Synargy SMART COMFORT RENO User manual

RENO
MASSAGE CHAIR
QUICK START GUIDE &
OPERATING INSTRUCTIONS

QUICK START GUIDE
Remove any items from pockets and sit into the
chair in a comfortable position.
Press the power button, and the chair will begin
massaging in automatic mode.
You can enjoy the automatic mode as it is, or
read these operating instructions to learn about
more advanced operation.

BASIC CONTROLS
• Power button turns the chair
on & o
• The LED display indicates
the current mode and timer
• The I, II, and III LED lights
indicate which specific
massage functions are being
used (details on page 5)
• Air button adjusts the
pressure from airbags
between light, strong or
o (no lights)
• Heat button turns the
footrest heater on or o
• & buttons will recline
the chair back and forward,
hold and release to adjust
• button will recline
the chair into Zero Gravity
horizontal position. Press
again to return to upright
• The USB port at the
bottom can be used to
charge small devices
such as smartphones

AUTOMATIC MODE CONTROLS
• Auto button cycles
between three automatic
modes. The selected
mode is indicated by the
LED display screen:
Mode Description Screen Display
Auto 1 Full body mode A1
Auto 2 Neck & shoulder mode (with some back & waist) A2
Auto 3 Back & waist mode (with some neck & shoulder) A3

MANUAL MODE CONTROLS
• Mode button cycles
between back roller
techniques. The selected
mode is indicated by the I,
II and III LED lights:
• Width button cycles between three back roller width
settings, indicated on the screen with D1, D2 and D3.
(Can be used during Tapping, Knocking and Shiatsu modes)
• Speed button cycles between three back roller speed
settings, indicated on the screen with P1, P2 and P3.
(Can be used during all Manual modes)
Mode LEDs Display
Kneading
Tapping
Kneading + Tapping
Knocking
Shiatsu
(flashing)
Tapping 2
(flashing)