
– Automatic registration is only possible if
the base station on which you wish to reg-
ister the handset is not being used to make
a call.
– A key press cancels automatic registration.
– If four handsets are already registered on
the base station there are two options:
– The handset with the internal number 4
is in idle status: the handset you wish to
register is assigned the number 4. The
handset that was previously number 4 is
de-registered.
– The handset with the internal number 4
is being used: the handset you wish to
register cannot be registered.
– If automatic registration does not work the
handset will have to be registered manually
(page 23).
Notes:
– The handset may only be placed in the
base/charging cradle provided for it.
– If the handset has switched itself off
because the batteries are flat and is then
placed in the base/cradle, it will switch
itself on automatically.

8
First steps
Gigaset E360 / SWZ-PTT en / English for Internet / starting.fm / 30.08.2006
Version 4, 16.09.2005
Initial charging and discharging of
batteries
Battery charging is indicated in the top
right of the display by a flashing battery
icon e, Vor U. During handset
operation, the battery icon indicates the
charge status of the batteries (page 1).
The correct charge status can only be dis-
played when the batteries are first fully
charged and discharged through use.
¤To do this, leave the handset in the
base without interruption until the bat-
tery icon stops flashing in the display
(approx. 13h).
¤Once the batteries are fully charged,
remove the handset from the base and
do not put it back again until the batter-
ies are fully discharged.
Please remember:
uAlways repeat the charging and dis-
charging procedure if you remove the
batteries from the handset and re-
insert them.
uThe batteries may warm up as they are
charging. This is not dangerous.
uAfter a time the charge capacity of the
batteries will decrease for technical rea-
sons.
Setting the date and time
§Menu§ ¢Settings ¢§OK§ ¢Date/Time
¢§OK§
~Enter the day, month and year
with 6 digits and press §OK§.
Use qto move between the
fields.
~Enter hours and minutes with
4 digits (e.g. 0 7 1 5 for
07.15 hrs) and press §OK§.
Use qto move between the
fields.
Once the phone is registered and the
time set, the idle display looks as shown
on page 1.
Your phone is now ready for use.
Note:
After the first battery charge and discharge
you may replace your handset in its base after
every call.
Note:
You will find explanations for the symbols and
typographical conventions used in this user
guide in the appendix, page 29.

9
Menu tree
Gigaset E360 / SWZ-PTT en / English for Internet / menuetree.fm / 30.08.2006
Version 4, 16.09.2005
Menu tree
There are two ways to select a function:
Using number combinations ("shortcut")
¤To open the main menu, press §Menu§ with the handset in idle status.
¤Enter the number combination that is in front of the function in the menu tree.
¤Example: §Menu§ LIfor "Set handset language".
Scrolling through the menus (see also page 29)
¤To open the main menu, press §Menu§ with the handset in idle status.
¤Scroll to the required function with the control key and press §OK§.
1Directory
2Calls
3SMS
3-1 Write Message
3-2 Incoming 00+00
3-3 Outgoing
3-4 Settings 3-4-1 Service Centres 3-4-1-1 Service Centre 1
… [to]
3-4-1-3 Service Centre 3
3-4-2 Subscribe SMS
4Alarm
4-1 Activation
4-2 Wakeup time
5 Audio Settings
5-1 Handset Volume
5-2 Handsfree Volume
5-3 Ringer Volume
5-4 Ringer Melody 5-4-1 External Calls
5-4-2 Internal Calls
5-4-3 Alarm Clock
5-5 Advisory Tones
5-6 Battery Low 5-6-1 Off
5-6-2 On
5-6-3 During Call
5-7 Headset Volume

10
Menu tree
Gigaset E360 / SWZ-PTT en / English for Internet / menuetree.fm / 30.08.2006
Version 4, 16.09.2005
6Settings
6-1 Date/Time
6-2 Direct Diall. Keys
6-3 Language
6-4 Jumbo Font
6-7 Handset 6-7-1 Screen Saver
6-7-2 Auto Answer
6-7-3 Register Handset
6-7-4 Reset Handset
6-8 Base 6-8-2 System PIN
6-8-3 Base Reset
6-8-4 Listening in
7 Voice Mail
7-1 Set Key 1 7-1-1 Network Mailbox

11
Making calls
Gigaset E360 / SWZ-PTT en / English for Internet / telephony.fm / 30.08.2006
Version 4, 16.09.2005
Making calls
Making an external call/
ending a call
External calls are calls using the public tel-
ephone network.
~ (Enter phone number) ¢c.
The number is dialled. (You can also first
press the ckey [ringtone] and then enter
the number.) The earpiece volume can be
adjusted during the call with the tkey.
End a call/cancel dialling:
Press the end call key a.
Answering a call
The handset indicates an incoming call in
three ways: by ringing, by a display on the
screen and by the flashing handsfree
key d.
You can answer the call by:
¤Pressing the talk key c.
¤Pressing the handsfree key d.
¤Press the display key §Accept§.
If the handset is in the base and the Auto
Answer function is activated (page 25), the
handset will answer a call automatically
when you lift it out of the base.
If the ringtone is intrusive, press §Silence§.
The ringtone is switched off for this call.
You can answer the call so long as it is dis-
played on the screen.
Calling line identification
When you receive a call, the caller's
number is displayed on the screen if the
following conditions are met:
uYour network provider supports CLIP,
CLI:
– CLI (calling line identification): the
caller's number is transmitted
– CLIP (calling line identification pres-
entation): the caller's number is dis-
played
Displaying the caller's number
The phone number of the caller is shown
on the display or also the name of the
caller if the name has been stored in the
directory.
Requirements:
see Calling line identification.
Extern. Call appears on the display if calling
line identification presentation is not wor-
king, while Withheld is displayed if calling
line identification has been suppressed by
the caller.
Handsfree operation
You can make calls immediately in hands-
free mode (the dkey lights up perma-
nently) after entering the phone number
by pressing the handsfree key d. Tog-
gle between earpiece and handsfree
mode during a call by pressing the d
key. The volume can be adjusted during
handsfree operation with the tkey.
Operating the handset
Switching the handset on/off
aPress and hold the end
call key.
You will hear the confirmation tone.

12
Operating the handset
Gigaset E360 / SWZ-PTT en / English for Internet / telephony.fm / 30.08.2006
Version 4, 16.09.2005
Activating/deactivating
the keypad lock
#Press and hold the hash key.
You will hear the confirmation tone. The
icon Øappears in the display when the
keypad lock is activated.
Control key on the handset
1 Control key
The side of the control key you have to
press in the given operating situation is
shown in black (top, bottom) in this user
guide. Example: tfor "press the top of
the control key".
The control key has a number of different
functions:
When the handset is in idle status
sOpen the directory.
tAdjust the ringer melody vol-
ume of the handset (page 26).
In lists and menus
t/ sScroll up/down line by line.
In an input field
t/ sMove the cursor left or right.
During an external call
sOpen the directory.
tAdjust loudspeaker volume for
earpiece and handsfree mode.
Display keys
The current display functions are shown in
the bottom display line in reverse video.
The functions of the display keys change
depending on the particular operating
situation.
Example:
1 Current display key functions
2 Display keys
The most important display symbols are:
§Back§ Go back one menu level or
cancel operation.
§Menu§ Open the main menu or a con-
text-dependent menu.
§OK§ Confirm highlighted selection.
§Delete§ Delete key: backspace delete
one character at a time.
§Redial§ Open the last number redial
list.
Returning to idle status
You want to return to idle status from any-
where in the menu: Press the end call
key aand hold.
If you do not press any key, the display will
automatically revert to idle status after
2minutes.
Changes that you have not confirmed/
stored by pressing §OK§ will be rejected.
For an example of the display in idle sta-
tus: page 1.
Note:
The handset displays an advisory message if
you press a key by accident while the keypad
lock is on. To deactivate the keypad lock, press
the hash key #and hold.
1
2
1
§Redial§ §§Menu §

13
Operating the handset
Gigaset E360 / SWZ-PTT en / English for Internet / telephony.fm / 30.08.2006
Version 4, 16.09.2005
Menu guidance
Your telephone's functions are accessed
using a menu that has a number of levels.
Main menu (first menu level)
¤To open the main menu, press §Menu§
with the handset in idle status.
Accessing a function
¤Scroll to the function with the control
key q and press §OK§ or enter the digit
that appears before the function in the
menu overview (page 9).
The corresponding submenu (the next
menu level) is opened.
Submenus
The functions in the submenus are dis-
played as lists.
To access a function:
¤Scroll to the function with the control
key q and press §OK§ or enter the digit
combination that appears before the
function in the menu overview
(page 9).
Briefly pressing the end call key areturns
you to the previous menu level / cancels
the operation.
"Swisscom Voice Portal" key
>Press the direct dialling key.
You will be directly connected to the
Swisscom Voice Portal.
The access number can be repro-
grammed.
Correcting incorrect entries
uNavigate to the wrong input with the
control key if ûis displayed.
uPress §Delete§ to delete the character to
the left of the cursor.
uInsert new character to the left of the
cursor.
uWhen entering the time and date etc.,
edit the flashing character.
You will find explanations for the symbols
and typographical conventions used in
this user guide in the appendix, page 29.
Note:
This key allows you to connect to the Swisscom
Voice Portal, where you can activate additional
services such as call diversion (Service 21, 61
or 67), call waiting (Service 43) or three-party
conference with a simple voice command. You
can also use voice command to access current
sport, news and weather information.

14
Using the directory, direct dialling keys and lists
Gigaset E360 / SWZ-PTT en / English for Internet / telephony.fm / 30.08.2006
Version 4, 16.09.2005
Using the directory, direct
dialling keys and lists
A directory, last number redial list, SMS list
as well as calls list are available.
You can save up to 100 entries in the direc-
tory.
You can create a personalised directory for
your own individual handset. However,
you can send the list or individual entries
to other handsets (page 14).
Directory
You can store numbers and the associated
names in the directory. With the handset
in idle status, open the directory by press-
ing the skey.
Length of an entry
Number: max. 22 digits
Name: max. 16 characters
Storing the first number in the
directory
s¢Dir empty New entry? ¢§OK§
¢~(Enter number) ¢§OK§
¢~(Enter name) ¢§OK§
Storing a number in the directory
s¢§Menu§ ¢New Entry ¢§OK§
¢~(Enter number) ¢§OK§
¢~(Enter name) ¢§OK§
Selecting a directory entry
sOpen the directory.
You have the following options:
uUse qto scroll to the entry until the
required name is selected.
uEnter the first character of the name, or
scroll to the entry with q.
Dialling with the directory
s¢q(Select entry; page 14) ¢c
Managing directory entries
You have selected an entry (page 14).
Editing entries
§Menu§ ¢Edit Entry ¢§OK§
¢~(Change number if required)
¢§OK§
¢~(Change name if required) ¢§OK§
Using other functions
The following functions can be selected
with §Menu§ ¢q:
Use Number
Edit or add to a stored number. Then
dial or use other functions with §Menu§.
Show Number
Show number.
Delete Entry
Delete selected entry.
Send Entry
Send a single entry to another handset
(page 14).
Delete List
Delete all directory entries.
Send List
Send the complete list to another hand-
set (page 14).
Sending the directory to another
handset
Requirements:
uThe sending and receiving handsets
must both be registered on the same
base station.
uThe other handset and base station can
send and receive directory entries.
s¢q(Select entry; page 14)
¢§Menu§ ¢Send Entry / Send List ¢§OK§
¢~(Enter the internal number of the
receiving handset) ¢§OK§
A successful transfer is confirmed by a
message and confirmation tone on the
receiving handset.

15
Using the directory, direct dialling keys and lists
Gigaset E360 / SWZ-PTT en / English for Internet / telephony.fm / 30.08.2006
Version 4, 16.09.2005
Adding a displayed number to
the directory
You can copy any numbers to the directory
that appear in a list, for example the calls
list or the last number redial list.
A number is displayed.
§Menu§ ¢Copy to Directory ¢§OK§
¤Complete the entry (page 14).
Direct dialling keys
You can store particularly important
phone numbers, for example emergency
numbers, under the 3 free direct dialling
keys.
You dial the stored direct dialling number
by pressing the corresponding direct dial-
ling key and the talk key c.
Refer to the font table (page 32) for infor-
mation on how to enter the text correctly.
Storing/changing direct dialling keys
You can assign external phone numbers
and the internal call function to the direct
dialling keys.
§Menu§ ¢Settings ¢§OK§ ¢Direct Diall.
Keys ¢§OK§ ¢I: <no entry> ¢qSelect
direct dialling key (I to III)
Entering/changing an entry
You have selected a direct dialling key.
§Menu§ ¢Edit Entry ¢§OK§
~Enter or edit the number if
required and press §OK§.
~Enter or edit the name if
required and press §OK§.
Using other functions
The following functions can be selected
with §Menu§ ¢q:
Delete Entry
Delete selected entry.
Call. Home Internal
Pressing this key results in all registered
handsets being called.
Use Number
Edit or add to a stored number. Then
dial or use other functions with §Menu§.
Last number redial list
The last number redial list contains the ten
numbers last dialled with the handset
(max. 22 digits). If one of the numbers is
in the directory, then the corresponding
name will be displayed.
Dialling from the last number redial list
§Redial§ Press the display key.
qSelect an entry.
cPress the talk key. The number
is dialled.
Managing entries in the last number
redial list
§Redial§ Press the display key.
qSelect an entry.
§Menu§ Press the display key.
The following functions can be selected
with q:
Use Number (as in the directory, page 14)
Copy to Directory (as in the directory,
page 14)
Delete Entry (as in the directory, page 14)
Delete List (as in the directory, page 14)
Note:
When a phone number is displayed on the
screen, you can programme this number onto
an unassigned direct dialling key by pressing
and holding the relevant direct dialling key.

16
Using the directory, direct dialling keys and lists
Gigaset E360 / SWZ-PTT en / English for Internet / telephony.fm / 30.08.2006
Version 4, 16.09.2005
Opening the message list with
the display key
You can use the display key ‘to
open the SMS list, the network mailbox (if
your network provider supports this func-
tion and the network mailbox is set up for
speed dialling, page 23) and the calls list.
An advisory tone sounds as soon as a new
entry appears in a list. A message appears
in the display. If you press the display
key ‘, you will see all the lists that
contain new messages. If only one list
contains new messages, this list will be
opened automatically. Press any key and
the message advising of new messages is
no longer shown on the display.
The display key ‘is faded out when
the list is exited. Access to the network
mailbox can be initiated with key 1on
the handset (if the handset is set up for
speed dialling), while the SMS list and the
calls list can be opened via the menu (see
page 9). The display key ‘is availa-
ble again after a new entry in one of the
lists.
Calls list
Requirement: CLIP (page 11)
The calls list contains
umissed calls
Depending on the list type selected, all
numbers of the last 20 missed calls are
stored.
The list is displayed as follows:
Number of new messages + number of old,
read messages.
Selecting the list type for the calls list
§Menu§ ¢LNO1Q¢Enter
digits: 1= missed calls ¢§OK§
The entries in the calls list are preserved if
you change the list type.
Opening the calls list
‘¢Calls List: 01+02 ¢§OK§
qSelect entry.
The last call received is displayed as the
first entry in the calls list.
List entry
Example of a list entry:
uStatus of entry
New Call: new missed call.
Old Call: entry already read.
Only for list type "all calls":
Call Recv.: Call was answered
uNumber or name of caller
You can add the number of the caller to
the directory (page 15).
You can delete the current entry with
§Menu§ ¢Delete Entry.
You can show the date and time of the call
(if set, page 8) with §Menu§ ¢Date and Time.
Dialling from the calls list
Open the calls list (see page 16).
qSelect an entry.
cPress the talk key. The number
is dialled.
Note:
If calls are stored in the network mailbox you
will receive a message if the appropriate set-
tings have been made (see the network mail-
box instructions of your network provider).
Calls List: 01+02
New Call
1234567890
§Back§ U§Menu

17
Using the directory, direct dialling keys and lists
Gigaset E360 / SWZ-PTT en / English for Internet / telephony.fm / 30.08.2006
Version 4, 16.09.2005
Deleting the calls list
Caution! All old and new entries will be
deleted.
§Menu§ ¢Calls List: ¢§OK§ ¢§Menu§
¢Delete List ¢§OK§
¤aPress and hold (idle status).

18
SMS (text messages)
Gigaset E360 / SWZ-PTT en / English for Internet / sms_neutral.fm / 30.08.2006
Version 4, 16.09.2005
SMS (text messages)
Your unit is supplied ready for you to send
text messages immediately.
Requirements:
uCalling line identification presentation
(CLIP, page 11) is enabled for your
phone connection.
uYour network provider supports SMS in
the fixed network (information on this
can be obtained from your network
provider).
uYou are registered with your service
provider to send and receive SMS.
Text messages are exchanged between
SMS centres that are operated by service
providers. You must enter the SMS centre
through which you wish to send and
receive in your unit. You can receive SMS
from every SMS centre that is entered if
you have registered with your service pro-
vider. The registration wizard (page 18)
will help you to register.
Your text message is sent through the SMS
centre that is active. However, you can
activate any other SMS centre for sending
a current message (page 21).
If no SMS centre is entered, the SMS menu
only consists of the entry Settings. Enter an
SMS centre (page 20).
Please remember:
uIf your phone is connected to a PABX,
please read page 21.
uYou must also have registered with
your service provider for receiving SMS
text messages.
uEach incoming SMS is signalled by a
single ring (ringtone as for external
calls). If you accept such a call, the SMS
will be lost. To prevent this, suppress
the first ringtone for all external calls
(page 26).
Registering with the
registration wizard*
You can use the registration wizard to reg-
ister with all service providers whose
number you have entered to send and
receive SMS messages.
Requirement:
uYou must have stored a number for at
least one SMS centre.
When you call up the SMS menu for the
first time, the wizard automatically regis-
ters you with accessible SMS centres
whose number you have entered. You can
also use the registration wizard to register
with SMS centres at a later time.
On first call: §Menu§ ¢SMS ¢§OK§
Later: §Menu§ ¢SMS ¢§OK§ ¢Settings
¢§OK§ ¢Register to allServices? ¢§OK§
You can now receive text messages from
any of the SMS centres whose number you
have entered (page 20).
Note:
When supplied, the number to access the
Swisscom SMS centre (062 210 00 0) is
already configured.
* Depends on provider. Not supported in
the Swisscom network at present.