Ikon Manual
Pencil Sharpener
Operating
Instructions
Please read the following instructions
before operating your sharpener.
lTo be used under adult supervision only.
lSuitable for standard 8mm diameter pencils only.
Cleaning
Regular cleaning will ensure that your sharpener operates eciently.
lUse a small brush (e.g. paintbrush or toothbrush) to clean the cutting
blade. Never use metal objects as this may damage the cutting blade.
lThe shavings tray can be removed and cleaned with water only.
Never clean the main sharpener unit with water or use solvents such
as alcohol or thinner.
Coloured Pencils
lSharpening coloured pencils causes wax to build up on the
sharpener blade.
lWe recommend alternating between coloured and graphite pencils
as graphite will help to clean the blade.
lIf excessive build up occurs then clean the blade as per the
instructions above.
Pull the front plate out until it locks into position.
Push the lever down and insert the pencil.
Turn the handle clockwise to sharpen the pencil.
The auto-stop feature will stop sharpening the pencil
when it has reached the selected sharpness.
Push the lever down and remove the pencil.
Turn the handle clockwise to retract the front plate.
Empty the shavings tray if necessary by sliding it out
from the main sharpener unit.
3
4
5
6
7
DESKTOP
Place the sharpener
on a flat surface,
securing it in place
with the desk
clamp if
necessary.
1
2
Replacement Blades
As with all sharpeners, frequent use will eventually blunt the
sharpener blade. For replacement blades, please contact your
supplier quoting product code 40908.
For blade replacement instructions, go to
www.snopakebrands.com.
4
6
+
2
7
3
+
5
For troubleshooting and product support, please visit www.snopakebrands.com
Model Product Code Replacement
Blade Code
Compatible Pencil
Size(s)
Ikon 40100 40908 8mm
